InDesign :: Stroke Only One Side Of A Square?
Dec 1, 2010Is is possible in InDesign to have a stroke on only one side of a square? And if so, how do i go about doing that?
On Mac OSX 10.6.4, InDesign CS5
ADVERTISEMENT
AutoCAD LT :: Create Template For Cutting Square Hole 125 Mm On A Side?
Jun 29, 2012Here's something that should be simple, I want to create a template for cutting a square hole 125 mm on a side.
I have gone into Drawing Utilities and set the units to millimeters. I drew a square 125 units on a side.
In paper space, I selected a template that is 11" X 17". I set the scale to 1:1. I thought that that would give me a sheet I could print out ledger size with a 125mm square drawn on it, but no, it is not even close. As near as I can figure, the square is 125" on a side in paper space.
Photoshop :: Object Square Stroke
Oct 15, 2013I would like to do the stroke around the object like the photo below (the 1st one); there's the square corner stroke around the dress. How can i do this type of stroke? Can it be created in Photoshop CS6?
Currently i can only do the stroke that in-line to the object like the 2nd photo, but i would like to change the style to be corner-liked style.
Photoshop :: Stroke Outside With Square Corners
Mar 21, 2008I'm trying to find a simple way to make a border around an image, but with square corners. Stroke does what I want it to, but I want the border on the outside and the corners square, not round- which is what I get when I use stroke on the outside.
View 2 Replies View RelatedPhotoshop :: Stroke Outside With Square Corners
Mar 21, 2008I'm trying to find a simple way to make a border around an image, but with square corners. Stroke does what I want it to, but I want the border on the outside and the corners square, not round- which is what I get when I use stroke on the outside.
View 7 Replies View RelatedPhotoshop :: Stroke With Square Corner - How Do You Do This?
Dec 13, 2004I am trying to place a photograph on a white background and have the image wrapped in a black border. The image is on it's own layer so I thought the easiest way was to use "Stroke" in "Layer Styles". But when I do this the corners are always rounded off. I have tried changing the brush styles, but I always get a round corner.
View 4 Replies View RelatedIllustrator :: How To Align Stroke To One Side (instead Of Center)
Jan 27, 2014If I simply draw a line and want to align the stroke to one side (instead of the centre) how do I do this?
1) Giving a path offset effect.
I played with this, but didn't got me any result. I mean by giving the offset different values, I didn't saw the stroke moving to one side.
2) Creating a new brush for this.
3) Something by using an invisible rectangle.
At this moment, not one method have worked for me
What I basically want is to create those 'lineal' lines in the wing below. I already made an outline of the ribs and control of alignment of strokes gives me more options and flexibility to draw this.
InDesign :: How To Create Artwork For Stickers To Cover Front And Side Of A Freezer
Feb 13, 2014I am trying to create the artwork for stickers to cover the front and side of a freezer. I have created the front panel which consists of a block of colour along the top and bottom (with logo in top panel) and then an illlustration in the middle. Now, I want the blocks of colour and illustration to carry on seamlessly to either side to cover the 2 side panels (which are the same height but different width from the central one). Should I create in 3 separate documents and how do I make sure that I follow the illustration at exactly the point where it finishes at either side of the central panel? I haven't been using InDesign very long and I cant work it out.
View 3 Replies View RelatedInDesign :: Stroke Is Getting Bigger - Can't Turn It On Or Off?
Apr 7, 2014I'm having this problem with the stroke weight on my objects staying the same pixel size when I adjust their size. I had this issue in 5.5 and learned how to fix it by the 'Transform Object' panel and deselecting 'Adjust Stroke Weight When Scaling'.
Well, that's turned off in CC, but the stroke is still obviously getting bigger when I increase the size of my object. The stroke weight still says it's the same, but a person can easily tell that the stroke is bigger. And, the 'Adjust Stroke Weight When Scaling' is greyed out. I can't turn it on or off. Something is going on.
InDesign :: Cannot Select Stroke Control Or Swatch Panel
Apr 22, 2014I created a line (stroke). I am following along with the Pluralist Brochrue creation video tutorial. I cannot click on the stroke weight options in the toolbar, I cannot select or make changes to the swatch panel options, even though the line is selected.
View 1 Replies View RelatedInDesign :: Eyedropper Tool Exchanges Fill With Stroke
Feb 26, 2014I try to add a predefined character style via eyedropper tool to another text. First i simply select the tool and click on the previously marked text.
