How to keep the “center mark” at the center of the circle or arc?
I wanted to keep the “center mark” at the center of the circle but sounds not to work!
Is there a way? Or do we need to draw it using the “point” command?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Is there an option to show center mark of a circle?
View 6 Replies View RelatedI need to find a way how to insert a point or a * on the center point of a hole and put it on a different layer. The reason for this is - I am a CAD tech for a welding shop and we cut parts out of steel and we use the dxf file format for our plasma table to cut parts. For example : if i have a 1 inch thick plate and want to put a 3/4'' hole in the plate the hole will be distorted because the hole is smaller than the material thickness. For these situation we can use the plasma table to burn a point or a dot on the center point of the hole. But to do this the point or dot must be on a different layer in the dxf.
View 2 Replies View RelatedI've never tried this in AutoCAD before. I would like to create a simple rectangular area with a circle in its center. When this area is hatched, the circle is hollowed out. Furthermore, I'd like to have this to insert into a block for stretch action manipulation. Is this possible with AutoCAD 2010?
View 7 Replies View RelatedI need to find the center of a circle that is tangent to another circle and a point on a line. I cannot use tangent tangent radius.
View 4 Replies View RelatedIn Photoshop / Illustrator, when I create a polygon, and rotate it around it's center point it wobbles. When I scribe it inside of a perfect circle, and rotate it around the circle's center point it rotates smoothly. Basically proving that (at least according to these Adobe products) that the center point of a circle is different than the center point of a polygon scribed inside of it.
An image – the dots in the center are the corresponding center points according to Adobe:
[URL].......
This is incorrect according to basic math. Is Adobe aware of this bug?
Is it possible to put a center mark on multiple circles instead of one at a time?
View 9 Replies View RelatedBe there a way to increase the length of the lines in the center mark so that they do go out to at least the diameter of the circle, so that these lines can be used to trim parts of the circle?
View 4 Replies View RelatedI got a photoshop CS5. I know it can plot 3-D pictures. But how?
I want to plot a 3-D tube and mark at it center a set of axis.
I Have A Circle, Is There A Command To Insert Text Into Centre Of That Circle.
I Can Do Enclose Text But Not The Above.
I'm having some fits with the constrained orbit center. It seems to me that It used to always be in the center of the screen when I would use Shift and CMB. Now it seems to be stuck on the center of my assembly/part. I know that I can hit F4 and long select LMB to re-center but I have never had to do that before the last day or two. I have uninstalled all the Beta Add ins I had installed and I have even uninstalled and reinstalled Inventor Pro 2014.
Is there an option somewhere that puts the default Orbit Center to the center of the screen?
How to move circle -centerpoint- to the middle of distance between two rectangles?
I am using autocad 2013.
Is it possible to create a circle from two given tangents and a center-line axis? For example, can this RED circle be derived in AutoCAD?
tan_tan_centerline.PNG
how to dimension from one circle center to another ("A" in the picture)? Or the angle between two circles ("B" in the picture)? My main problem is that i cant snap to a circle center with any dimension type except for diameter and radius, and then i can only dimension one circle on its own.
View 3 Replies View RelatedLet's say I have a square image. Want to make a circle out of the center.
How to I do that? And make it a perfect circle with no hint of oblong?
I'm a photoshop noob but am learning fast. I'm having a bit of trouble doing something that I imagine to most of you is quite straight forward.
Basically, I have a square image (3000px x 3000px) and I want to cut out an exact circle from the centre of the picture. So I choose the Ellipitcal marquee tool and place my cursor approximately in centre of the picture, hold down SHIFT and ALT and drag to the desired circle size. Next I press V to bring up the alignment toolbar hoping that I could centre the selection to the exact middle of the picture but I can't. PS won't allow me to select any of the alignment buttons.
After this I want to take the CUT image and paste as a new image so that I have a just the circle and it's contents and no rectangular background. I'm sure PASTE will do this but I can't get this far.
I'd like to put a circle dead center around an object. How would I do this?
Also (related), I'd like to at times use Corel Draw more like a CAD program and specify the radius when I round corners on a rectangle or give dimensions when I create a new shape (line, rectangle, circle etc). Is this possible?
And in CAD, many times I'll use the divide and break feature to align centers some objects created along a straight line. Is this possible in Corel Draw?
I just got a new Lightscribe drive and I have been having a field day making custom labels for old data discs. Now I have decided I want to make some backups of some of my games so I can put the original discs/boxes into storage finally.
The problem with this is that Lightscribe discs have a larger "unprintable" radius at the center of the disc that other media. I found that when I scanned some of my discs and imported them directly into the LS Print program I was losing alot of information/text/pictures.
