AutoCAD Inventor :: Publishing Tube To Content Center

Jun 27, 2013

I have published a "custom" tube size to content center, but I am curious if there is a way for the tube size to be added to the existing library?? (not sure how to explain) Frame Generator has 4x3x5/16 and I would like 4x3x3/8 , in the ANSI AISC HSS(Rectangular) Library. Do I have to actually create a custom part and publish or is there a way to add this tube size to the library, nothing is changing except one parameter, which is thickness...

I just realized I pointed to the wrong library, it is the one directly above the red box - ANIS AISC (Rectangular) not the HSS one.

Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49

View 1 Replies


ADVERTISEMENT

AutoCAD Inventor :: Publishing To Content Center

Jul 24, 2013

I just created an empty Fastenal Library, and it is set to Read/Write.  We order most of our fasteners from them, but not much else, so I used "Copy Category Structure To" Fastenal.  I created a plain washer to add to the library, but when I try to publish it, I can't get it to work.

 When I "Publish Part," I select Fastenal and English, then am asked to select a category to publish to.  The Washers folder is greyed out, along with most other folders, but the Ball sub folder is not.  I can't select Plain, which is what I need, but I can select Ball.

Also, is there a way to delete sub folders?  I right click on Pins or Rivets, and the option to Delete Category is greyed out.

View 1 Replies View Related

AutoCAD Inventor :: Publishing To Content Center

Jun 18, 2013

Is it possible to publish an assembly to the content center?

Dell Precision T3500
Intel(R) Xeon(R) CPU W3530 @2.8GHz
ATI FIrePRo V5800 (FireGL V)
12 GB Ram
64 BIt OS

View 9 Replies View Related

AutoCAD Inventor :: Custom Content Center 2014 Publishing Error

Sep 28, 2013

I'm using Inventor 2014 with Service Pack 1 with Desktop Content Center enabled on a single machine.  I've also installed Vault Basic 2014 on the same machine. Operating System is Windows 7 Professional.

I've edited my non-vaulted and vaulted project files to create a Custom Content Center Library called Zzyzx.  I've started a new Assembly and entered the Content Center Editor to add files to the Zzyzx library.  I've copied the Inventor ANSI fasteners section into the Zzyzx library, using the Copy To method with links enabled.  So far, so good. 

After copying the entire Inventor ANSI fasteners to the Zzyzx library, I created a new column called DESCRIPTION within the Heavy Hex Head Bolt - Inch series folder.  Using and expression, I've modified the string values of the just created DESCRIPTION column.  I've elected to map DESCRIPTION to the Project.Description iProperty.  I use the OK button and each row in the new column gets populated.  Update Lightning Bolts are displayed at the far left of the dialog box. 

I then use either the Apply or OK button and then Inventor displays a Publish Error message box that states: Non-unique filename(s) found in members.  I've checked the file names and I see nothing that's repeating.  I've tried using a new file name, but that doesn't solve the issue.What steps must I take in order to successfully edit my Custom Content Library called Zzyzx?

Inventor 2012 Certified Associate
AutoCAD 2012 Certified Associate

Product Design Suite Ultimate 2012, 2013 & 2014...Other than THAT, Mrs. Lincoln, how was the play? Where we send more Govenors to prison, than on to retirement!

View 1 Replies View Related

AutoCAD Inventor :: Publishing Custom Nut To Content Center For Use With Bolted Connections

Sep 12, 2013

I'm making a customized content center library for my company and I'm trying to add a special type of nut but I'm not having any luck. I finally figured out how to author a part and have it show up in the bolted connection tool. Now I'm just getting an error as soon as I select my custom nut.

The error is "Cannot initialize part data table. Please verify the table definition in Content Center editor."

I've attached my part. It's a simple nut for use in aluminum extrusion, the only thing that changes between sizes is the threaded hole.

View 7 Replies View Related

AutoCAD Inventor :: Publishing Or Editing Content Center Crashes 2014

Jun 12, 2013

Publishing parts to C Center or Editing tables in C Center Crashes Inventor Prof 2014

Before i say anything let me say that this problem occured last night.Was always there as i had not used the feature before in 2014. I uninstalled ONLY Inventor from the suite and re installed. It worked !!

Tonight i was publishing new parts and then Inventor crashed. Since its crashed again i cant publish or edit part family tables to make additions etc with Inventor crashing.

I believe something has corrupted again within the Inventor 2014 install and i dont know what.

Im looking for some pointers as i dont really feel like uninstalling and reinstalling Inventor to fix it.

I have cleared the cache from users folders etc. Im guessing i need to clear some thing else as well. This crashes in both Vault and local CC files.

View 3 Replies View Related

AutoCAD Inventor :: Add New Member To ANSI Rectangular Tube Family In Content Center?

Nov 17, 2011

I need to add a new member to the ANSI Rectangular tube family in the content center. The problem is I don't know what the Ix and Iy columns are. Both columns have a sub title of [inch^4]. What these variables represent? I inserted a part from the family in an assembly and checked the paramerers window and these aren't listed in the parameters.