Now the tool instead of picking the predefined characterstyle exchanges the current textfill with an appropriate textstroke.
I've already reset my preferences and short of a complete new installation of InDesign i don't know what to do.
InDesign :: Place A White Background PSD On And Get Black Stroke Around The Edge?
Apr 15, 2014The stroke only shows up when I save the file as a pdf as I zoom in the line gets smaller and smaller but never goes a away. In InDesign and on the PSD file the edges look fine just all white around the "horsefly"
View 4 Replies View RelatedGIMP :: Make Free Select Non-square Selection Perfect Square
Mar 22, 2013I used the free select tool to free select an area of an image that is not a square (odd shape), how do I make that selection a perfect square if pasted to new image or new layer??? rectangular would be fine too...
View 14 Replies View RelatedAutoCAD Civil 3D :: R2013 And R2014 Side By Side / Geotechnics Module Fail?
May 23, 2013WS with R2013 & R2014 installed side by side.
R2013 is stating on start up that the Geotechnics module has been loaded and displays the Tab for it.But I haven't installed the Geotechnics module for 2013 yet and it doen't work.
AutoCAD 2013 :: The Application Has Failed To Start Because Its Side-by-side Configuration Is Incorrect
Jan 3, 2014I downloaded AutoCAD on my windows 7 home premium,but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.
View 1 Replies View RelatedAutoCAD 2010 :: Plot Two 12x18 Sheets Side By Side On 36" Paper?
Mar 15, 2012I've got to plot several "half-size" sets of drawings (originally 24x36 drawings) and I am trying to minimize paper waste. I thought there was a way to set the drawings to fit multiple copies side by side but I am at a loss right now.
Civil 3D 2011 Version 2.1
Win 7 x64 SP1
Intel Core i5 3.33 GHz
4 GB RAM
AutoCAD 2013 :: Application Has Failed To Start Because Its Side-by-side Configuration Is Incorrect
Jan 3, 2014I downloaded AutoCAD architecture 2014 on my windows 7 home premium, but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect.see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.
View 2 Replies View Related3ds Max Animation :: Skin Morph In 2013 - Skewing Vertices Side-to-side Locally
Jan 4, 2013The problem I'm having with Skin Morph is that it's skewing my vertices side-to-side locally.
I'm using Skin Morph to better preserve the volume around the two joints of each finger of my hand model (See Arm1).
The two skin morph targets were created for the index finger while it was in the same position as the second image (Arm2).
I repeated this process, creating skin morph targets for the other two joints on the three other fingers and on the thumb.
The problem comes when I rotate the knuckle joint in any axis, in the third image (Arm3) I've rotated the knuckle downwards and you can see the vertices affected by the Skin Morph modifier have skewed to the left. When I turn the modifier off the vertices go back to their original position - so the problem isn't being caused by something like non-uniform scaling of my model (I reset the transforms before skinning).
The fourth image (Arm4) just shows the basic child/parent relationship that I've setup with the Bones and SplineShapes.
The fifth images show the (perhaps strange) position of the Driver Bone Matrix and the Morph Bone Matrix which could be constributing to the problem somehow.
I've uploaded the file so that you can explore my scene. armrigskinmorphproblems.zip
3ds Max 2013 64-bit Student Version
nVidia GeForce GTX 560
Windows 7 64-bit
Intel i7
AutoCAD 2013 :: Application Has Failed To Start Because Its Side-by-side Configuration Is Incorrect
Nov 12, 2013I have just updated to Windows 8.1,(32 bit) and when I try running Autocad 2013 I get this message:
C:Program FilesAutodeskAutoCAD 2013acad.exe
The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
what the "application event log" is or the "command-line sxstrace.exe".
AutoCAD Architecture :: Model / Paper Space Display Side By Side Within Drawing?
Jul 25, 2012Is it possible within the drawing to have model space and paper space displayed side-by-side like two vertical split screen viewports?
View 3 Replies View RelatedPhotoshop Elements :: Get Two Photos Side By Side To Merge One Person Into A Group Shot?
Sep 17, 2012I need to put two pictures side by side to merge one person into a group shot. I had it once, but, the image of the one person was too big, and I could not figure out how to put that picture back and get another one to try.
View 1 Replies View RelatedPhotoshop :: Button To Show Images Side-by-side Missing From CS6 Toolbar
May 11, 2012In Photoshop CS6, a very important button is missing from the toolbar — the one to show two images side-by-side or above-and-below, and multiple images in other arrangements. I need this button — it’s an important part of my. (BTW, the button is still in Illustrator CS6.)
