I have googled this and searched forums but cannot find working solution.
I am using cs2.
Created a new file with transparent background (150x75 pixels)
Drew a rounded rectangle shape and added new fill color layer.
Selected text tool and entered text.
In trying to move text to center, I can justify for horizontal but it will not center vertically. Text seems to hop up or down just off center.
When you centrally allign text horizontally and vertically in a text box, the text sits slightly high of the centre. Is there any way of setting an action or setting to deal with this rather than adjusting by eye every time?
View 4 Replies View RelatedI select the text tool then drag it to make a box. I type text into, but it always go to the top. Is there way to make all of the text inside that box automatically center vertically?
View 9 Replies View RelatedUsing: Land Desktop Companion 2009
Issue: Imbeded text in Linetype is automatically orienting the top of the text toward the center of the arc. I have tried to "reverse polyline" to fix this, but the text will not change. Is there a line property that I am missing that will allow the text to orient itself as readable from arc Point of begining to the end?
In the dragged state, I don't want to use 'As Composed' because the label is composed to be parallel to the line, but I want it to flip to horizontal to the view when dragged. This is working fine with 'Stacked Text'
What is not working is the text justification. I want it to remain centre justified, as it is composed. But there doesn't seem to be any option for this when you use the 'Stacked Text' option for the dragged state. I thought that setting the 'Leader Justification' to false might do it, but that just makes it always left justified. Am I missing something here? Is there no 'Top right/bottom right/middle center/top left.....' option for Stacked Text? And if not, why not?
I'm in 2011.
I do a lot of CD designs, and often I have my text centered on the front covers. When I put the text centered, however, PSP is added an extra space to the end of text, so when I center it on the canvas the text is actually off-center to the left. When I go into edit the text, there is no space on the right of the words to delete.
With the text selected this is how it looks: The right edge of the frame should be flush with the right edge of the last 'T'.
The Inset Spacing settings within the Area Type Options drop-down are just too cumbersome. Is there an easier way to center text within a text box like we can do in InDesign? Why they left this out of Illustrator CS6.
View 2 Replies View RelatedI have to copy two lines of text into hundreds of images, and one piece has to be centered, 3 pixels from the top, the other centered at the bottom? Is there a way to make an action that will place things in the center, regardless of image size?
View 1 Replies View RelatedI only see options to center text within the text box.
I want to center my text over the image (the canvas).
It has been a while since I've been here and I REALLY need emergency assistance because my mind has gone completely blank with AGE.
I'm trying to create an action which I will be using for batch processing.
I have an image on which I need to place 3 text layers
The first layer I need to center across the image about 100px from bottom
The second layer I need to center across the image about 300px from bottom
The third layer I need to place about 200px in from the right edge and about 600px from bottom
How I could get the photos aligned in this manner, and how could get that banner in the center with the text? I am using CS5.
View 5 Replies View RelatedI'm trying to work with some transparent text stuff and I can't seem to center it vertically. I have no problem doing it with regular text but using the Horizontal Type Mask Tool it doesn't seem to allow me to do it.
View 4 Replies View Relatedway to center text, or an object in the middle of your picture... I have some text I want in the center, but I can't seem to get it right, always seems to look off to one side.
View 6 Replies View Relatedi have a few hundreds images i need to watermark. The watermark i can do fine. but i have varying image widths.
I want the watermark to be centralised on the image. I also want to batch the process so i'm trying to work out if it's possible to centralise in an action.
I want to place a word into a square box and it should be in the centre of the box. How can I center it? I want equal spaces in between the word and the box for all four sides.
View 11 Replies View RelatedWhen I try to print and select "center" the image does not center on the page. CS5 worked fine originally but after the last update it too seems to have this issue. From what I can observe it seems as if someone thought that showing the printable area on a page was useful and somehow that may have been worked into the calculation of what centered (on the long dimension of a print) is. Engineering aside, if you actually try to sell your work, your client / customer only sees that the image is not centered on the physical sheet. They don't care about the printable area. The only work around I have found is to uncheck "center" and key in 50% of the difference between the actual print size and the actual paper size as a margin. I don't want to scale prints. I need to print to specific dimensions.
For reference I am using a PC running Windows 7 and an Epson 4900 printer
I have wanted to know how to create things like circle gradients from the exact center of the canvas.
I know how to create a gradient, but the problem is, it's really hard to pin point exactly where the center of the canvas is, and sometimes I need it to be as perfect as possible.
I've noticed something keeps happening: when I bring a button in from the design gallery and I change the text on the button from "button" to "click here" or whatever, the text is no longer centered in the button. When I check the Mouse-Over layer, the text is also misaligned. When I go to center the text on one layer, it then gets misaligned on the other!
The only way I've found around it is to make the button in a new document and then cut & paste it into the web page.
I Have A Circle, Is There A Command To Insert Text Into Centre Of That Circle.
I Can Do Enclose Text But Not The Above.
I need to centre text and centre an image layer.
View 2 Replies View RelatedHow to change the text of the short of cut of the Center Line (the CL combonation) its a text we dont use and it wont change.
It doesn't match our text and I don't know if i could change that.
I have created a dynamic block that allows me to change the width and depth by stretch. I have text that the user is prompted to input. I want the text to always be center in the middle of the block no matter how far I pull it left or right. How do I keep it locked in the midpoint of the block.
View 2 Replies View RelatedI've created my first line type (woohoo!) but the rotated V that I used as an "arrow" won't center and I'm having a difficult time understanding why so that I can fix it. I am aware that linetypes like the one I created exist but I wanted the arrows a specific size and distance apart which I couldn't do with the existing linetypes available to me (also I really wanted to try creating a custom one).
In the attached picture:
-the green line is the finished custom linetype
-the red lines are polylines
-the blue text is rotated 90 degrees, set to a text style titled Linetype (simplex font, not annotative, height set to 0 and width set to 1.0), and Justify set to Bottom Center
linetypes-Model.pdf
The finished linetype code is:
*STREAM_LINE_W_ARROW_BIG,Stream_Line_W_Arrow_Big
A,.392629,["V",Linetype,y=-.07619,s=.2,u=90],.207371,-.144393,.011213,-.138787,.011213,-.138787,.011213,-.144393,.392629,["V",Linetype,y=-.07619,s=.2,u=90],.207371
Also, this the first time I've attached a picture, I'm not sure that I did it correctly.
I have no problem getting my text along a path but I am having trouble getting the text and the path to align so that the center of the text element is centered on the path.
Is this possible or do I have to figure out someway to make my path of a certain length so it ends up that the text fits to it perfectly??
Here is a screenshot of my current problem. You can see that the text and the image below it are centered. I then placed some guide lines to make sure my path was also centered. When I placed that text along the path though, it left justified the text when I want it to be centered instead..
In AutoCad when the text is aligned with "Middle Center" has two points, but in C #, I only managed to capture one of the points using: myText_DBText.Position.
View 4 Replies View RelatedI'm sure this is mind-numbingly obvious and I am overlooking it, but when I go to use the rotate tool, the center point of the rotation is defaulting to the center of the artboard, not the selected group of objects. How do I change that to default to rotating on the selection center by default?
PS. This is Illustrator CC (17.0.2) on a Mac running 10.9, if that is relevant.
I'm having some fits with the constrained orbit center. It seems to me that It used to always be in the center of the screen when I would use Shift and CMB. Now it seems to be stuck on the center of my assembly/part. I know that I can hit F4 and long select LMB to re-center but I have never had to do that before the last day or two. I have uninstalled all the Beta Add ins I had installed and I have even uninstalled and reinstalled Inventor Pro 2014.
Is there an option somewhere that puts the default Orbit Center to the center of the screen?
How to keep the “center mark” at the center of the circle or arc?
I wanted to keep the “center mark” at the center of the circle but sounds not to work!
Is there a way? Or do we need to draw it using the “point” command?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
how to make a toolbar button so that when i click it and select a few single text, it will automatically change the text base point to be at "MIDDLE CENTER"....
At the moment, i use to create a button with macro of " ^C^C_text;j;mc "....But the problem is whenever i use this button, i still need to type "MC" at the command prompt.. How to make it so that after i click the button, all i need to to is just select the text..
In Photoshop / Illustrator, when I create a polygon, and rotate it around it's center point it wobbles. When I scribe it inside of a perfect circle, and rotate it around the circle's center point it rotates smoothly. Basically proving that (at least according to these Adobe products) that the center point of a circle is different than the center point of a polygon scribed inside of it.
An image – the dots in the center are the corresponding center points according to Adobe:
[URL].......
This is incorrect according to basic math. Is Adobe aware of this bug?
I'm creating a logo that consists of the word DIFFERENT in text and a shape, a dot (an ellipse) that I want to appear above the I and be vertically aligned with I.
How can I do this?The problem is that I can't see how to identify the point in the text - the centre of the I - to act as the target. I can't seem to get any of the Snap to Object tools to work.
I feel that I should be able to mark a specific point anywhere on a shape or an object and use those points to align.
I suspect that I could achieve the effect that I want by splitting the text characters up into individual objects, than I can align them more obviously but then I set up some other issues with kerning.