I'm trying to add a stroke that's aligned to the outside of my path. It appears to be offsetting the stroke *and* moving anchor points at the same time. It does the same kind of thing when I align the stroke to the inside. It is fine when i align the stroke to center. The one that is offset to the top-left is the align-inside one.
View 7 RepliesI have a bent path, standard 90 degree corner. Illustrator CC is not allowing me to align the stroke to the inside of the path/corner. The inside and outside options are grayed out when this path is selected.
Of course, I can create a shape and then all three options for path alignment are usable. But if I cut a gap into the path of that shape it instantly reverts to a center aligned stroke. I can create what I need manually. But this is a time addition.
I'm having trouble making adjustments to my compound path/shape, as I'd like to outline the inside of the shape with a stroke - but this doesn't seem possible as the stroke always surrounds the outside too.
So: I've got a simple rectangle with white fill, with a rectangle-window hole cut out of it using the compound path action so you can see the layers beneath. Now I want to stroke the window hole, but NOT the outside of the entire rectangle. I'd be happy to split the shape up and tried various options like divide, edit in isolation mode, expand (button is greyed out), all the pathfinders - but none of them allow me to do this only to the inside part of the path.
How I can perform this action? I'm working in CS5 and CS6.
Is there a way or an option I am missing to convert my regular paths to a path stroked with a brush profile,while maintining the proper stroke width?
For instance, I have a regular line with a stroke of 5 and then add a brush profile, which then converts the original stroke to whatever the brush was made at.
Look at the photo I provided.
The rectangle will not to the circle correctly or evenly. This has been happening too much recently and I move on and find a way around it. I've had enough though.
I've turned off and on Snap to point, Snap to grid, Smart guides. Everytime I drag the rectangles edges to the circles, they magically somehow snap back to the original spot or further than I wanted it.
Nothing fixes it. I'm extremely furious! Why is the edge of my circle able to be there but not the edge of the rectangle? I've even tried to increase and decrease the shapes. Still, nothing.
I am trying to animate png images along a path. I make the path as a mask to the object, and then copy the masks path to the objects position, and when I do the object moves somewhere off the camera view and the path is twice as big.
View 4 Replies View RelatedI really enjoy this new draw inside feature in Illustrator. But, I find that it does not always work. It seems to be grayed out sometimes. For example, I have drawn a shape with my Wacom tablet using a blush. I then converted it to a shape instead of keeping it a stroke by expanding it. But it will not allow me to now draw inside of it, even though it is a shape.
View 8 Replies View RelatedI am using Photoshop CS6. I am not in quickmask, I am using the essentials pallete I am creating a path not a shape, and I have a new blank layer selected. When I right click on my path, stroke path is available but it just won't do anything. I have been able to get it to work by going to my paths palette and selecting stroke path from there but that is a lot more time consuming.
View 13 Replies View RelatedWhen increasing the width of a stroke around a shape the stroke is not centered... WHY DOES IT DO THIS??? Even if I use the controls in the stroke window to change this it sill plays up.
View 2 Replies View RelatedWhen trying to change the stoke alignment on an object, even with the options available to clicked on, I am unable to.
The panel looks like this but when I click on any other alignment It reselects "align stroke to center"
If I simply draw a line and want to align the stroke to one side (instead of the centre) how do I do this?
1) Giving a path offset effect.
I played with this, but didn't got me any result. I mean by giving the offset different values, I didn't saw the stroke moving to one side.
2) Creating a new brush for this.
3) Something by using an invisible rectangle.
At this moment, not one method have worked for me
What I basically want is to create those 'lineal' lines in the wing below. I already made an outline of the ribs and control of alignment of strokes gives me more options and flexibility to draw this.
I've converted the type to outlines but the choices to align the stroke to the outside and inside stay grayed out.
View 2 Replies View RelatedI created a square in which I have to draw vertical lines in it. I want the first line to start at 2.5 cm from the left segment of the square.
In a different way to say it just to be clear enough, I want to align the segment (inside the square) from the left vertical line of the square, put 2.5 cm to the right, and then there's my line.
When I try to align it using the align tool, I use the square as a key object. But it select ALL the square, so it puts my line 2.5 cm but to the far right of the square, outside my artwork. I'd want to select only the left line of the square.
Simply press 'b' for the bezier select tool, and click where you want a line to begin, and click again where you want the line to end. Now, you can move the line around until you get it perfect by clicking on the dot on either end and dragging it with the mouse. Isn't that neat! You can even click on the middle of the line and bend it! Try it! You can draw any shape with it.
If you make a mess, just press ctrl + z and undo your last changes. The GIMP remembers a very long list of changes, so you can go backwards step by step.
When you are happy with your line, or lines. just click 'Edit' --> 'Stroke path'. A box will open to allow you top choose settings for exactly how you want your line stroked. You can just leave it the way it is, or you can make GIMP do almost anything with your line. GIMP will remember your previous settings too, and offer you the same settings for the next line. When the box mentioned above pops up, I choose my desired settings and hit the "Stroke" button, absolutely nothing happens. No matter how thick I tell it to make the line, no line ever appears.
Why is it that on some objects the option to aline the stroke outside is grayed out.
View 6 Replies View RelatedI make a compound object, then when I resize it, it moves anchors around. Note the corners on the 3rd "8" -- they're pinched together. This is happening on a lot of different object
Edit: There are no "snaps" enabled.
I have a problem with my brush and pencil tool. Whenever I want to draw an object without a stroke and just a fill, it immediately assigns me a stroke in either the colour my fill is, or, if I'm using a gradient, in black. It doesn't have that problem with the pen tool though. I also checked in my presettings and my Transform plaette that the "Align to Pixel Grid" option is unchecked. Also, the "New Art has basic appearance" is unchecked.
View 2 Replies View RelatedI'm working on a poster and for a special printing process am supposed to add a 2 point inside stroke to the type. However, Illustrator has that option grayed out in the appearance panel when I try to add it to the type even when I create outlines.
View 2 Replies View RelatedI'm pretty new to Illustrator so there's a chance this is a stupid question, but I'm pretty stumped on this. If I have a path with a stroke that is set to either inside or outside, it disappears if I draw something inside of it to convert it into a clipping mask. The stroke shows up again if I align it to center, but even this seems to have some quirks as it won't display multiple strokes. After searching the web for a bit this is the best description/example I've been able to find for this problem:
[URL]....
Anyside strokes or multiple strokes to work correctly in this scenario? If not, is there a logical reason for this or is there a bug?
I've got some letters with a black inside stroke. These are 3D letters, therefore the stroke must be in the inside otherwise it spills out the edges if I put it outside or centered.
I've tried adjusting the cap/limit and all other options on the stroke menu without luck How can I fix these corner errors? I'm on Illustrator CS5.
how to create in Illustrator something like that pictureabove?
View 7 Replies View RelatedI can't set the stroke of a path to anything less than 1 pt.
Though a dragged path (by an endpoint) snaps to a point on another path, when I lift my finger, the dragged point and path jump a small distance away.
Aligning two separate paths to their common (e.g. top left) endpoints also leaves the two endpoints slightly displaced from each other.
When I pull a regular 2-color photo from the web and use the tracing option, selecting ignore white, then expanding it into a path, it will not fill correctly. Instead of filling the object created, it fills the entire photo area of the original image. URL....
In the video, you'll notice that the fill option after expanding is marked with a "?".The goal here is to, after expanding, fill ONLY the image of the cursor.
I mostly use photoshop for lineart on some pictures I do but the biggest problem is that the lines are not really smooth. I want to Use Illustrator just to ink the pen tool paths and then return it to photoshop to color. This is a recently finished picture I did using the Pen tool traced on top of a sketch I scanned. I want to know if there is any way I could do something similar to "Stroke path" in Illustrator so that I could get this picture done with crisper lines and if not.
View 2 Replies View RelatedFor example, if I created a square and wanted the 2 sides and bottom to be 1 pt stroke and the top to be 0.5 pt stroke or no stroke - is this possible?
View 6 Replies View RelatedThere is a way inside Illustrator to send back or front the anchor points of a path?
In the image below was createad with Pen Tool starting from left to right but if i want to bring some of these crossing points back and forth from each other, is it possible?
Like in the middle one to send it back from the other behind it?
I'm unable to adjust the weight of a path. Here's a 40 sec video (no audio, 1920x1080) that demonstrates I know how to adjust the stroke weight on a path, followed by a demo of it not working when I try to adjust it:
[URL]....
Here's what I do in the video:
First, on a path that allows the change:
Select an elipse.Increase the stroke weight of the elipse.Control-Z to undo.Decrease the stroke weight of the elipse.The above demonstrates I know how to adjust the path weight (at least I think it does).Next, on the path that doesn't allow the stroke width to be reduced: Select path. Increase stroke weight to demonstrate it increases.Control-Z to undo.Decrease the stroke weight to .25 to demonstrate it does not reduce in size.
What do I need to do to decrease the weight of the path I am trying to adjust?
i have a line art drawing and have expanded the strokes to paths. now i'd need to turn part of the paths back to strokes and can't find an (easy) way to do it.
inserted is an example of the situation. instead of closed path i'd like the form to be a stroke.
If I wanted to change an objects stroke (outline) color for just part of the object, what would be the best way to go about that. Pro tip: Paint bucket tool in photoshop != the best way... it gets all pixel.
View 4 Replies View RelatedIf I have an object that has a large stroke set to align to inside and I outline that stroke, the resulting inner shape isn't a closed path. While this is easy enough to fix, I was wondering if there was a way to avoid it alltohether?
View 5 Replies View RelatedDrew a path in Illustrator - made it a compound path. Made a clipping mask with another object inside it. When saved as a pdf, there are these strange white gaps in the stroke of the path.....
View 4 Replies View Related