Photoshop :: Plot 3D Tube And Mark At It Center A Set Of Axis
Aug 24, 2012I got a photoshop CS5. I know it can plot 3-D pictures. But how?
I want to plot a 3-D tube and mark at it center a set of axis.
ADVERTISEMENT
AutoCAD 2010 :: Keep Center Mark At Center Of Circle Or Arc?
Apr 23, 2012How to keep the “center mark” at the center of the circle or arc?
I wanted to keep the “center mark” at the center of the circle but sounds not to work!
Is there a way? Or do we need to draw it using the “point” command?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD Inventor :: Publishing Tube To Content Center
Jun 27, 2013I have published a "custom" tube size to content center, but I am curious if there is a way for the tube size to be added to the existing library?? (not sure how to explain) Frame Generator has 4x3x5/16 and I would like 4x3x3/8 , in the ANSI AISC HSS(Rectangular) Library. Do I have to actually create a custom part and publish or is there a way to add this tube size to the library, nothing is changing except one parameter, which is thickness...
I just realized I pointed to the wrong library, it is the one directly above the red box - ANIS AISC (Rectangular) not the HSS one.
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
3ds Max Modeling :: Produce A Fillet Between Each Tube To Center Hex Object?
Jan 8, 2014I have a simple object that I need to produce a fillet between each tube to the center Hex object. How is this done? I tried selecting the edge of the tube that is adjacent to the hex but there is no option to "fillet" the selected edge.
Max 2013 64bit
AutoCad :: Center Mark For Several Circles At Once
Jun 1, 2009Is it possible to put a center mark on multiple circles instead of one at a time?
View 9 Replies View RelatedAutoCad :: How To Increase Size Of Center Mark
Aug 15, 2013Be there a way to increase the length of the lines in the center mark so that they do go out to at least the diameter of the circle, so that these lines can be used to trim parts of the circle?
View 4 Replies View RelatedAutoCAD Inventor :: Add New Member To ANSI Rectangular Tube Family In Content Center?
Nov 17, 2011I need to add a new member to the ANSI Rectangular tube family in the content center. The problem is I don't know what the Ix and Iy columns are. Both columns have a sub title of [inch^4]. What these variables represent? I inserted a part from the family in an assembly and checked the paramerers window and these aren't listed in the parameters.
View 2 Replies View RelatedAutoCAD 2010 :: Option To Show Center Mark Of A Circle?
Apr 21, 2011Is there an option to show center mark of a circle?
View 6 Replies View RelatedAutoCAD Inventor :: How To Add Axis And Plane Thought Center Points
Jun 20, 2007Attached are two parts and an iFeature that I keep in the "Punch" folder and use as a punch. It is common that clearance holes need to turn into slots and vice versa. The centerpoint is the perfect locator for both. The problem is I have not found a good way to place an iFeature slot on a centerpoint as easy as I do an iPunch. This means I have to convert the part to sheet metal and then back again.
Is there an easy way to place a slot, or a similar slot like this with an iFeature? ie as easy as the Hole Feature or iPunch Feature?
The other thing I do is add an axis and plane thought the center points to aid in constraining. If I remember correctly it was not possible to include work geometry in an iFeature (at least with version 10)
AutoCad 2D :: Create A Circle From Two Given Tangents And Center-line Axis?
Mar 27, 2013Is it possible to create a circle from two given tangents and a center-line axis? For example, can this RED circle be derived in AutoCAD?
tan_tan_centerline.PNG
AutoCAD Inventor :: Automatically Project X-axis / Z-axis Or Z-axis Onto Sketch Plane?
Aug 25, 2010Is it possible to automatically project the x-axis, z-axis or z-axis onto the sketch plane?
I.e. every time you open a new sketch the corresponding lateral and vertical axis will be projected onto the sketch.
AutoCAD Inventor :: Setting Up Point On Different Layer To Mark Center Point Of Circle?
Nov 15, 2012I need to find a way how to insert a point or a * on the center point of a hole and put it on a different layer. The reason for this is - I am a CAD tech for a welding shop and we cut parts out of steel and we use the dxf file format for our plasma table to cut parts. For example : if i have a 1 inch thick plate and want to put a 3/4'' hole in the plate the hole will be distorted because the hole is smaller than the material thickness. For these situation we can use the plasma table to burn a point or a dot on the center point of the hole. But to do this the point or dot must be on a different layer in the dxf.
View 2 Replies View RelatedAutoCAD Inventor :: Calculating Tube Length (not Tube And Piping)?
Mar 16, 2013I have a question about calculating the maximum tube length. Why do i ask this, because you can just measure it on drawing?
I'm building a parametric model for building simple storage tanks, and the goal is to get a complete BOM out of the model without any difficulties.