View 2 Replies View Related

AutoCAD Inventor :: Content Center Filter Voids All Content When Engaged

Nov 20, 2011

Somehow the Content Center Filter clears all content while in ISO or DIN. Both libraries are turned on in project.

I can see only one custom library when either filter engaged. I also see both ISO and DIN parts when filter is off.

[URL] ........

View 4 Replies View Related

AutoCAD Inventor :: Publishing Custom Parts Into Content Centre / Frame Generator

Aug 21, 2012

I am trying to create/publish custom shapes into Content Centre and for use in Frame Generator. I can create the i-Part and configure the parameters I want to enable different sizes - no problem. However when I go to "Publish Part" ()

I get the following error.......

do I need to save the ipt file in a different location? What dependencies are there? I get the same result if I follow the Inventor tutorial using the brace.ipt part....

View 2 Replies View Related

AutoCAD Inventor :: BSI Content Center

Jun 1, 2012

I used to use the BSI content fine in my old version of Inventor, but on this years version there appears to be no BSI content.  I have tried reinstalling the content center and all of the options are selected but still no BSI?

View 2 Replies View Related

AutoCAD Inventor :: Can't Log Into Content Center

Nov 18, 2011

I can log into data managment services outside of inventor.

I can't log into content center or access frame generator from inventor.

INV 2009

View 1 Replies View Related

AutoCAD Inventor :: How To Use Content Center

Jun 22, 2012

I'm using a student version of inventor 2013, and i'm trying using the content center for add bolts at my project, but all the components are unable for my use, because everything are marked as read only.

How can i do for use these components? and other question, how can i create account at vault?

View 6 Replies View Related

AutoCAD Inventor :: Content Center Characters

Oct 13, 2012

We have an extensive library of parts that we consistently utilize, but we do use Content Center for hardware and routed systems components.

All of our library parts have our company ERP's item number in the stock number iProperty, and the ERP's description in the Comments iProperty.

For CC items, we have added columns for these and mapped them to the appropriate iProperty.

Everything works great except for one thing.

Many of our ERP descriptions inlude inch marks, foot marks, and the & symbol.  For our normal library parts thhis is not an issue.  However, CC items utilize these characters differently.  The result is our descriptions come out different that what is entered.

See the example below...

How to include these characters in the CC descriptions?

Inventor 2012 SP3 ~ Vault Pro 2013
==================
Lenovo D20 Workstation Intel Xenon E5640@2.67GHz (2)
Win 7, 24gb RAM, NVIDIA Quadro FX 3800

View 8 Replies View Related

AutoCAD Inventor :: Content Center Sharing

Jun 22, 2012

At my company we currently have a huge number of Autocad deployments for 2010,2011,2012.  Right now our deployments weren't setup to include the content centers.  I have installed 2012 Inventor on my personal computer as a trial version to grab the .idcl files.  I was wondering if I would be able to just drag and drop these onto a server and have my co-workers point to the file location within inventor itself via options>content center>etc.  

View 6 Replies View Related

AutoCAD Inventor :: Content Center Not Visible

Nov 29, 2011

Two computers with Inventor Pro 2011 on them, same set up in Apllication Options/Content Center and Apllication Options/File. On one Inventor sees Content Center on the other does not. What could be the problem? 

View 2 Replies View Related

AutoCAD Inventor :: Content Center Is Empty

Jun 24, 2013

Installed 2014 recently, and now my Content Center has nothing in it. The "Place from Content Center" window loads, and there are no folders.  My item count is 0.  I've attached a screen shot for reference. Clicking the refresh button does nothing.

We have no custum hardware/materials/etc.

If I try to update the content center library (step 2), the Configure Libraries is full of "Not Available"s. Again, I've attached a screen shot.  I'm nervous to continue migrating with out all that info.

There are two pc's with IV, and the content center is working fine on the other pc.  The CC is a local thing, and only my computer seems to be upset.

View 4 Replies View Related

AutoCAD Inventor :: Customized Content Center

Mar 24, 2012

I want to make a customized channel with all the dimesnions fixed - except A and G (variables). See attached screen shot.

View 1 Replies View Related

AutoCAD Inventor :: Content Center Customization

Feb 9, 2012

I have been working on creating custom content center families that will populate our company's part numbers and descriptions into the browser and drawing BOM.  I have been quite successful in this except with the material.  I've created custom materials for the fasteners that have the specified strengths and finishes per the fastener.  By doing this I've created a different problem.

How can I create a custom property that will insert a specified value for material into the BOM?  I've tried to change the link for Project.Material and then the part inserts as Inventor's default.  I don't think creating individual material styles for each fastener is a viable one since I'll end up with duplicate style names.

IV 2012
Running on:
Windows 7 64 bit
12 GB Ram
Intel Xeon processer

View 3 Replies View Related

AutoCAD Inventor :: Content Center Printout

Aug 6, 2013

Where I can get a pdf of the standard Content Center Library? Just a list of all the parts and sizes along with nomenclature.