View 7 Replies View RelatedPhotoshop :: Editing Photo Face - Left Side Is Lighter Than Right Side?
Sep 2, 2012Im having a problem editing a photo 'face' one side 'left' side is lighter than the right side because of lighting. I was wondering If I could get both sides even prefably the lighter side like the normal side.
Is this possible? Because everytime I try edit the lighter side it still remains lighter.
Photoshop Elements :: Combine Two Side-by-side Photos Into Single Photo?
Oct 30, 2013Is it possible to combine two side-by-side photos into a single photo
View 1 Replies View RelatedPhotoshop Elements :: 11 - Compare 2 Photos Side By Side In Full Screen?
Jan 17, 2013Where can you compare 2 photos side by side in Full Screen in Elements 11? Version 9 has this feature under Display View.
View 1 Replies View RelatedPhotoshop Elements :: How To Create A File With 2 Pictures Displayed Side By Side
Sep 17, 2013I have two picture files and I just want to create one file, displaying both pictures side by side. I have been reveiwing all of the functions in my Adobe Photoshop Elements Version 11 and I can't figure out how to do it.
View 2 Replies View RelatedPaint Shop Pro :: X4 Can No Longer Open Multiple Images At Same Time For Side-by-side Comparison
Oct 13, 2011I've just recently purchased PSP X4 since they touted that it was much faster loading and more stable (X3 was horrible about crashing). I continue to be amazed at how they (Corel) can just keep digging a hole instead of actually improving this product. I can see why they continue to lose market share.
1) I can no longer open mulitple images at the same time for side-by-side comparison. The work area now will only accommodate 1 open file at a time.
2) I miss not having the file size included in the data box that appears when you hold the cursor over a thumbnail. It was always handy when downsizing (resizing) photos for posting.
3) It is a pain now to have to go back and forth from the "EDIT" tab to the "MANAGE" tab to view full-sized photos (without having to open one at a time). They really screwed the pooch in X2 or X3 (can't remember) when they got rid of the old Organizer format. It was soooo easy to navigate; you had a screen full of thumbnails, you saw what you wanted and clicked it open....just too easy I guess!!! I was hoping they would go back to it for this version. I know in other forums, this change really rankled a lot of users. They just seem to bounce around trying different things. I wonder who the h*ll they use to test this stuff in-house.
I do like the faster speed, but don't know if I'll go for any more versions after this or not (been here since V.7 when JASC owned it). Big mistake selling if off to Corel. I've just about had it and there is some decent up and coming competition out there nowdays.
AutoCAD 2010 :: Error / The Application Has Failed To Start Because Its Side-by-side Configuration Is Incorrect
Nov 27, 2012I am trying to invoke AutoCAD 2012 and am gettting the following error: CUsersatillgrenDesktopAutoCAD.exe "The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
View 2 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Diesel Expression - Display Area In Square Feet Not Square Inches?
Feb 16, 2010How I can update my diesel expression to display the area in square feet not square inches. See expression below.
^C^Cattdia;0;_-insert;AREABLK;1;1;0;$M=$(getvar,AREA);attdia;1
Paint Shop Pro :: X4 Error / Side-by-side Configuration Is Incorrect
Jan 29, 2013Computer Asus G50VT, Processor Intel Duo T9400, 4 BG Ram, 2 x 500 GB HDD, Nvidia GeForce 9800M GS 512 MMB
I just move from Win VIsta Ult. to Win 8 Pro 64bit.I installed PSP x4. The installation went fine, but when I try to start the program I get the following error:
The application failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more details.
I am missing Visual C++ runtime files, but I installed VC++ runtime files 2005, 2008 and 2010 both x64 and x86. Didn't work.
I also tried to install PSP x3, same error...
I ran sxstrace.exe but it means nothing to me. See the results below:
=================
Begin Activation Context Generation.
Input Parameter:
Flags = 0
ProcessorArchitecture = Wow32
CultureFallBacks = en-GB;en;en-US
ManifestPath = C:Program Files (x86)CorelCorel PaintShop Pro X4Corel PaintShop Pro.exe
[code]....
Paint Shop Pro :: Viewing Same Image Side By Side For Editing
Feb 22, 2012I am sure that you must be able to do it...surely..but how can you see images side by side, so that the original is on the left and the edited on the right?
View 6 Replies View Related