I have 4 possibilities of tube positioning on the tank. (see image)
1. A tube that stands in the center of the axis of the main tank.
2. A tube that stands in the center of the axis of the main tank, but under an angle
3. A tube that doesn't stand in the center of the axis of the main tank.
4. A tube that doesn't stand in the center of the axis of the main tank, but under an angle
These 4 possibilities can be flush with the inside of the tank or not.
Is there a easy way to determinate the longest point from the front of the tube? This longest measurement will be the length i need to get into my description for the BOM.
AutoCAD Inventor :: Repair Tube Constraints In Tube And Pipe?
May 27, 2013How do I repair a tubing constraint?
I use tubing in inventor, I always attached tube to whatever fittings I am using and everything is fine but if something gets moved that the end of the tube loses its contraint I'm ready to jump off a cliff!
Is there any way to get the end of the 3D sketch contrained to the fitting again?
Up until now I have always had to deleted the route and started over. Inventor Pro 2014
AutoCAD Inventor :: Tube Frame With Tube Connectors?
Oct 10, 2013I want to build a pipe or tube frame and use tube or pipe connectors to join the pipes.
What is the best way? "Tube and pipe" or "Frame generator"?
AutoCAD Print / Plot :: Center Printing Command
Apr 24, 2012When batch plotting using an external plot utility from Model Space, I get pages with different placements on the paper, the issue appears to be that some sheets are selected for Center the Plot and some are not. Even though my plot utility has a selection for Center Plot, it won't override what is already in the page for this one option. Is there a line command I can run in a script that would allow me to set the plot to center without having to open each sheet and reset this manually?
View 3 Replies View RelatedAutoCAD Inventor :: Attach Axis System To Cylinder Axis
Mar 25, 2013i try to make an animation. I create a cylinder and i want to rotate it by longitudinal axis. i click 'components', select the cylinder and after i click 'position' to select the axis that axis system appears in the right side of the cylinder not in the middle. If i continue whit this settings the cylinder will rotate by a circle not by his longitudinal axis. How can i move that axis sistem in the middle of the cylinder? I can drag it but can't place it exactly in the middle.
View 1 Replies View Related3ds Max Animation :: How To Lock Z Axis Of Object With Upper Arms Z Axis
Jan 25, 2013I'm rigging a shoulder pad to a biped and I'd like it to only rotate on one axis. Google hasn't been that useful, and I hope I don't need scripting for this kind of minor thing. I'm rather new to 3Ds Max Design but I'm learning fast and liking it so far!
I've attached what I want to effectively accomplish. I'm looking for a way to lock the z-axis of the object with the upper arm's z-axis.
EDIT: Reduced picture size.
AutoCad :: Extract Rotation Of Block Relative To Yz Axis And Xy Axis
Oct 7, 2013Is there any way I can extract the rotation of a block relative to the yz axis and xy axis. I can extract the insertion point and xy rotation but not the yz and xz.
View 9 Replies View RelatedAutoCAD Print / Plot :: Change Plot Setup To Multiple Sheets For Use With Batch Plot
May 21, 2013I have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
Photoshop :: Center Print In CS6 Does Not Center On Physical Page
Dec 10, 2012When I try to print and select "center" the image does not center on the page. CS5 worked fine originally but after the last update it too seems to have this issue. From what I can observe it seems as if someone thought that showing the printable area on a page was useful and somehow that may have been worked into the calculation of what centered (on the long dimension of a print) is. Engineering aside, if you actually try to sell your work, your client / customer only sees that the image is not centered on the physical sheet. They don't care about the printable area. The only work around I have found is to uncheck "center" and key in 50% of the difference between the actual print size and the actual paper size as a margin. I don't want to scale prints. I need to print to specific dimensions.
For reference I am using a PC running Windows 7 and an Epson 4900 printer
Photoshop :: Show The Center Of Canvas (or Snap To Center)
Oct 26, 2007I have wanted to know how to create things like circle gradients from the exact center of the canvas.
I know how to create a gradient, but the problem is, it's really hard to pin point exactly where the center of the canvas is, and sometimes I need it to be as perfect as possible.
Illustrator :: Default Rotate To Object Group Center Not Artboard Center
Nov 27, 2013I'm sure this is mind-numbingly obvious and I am overlooking it, but when I go to use the rotate tool, the center point of the rotation is defaulting to the center of the artboard, not the selected group of objects. How do I change that to default to rotating on the selection center by default?
PS. This is Illustrator CC (17.0.2) on a Mac running 10.9, if that is relevant.
AutoCAD Inventor :: Put Default Orbit Center To Center Of Screen?
Aug 22, 2013I'm having some fits with the constrained orbit center. It seems to me that It used to always be in the center of the screen when I would use Shift and CMB. Now it seems to be stuck on the center of my assembly/part. I know that I can hit F4 and long select LMB to re-center but I have never had to do that before the last day or two. I have uninstalled all the Beta Add ins I had installed and I have even uninstalled and reinstalled Inventor Pro 2014.
Is there an option somewhere that puts the default Orbit Center to the center of the screen?
AutoCAD Print / Plot :: Mac Doesn't Allow For Proper Printing On Their Plot Style Setting
Aug 29, 2013I am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting.
I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?
AutoCAD Visual LISP / AutoLISP :: Plot Transparency Option In PLOT Dialog Box
Sep 11, 2012Where else do they keep this setting? I only have found it in Active Layout in extended dada
(entget (vlax-vla-object->ename(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object)))) '("*"))
The last pice of extended data is:
("PLOTTRANSPARENCY" (1071 . 0))
When i change it to 1
(setq layout(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object))))
(vla-getXdata layout "PLOTTRANSPARENCY" 'type 'data)
(vlax-safearray-fill data '("PLOTTRANSPARENCY" 1))
(vla-setXdata layout type data)
it stays there (extended data), but the setting in Plot dialog box doesn't change!!! And it still prints no transparency.
It takes to save the drawing and reopen it again to see the change.
The command -PLOT does not have this setting as well, so my options back to VBA or Lisp, but HOW?
AutoCAD 2010 :: Plot Thin Lines And Dots When Plot Transparency Option Is On
Feb 6, 2012I have a problem to plot thin lines and dots when Plot Transparency option is On in the Plot dialog box.
The lineweight is a half of the original. I think i have tried everything.
It shows correctly in the Plot Preview but when printed there are no dotted hatches and lines are much thinner.
AutoCAD Print / Plot :: Sharing Plot Files 64bit With 32bit Machine?
Aug 21, 2012Can users with a 64 bit computer share pc3's and pmp's with 32 bit users without adverse effects?
View 1 Replies View RelatedAutoCAD Print / Plot :: Publish To DWFx Plot Stamp Layer
Aug 29, 2011When I publish a drawing as a multipage DWFx (or PDF for that matter) with "Include Layer Information" selected, the Plot Stamp (Simple Date/Time and Text) comes out but on different layers on different layouts.
Example:
First Layout : Plotstamp resides on Layer 0
Second Layout: Plotstamp resides on Layer 3P
Third Layout: EQPT-VC
etc
Some general information:
Autodesk AutoCAD 2011 64bit
Autodesk DesignReview - 2012
Adobe Acrobat X Professional
Layer 0 Is thawed/plotable and on in all layouts, viewports all layers, viewports. It has at least one entity per layout
Is there anyway to rectify this and still use the built-in Plot Stamp?
AutoCAD Print / Plot :: 2007 Not Reading Plot Styles Correctly
Jan 17, 2012So the firm I work at has AutoCAD 2000 and 2007. 2000 is installed on 5 out of the 7 computers, and 2007 installed on 6 of the 7 computers. 2 of the computers running just ACAD 2007 are Windows Vista, while all the other computers are Windows XP. We have an OCE TDS320 CAD Printer, an HP Wide Format Printer and a Panasonic 330 Copier/Fax/Printer. Our Problem is that When you try to plot an ACAD2007 drawing it will only plot it in color. This problem did not exist before 1/12/12.
When I select the Plot Style to print I select "monochrome.stb" which has always worked, now all of a sudden it doesnt. The only way i have found to fix this problem is to change my drawing to layer "0" which is white, so when it tries to print in color it will print black. Another Guy in the firm i work at has ACAD2007 on his computer running XP, he also has 2000 running on the same computer. When he tries to plot on ACAD2007 the same thing happens, so it is not isolated to my computer.
There is a difference though between his Plot Styles on his computer and the ones on mine. His end with .ctb, which works. It only doesnt work when he tries to print a drawing i made off of my computer. Because of this we copied his Plot Style folder for AutoCAD 2007 and installed it into the folder with all of my plot styles on my computer, replacing the ".stb" with ".ctb" That did not work at all. The last thing we tried was to copy over a file that plotted correctly, delete the drawing and draw what we needed, This also did not work. So basically we are thinking that ACAD2007 is not reading the Plot Styles correctly, or the Plot Styles are wrong or currupt.
AutoCAD Print / Plot :: Plot Results From Paperspace Are Different From Model Space?
Jan 17, 2013I have several objects on various layers in model space and they are exposed through a viewport in a paperspace layout. I also have a corporate CTB plot style.
Here is my problem: If i plot the objects from model space, they all plot with the correct lineweights as defined in our corporate CTB, but when i plot them from the paperspace layout, some but not all objects plot with a heavier lineweight than what is defined in the CTB.
I thought the CTB was supposed to override any settings applied to individual objects, but more importantly, why the different results, on the same objects, depending upon the space from which they're plotted?