Essentially I need to take a point in the center of the circle and 'stretch' it outward in a circular pattern. (If you have seen Ace Venctura 2, think about when he had to escape from his mechanical rhino-spy vehicle through its bum I have also attached an image so you can see exactly what I mean. The read circle in the middle is approximately where the most inner edge of a LS disc can begin to print.
where to even begin as far as keywords go. I do realize that there will be a certain degree of 'smushage' (technical term) on my final product, but I would rather keep the original disc look than having to make my own custom disc for each game.
I'm sure this is mind-numbingly obvious and I am overlooking it, but when I go to use the rotate tool, the center point of the rotation is defaulting to the center of the artboard, not the selected group of objects. How do I change that to default to rotating on the selection center by default?
PS. This is Illustrator CC (17.0.2) on a Mac running 10.9, if that is relevant.
When I try to print and select "center" the image does not center on the page. CS5 worked fine originally but after the last update it too seems to have this issue. From what I can observe it seems as if someone thought that showing the printable area on a page was useful and somehow that may have been worked into the calculation of what centered (on the long dimension of a print) is. Engineering aside, if you actually try to sell your work, your client / customer only sees that the image is not centered on the physical sheet. They don't care about the printable area. The only work around I have found is to uncheck "center" and key in 50% of the difference between the actual print size and the actual paper size as a margin. I don't want to scale prints. I need to print to specific dimensions.
For reference I am using a PC running Windows 7 and an Epson 4900 printer
I have wanted to know how to create things like circle gradients from the exact center of the canvas.
I know how to create a gradient, but the problem is, it's really hard to pin point exactly where the center of the canvas is, and sometimes I need it to be as perfect as possible.
I'm laying out cribbage board designs for export to .dxf. I've drawn the board holes as circles but for the dxf file what I really need is a Single Point at the center of each circle.
So, is it possible to make single points in CorelDraw X4? If so, is there a way I can put a single point in the center of 300 holes at once?
I'm new to Illustrator and perhaps it's not the best software of CS6 Master for doing this, but:
I have a few (13) circles, they are connected with lines (one line from the centre of a circle to the centre of the next one, so 13 connecting lines). I need to move the circles around in order to create the appearance that suits me best, but I want the connecting ending to move together (see picture below). I need to do this often and get an immediate visual feedback. How do I do it? Am I using the wrong software altogether?
i work with multiple screens. 1 is my main screen (laptop), 2 is a side monitor (much bigger than laptop) and wireless keyboard. i work on autocad 2012 on screen 2. i've recently switched screen 2 as being the main screen (start button, etc). now, a bunch of my pop-up windows disappear and i can't find them unless i change my display screen back to screen 1. is there a way to make sure that all of the pop-up windows show up on the working screen (or screen 2), or the screen where the autocad software is displayed?
View 3 Replies View RelatedOn the top of my Autocad display there is a "communication center" icon. So there is a constant connection with internet.
How can i shut down this connection ?
when i pick design center from the ribbon nothing happens. Even if i type in adcenter nothing happens.
View 2 Replies View Relatedhow to I get my center point to show up as a dot as it did in inventor 2010 so I can use it as a point to constrain sketches to?
View 7 Replies View RelatedPlotting to layout (as opposed to extents or window) is infuriating. I cannot get my drawing to center properly within the printable area, and I can find no consistency on how AutoCAD is offsetting my drawing. My titleblock is drawn with a trim line of 22x34". I choose the ANSI D sheet size which is 22x34" and when I preview the plot the bottom left corner is offset from the bottom left corner of the printable area by .25, .25.
If I delete the 22x34 trim line from my titbleblock and replace it with a simple point at the 0, 0 bottom left corner, then when I check the layout and printable area, the point shows up offset from the bottom left corner of the printable area by .0006, .0016. Why is it any different than when a line was drawn? If I delete the point the offset from the bottom left corner of the printable area to the closest drawn element then becomes .0013, .0012.
This is absolutely ridiculous. I want to batch plot and I want to have proper margins, but it seems nothing renders consistently and I am stuck with ill-formatted plots. I would love to batch plot to extents, but as I go through the setup, that is not an option for me, so I appear to be stuck with the layout, which I have never gotten to work properly since it was introduced. What is the trick to make it work?
I am just printing to Adobe PDF with the Acrobat printer.
I am wondering if there is a way for the images of blocks in the Design Center viewing window to be bigger. Its hard to see what all is in the block.
View 2 Replies View RelatedI'm not able to open to inventor 2010 content center in user login but where as in i'm able to open inventor 2010 content center in administrator account.
View 9 Replies View RelatedWhen inserting a jpeg into a drawing is it possible to insert it via it's center point? I am inserting utillity drawings on to an OS background and if i could insert via the center point it would save me a lot of time.
View 3 Replies View Related