After installing the 2013LT application the Multiline Text Function worked fine, however, now it will not function at all. "Cannot find Shell Program"--is what displays at the Command Line when attempting to create a text box in a file.
View 2 Replies
I've recently noticed that my multiline text boxes in old drawings have been splitting themselves into multiple multiline text boxes. They aren't exploding into single line text because it won't let me use the convert command to turn them into multiline because they are already multiline.
I know the dimassoc command can be set to a certain value to cause all dimensions to explode but is there some kind of command that could have change itself and is causing this problem?
Today I got an error message when trying to export a photo. It has never happened before. Win32 API error 2, system cannot find specified file when calling Shell Execute ExW from AG Workspace. shell execute
View 2 Replies View RelatedI use AutoCAD 2008 LT. I have a problem when trying to use multiline text. The text box will only allow me to write vertically, but when the text is completed, by left clicking on a grip and changing the rotation angle to 0 degrees, it reads horizontally. However, if I try to amend it, vertical text is the result. I do not have this problem with single line text. Whilst it is possible to read vertically, it is time wasting.
View 9 Replies View RelatedI have a situation where I'm adding some text and want to identify the part with a part#. For example Item 1, I want to add a circle to the number one for it to stand out on my text notes.
The same goes for each line item I have for my text note. For example, if I have 5 lines of text notes, I want to be able to put for example a triangle around 1 thru 5 line items.
1.
2.
3.
4.
5.
I've attached screen shot to see what I'm looking to do. By the way used multiline text for my drawing notes.
how to create the end of a multiline text, soft or hard return or control enter
View 1 Replies View RelatedI used to have a lisp routine for selecting multiple strings of single line text and converting them to a single multiline text box. I think there was even an express tool in previous versions of CAD to do this. I am in 2011 now, and I can not find a command for this. I would even settle for simply changing single line to multiline without adding multiple strings.
View 8 Replies View Relatedis there a shortcut/keystroke to quickly access the multiline text command?
View 1 Replies View RelatedThis has been happening intermittently but now seems to be permanent. When I slect the Multiline tool, click to place the text box, then click to place the other corner the box ignores the size I set and snaps to as wide as the screen and one line high. It does this in several different drawings so it is not native to one. If I enter text and deselect I can adjust the handles and alter the text.
I have attached a screen shot to show. It doesn't matter how close or far I am zoomed in on the drawing.
For what it's worth I do not like the way the ribbon panel controls handle text, it usually takes multiple tries to get it to change the text height. I usually resort to using the Properties flyout but that adds mutltple steps to the process.
How to combine more than multiline text in one?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am using a multiple line attribute. I insert the block, fill in the text, and adjust the width of the multi-lines text so the lines are longer and there are fewer of them. I save and close the file, then re-open some time later and the width of the multli-ine attribute has reverted back to a different width (shoter) - I am assuming it is the default width that I set to the attribute. Is there a setting to stop this from happening? Is there something I should do when I create the attirbute?
View 2 Replies View RelatedRunning PSE 9 under Mac Snow Leopard.
I have a family photo including many text layers. I'm trying to edit the text in a selected large multi-line text layer. I'm following the steps from the appropriate PSE article, but I always end up creating a new layer and the red/green no-go/go option. I thought I should just be able to double-click the text layer and start editing.
Underlining the “single text” and “multiline text”
To underline the “single text”, we use the %%U but this sounds not to work with the “multiline text”!
What I should use to underline the “multiline text”?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am trying to create an attribute with multi-text and I am unable to get the text to wrap. I have the boundary width option checked and specified, but the text doesnt seem to care and keeps right on going....
View 4 Replies View Relatedi'd like to turn single texts into a multiline tex and KEEPING THEIR INDIVIDUAL COLOURS & TEXT SIZES.
View 4 Replies View RelatedI have been using the multiline text quite successfully. When i was playing with inserting tables, i rotated my text in the tables.
Now when i use my multiline test on my plans they also automatically are set up vertically and not horizontally anymore.
Where can i rectify this. On the properties the rotation angle is set at 0 degrees.
Attached is a block that I use a lot. Originally I had two separate single line text attributes for the "title". I modified it to have a single multiline text attribute instead. I want this attributes text box width to stretch along with the line below it, so that long text strings will automatically adjust to single or multiple lines as necessary and not run off the end of the line. As it stands now I have to stretch the line and then adjust the width of the text box to match.
Also it would be nice if the bulk of the text would stay on the bottom line and only the "overflow" would move up to the next line.
Within the enhanced attribute editor dialogue, I am wondering if there is a way to open up the multiline text editor with a keyboard shortcut, vs.. having to mouse click on the open editor box? The reason being, I can quickly fill out attributes that are single line text, but get hemmed up with having to stop and open up the multiline....
View 3 Replies View RelatedI use Autcad Architecure 2010 on my computer.
After I created or made a multiline text, the ribbon in autocad is getting all blurry. None of the icons in the ribbon will work (see attached picture).
I always have to shut down Autocad and restart it to continue my work.
Problem: Create a dynamic block with visibility, use a Multiline Attributes for text entry in to the block. I create multiple lines of text when editing the block in model space. Either with gripping the txt window width or use "Enter" to define multiple lines.... I proceed to edit the block slightly and when I close and save changes......All ML Attributes default to single line text. In turn i have to re-edit all my text.
Bugs like this are extremely painful. No rhyme or reason to them... Looking for a workaround other than using separate attributes for each line of text.
I draw 3 lines to form an open polyline. They are still in lines, not converted into a polyline.
How do I find the start or end point of the polyline with program? I am thinking to check all points which is not shared by two lines.
Any basic program that would allow me to view folders of photos on my iMac? There used to be a slideshow program you could download for free that offered the simple service of allowing you to click on any given folder and look at each image in a slideshow. There's iPhotos but I don't want to have to pop open iPhoto and add any new pics in those folders as well as add them to photos on my harddrive. I just want to keep my photos in their specific folders on my harddrive and be able to boot up a slideshow program to view them whenever folder I want to.
View 6 Replies View Relatedcan't find my icon even in program files.
View 3 Replies View RelatedAfter installing Gimp 2.8.4 when i launch program all i get is the Layer-Brushes toolbox. I can't find the main window?
View 1 Replies View RelatedI have a drawing which has hundreds of levels on and i'm trying to establish what the MEAN level is and the AVERAGE level. I thought the best way might be to extract the text to excel and perform it there but at the moment the only way i can do it is to copy and paste the text and its taking me forever. Is there a way to either a) extract text to excel or b) calculate a MEAN value based on texted selected?
View 2 Replies View RelatedA program that prompts:"select objects:" then I can select some objects like as text, line, circle,... after that program find all texts in selected items and swap text
swap means: xxx/yyy ===> yyy/xxx ; "/" is a divisor
swap function for one text is here:
(defun c:swap ( / pos ent el txt)
(vl-load-com)
(if(null #div#)(setq #div# "/"))
(setq #div#
(if(=(setq tmp(getstring(strcat "
Divisor character: <"#div#"> ")))"")
#div# tmp
)
[Code]....
but I want a program to prompt me like this:
(prompt "Select objects:")(terpri)
(setq a (ssget '((0 . "TEXT"))))
and gets divisor char </>:
after that:
(setq n (sslength a))
(repeat n
....
)
repeats n times, n=number of texts in my selection
I'm on Autocad 2011, everytime i try to insert a text a notepad program always appear, how do i fix it so i can use autocad text editor program
View 3 Replies View RelatedI have a bunch of parts drawings created in LT 98 that I am now editing in LT 14. For the most part I haven't had issues. However, I have been having a big issue with the Text function. It doesn't matter if I am trying to enter new text (Multi or Single line), or if I try to edit the existing text. Either way, the program immediately locks up & will not snap out of it.
View 2 Replies View RelatedHow it got in AutoCAD 2009 when a word FIND ZOOM and stay on it rather To ZOOM EXTEND
View 1 Replies View RelatedMy method creates a attribute, how to a create a multi-line attribute?
using (Transaction trAdding = dbCurrent.TransactionManager.StartTransaction())
{
BlockTable btTable = (BlockTable)trAdding.GetObject(dbCurrent.BlockTableId, OpenMode.ForRead);
string strBlockName = "ATTRBLK" + System.Convert.ToString(blockName);
try
{
if (btTable.Has(strBlockName))
[Code]....
I have drawn same multyline ( style 1) in two differance layers. Now I need to change the multyline style Type 1 to Type 2 in one layer without affecting to the other layer style.
Is thear a quick way to do this.