Dell XPS 8300
Intel(R) Core(TM) i7-2600 CPU@3.40GHz
16GB RAM
Win 8.1 Pro
Autodesk Product Design Suite 2014

View 4 Replies View Related

AutoCAD Inventor :: Content Center Link

Oct 5, 2012

I am using content center for fasteners I want for my assembly.However, when I close the assembly drawing and try to reopen it, the link has been lost between the assembly and the fasteners and I am unable to find them.

I have created a project file before I start the assignment thinking this will solve the linkage problem but no luck.

View 3 Replies View Related

AutoCAD Inventor :: Content Center Materials

Mar 11, 2011

I'm trying to create a custom Content Center bolt that can be one of three different materials (6.8, 8.8, 10.9).  The materials are stored in our Styles Library, and the project specifies "Use Styles Library = Yes"; so the three materials are visible from the Content Center Editor.  The Material column in the Content Center Editor is defined to "Map To Inventor Property: Project.Material".  Everything looks fine.  But no matter what material I select, I get 6.8.

I've already got LOTS of parts published with custom materials and they all work fine, but the big difference is that these families are all the SAME material.  I'm having problems with getting a family to use DIFFERENT materials. We're using Inventor 2009.

View 6 Replies View Related

AutoCAD Inventor :: Bar Channels In Content Center

Mar 26, 2013

I'm looking for a 2" x 1" x 3/16" bar channel in the Content Center but I cannot find anything smaller than 3" x 1.41" x 0.17". I've been looking under Structural Shapes > Channels. Am I missing content from the Content Center? Or does this just not exist in the Content Center?

View 6 Replies View Related

AutoCAD Inventor :: Content Center Reference

Feb 2, 2013

I'm very new to Autodesk Inventor 2013.I'm working on a small project on my laptop at school. Recently I tried to work on this project at home. So I put everything on a Memory Stick, plugged it in at home and opened the file as usual. The problem is that the file needs references to the content center parts like screws etc. and can't find them. I was looking through my whole computer for this content center files Inventor is asking me, but I can't find them.

If I open a new project and open the content center it works without problems. The problem is just that I can't tell Inventor where the parts are to which it needs to be referenced.

View 3 Replies View Related

AutoCAD Inventor :: Content Center Parts In BOM

Mar 9, 2012

I am just starting to make assembly parts from the content center and have found that for the most it is useful. Unfortunately I have found that when these parts are placed in the assembly and a drawing is make of the assembly the bill of material lists total inches of a structural member rather than quantity of piece parts in the quantity column. Thus a 10"  tube shows a QTY. of 100 in. rather than 10 piece parts. I have removed the check to export B_L in the function menu but that does not solve my problem. Is there a way to get this to read quantity of piece parts and not total length of material used?

Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium

View 1 Replies View Related

AutoCAD Inventor :: Content Center Empty

Apr 18, 2013

We have upgraded from Inventor 2012 to 2013 in August and my company never uses the Content Center, but I need it now and when I opened it up, the center is empty. I need bolt and washers and its empty. I tried linking the libraries folder to the Content Center link but nothing.

View 8 Replies View Related

AutoCAD Inventor :: Cannot See Content Center 2013

Oct 30, 2012

I have re-installed the content center. we do not use the vault even though i had to install the basic to install the content center see attached for my file settings for the content center.

View 9 Replies View Related

AutoCAD Inventor :: Set Up Custom Content Center?

Feb 2, 2012

I've never set up a custom content center before and I've done some research on the forums but I could really find the information I was looking for.  My goal is to change the stock number and description to our company standard.  Right now I edit it with the bom editor which is a bit time consuming.  Another goal i would like would be that the part number is always the file name.

-Autodesk Inventor Professional 2010

View 5 Replies View Related

AutoCAD Inventor :: Customized Content Center

Aug 2, 2012

I'm working on creating a customized content center for my company. I am having a problem with one of the CC parts. My process of operation is as follows. Change project file to default. Make sure Library View is on Merged View. Then I select the part that I need. RC copy to our project file. Revise the Part Numbers to match our part numbers then ok. Go to place in an assembly drawing and as soon as you click on the part Inventor crashes. It seems to be only on particular part. All of the other items I have place (over 50 or more) into our customized content center work fine, but not this one.

It seems that whenever I set a key column to be "Part Number" it crashes. If I have any other key columns selected (minus part number column) it works fine. I've also tried creating my own column that says part number and when that one is selected it still crashes. The part that I am having an issue with is the Slotted Hex Head Machine Screw - Inch.  Also we are still running 2010 with service pack 4 I do believe. 

View 9 Replies View Related

AutoCAD Inventor :: Content Center Files

Feb 22, 2012

Why can't Autodesk be more consistent? I'm trying to use Part Number in my Description Field in Family Table.

I.e.. Hex head bolt : DIN 931-1 - M6 x 60

Countersunk bolt : M4  x  20 DIN 7991

Why the switch???

View 2 Replies View Related

AutoCAD Inventor :: Deleting From Content Center

Aug 21, 2012

Once you publish an item to the content center if you want to remove it how is this done?

View 4 Replies View Related

AutoCAD Inventor :: How To Activate Content Center

Jul 12, 2013

I want to insert a conical slot in a part file, or a part in an assembly which i edit in place.

I was told to activate content center, but how?

I don't find the button.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved