Photoshop :: How To Batch Watermark Logo Onto Varying Heights
Jul 20, 2012
I would like to watermark a logo on a batch folder of photos, but the photos are different heights (but same width). If I use text in Photoshop it's not a problem, but if I use my logo the Action places it in different positions depending on the height of the photo.
What I am looking for is a way to have the logo placed in a relative position to the bottom right corner of the photo. Say, 25px from the bottom and 0px from the right. I am unsure of how to achieve this relative placement.
View 51 Replies
ADVERTISEMENT
Jun 24, 2008
I've shot 4 series of Pianno recitals, which amounts to about 160 final photos. These photos will be going to a website from where clients can order prints at various sizes. Most of the clients will be ordering 5x7, but there could be some that are bigger (8x10, 8.5x11,etc). All photos will need to be uploaded to this site at their maximum resolution to accomodate the largest prints - it does not support a feature to upload the same photo in multiple sizes for different print options. All photos will need to have my custom watermark/logo with my signature and the event name and date - this would be just a simple text with shadow in the bottom right corner of the photo.
In the past, I only needed to support 5x7 prints which made my job easy. I simply cropped all photos to 5x7 ratio and resized to 300DPI, I ended up with 2100x1500 pixels. I then created a layer with the logo and used the batch tool to automate the addition of the logo layer to each photo. The position and size of the logo layer always ended up in the exact same spot, since all photos were exactly the same size.
For my new assignment, I will need to leave the photos at their original maximum resolution to support large prints. I'm strugling now trying to figure out how to automate the addition of my watermark/logo layer so that it appears in the same position and size on all photos. Is there any way how I can automatically resize the logo layer to match each photo's size. That way if I have an image that was heavily cropped to isolate the subject into lets say 1400x1000pixels and another that is lets say 2800x2000 pixels, my logo would proportionally scale up or down to maintain its relative size and position to the background image.
View 6 Replies
View Related
Oct 23, 2013
Any way using autoCAD LT 2014 to get CAD to display the elevation heights of survey points without having to type the heights in text bozes next to each individual point. i can insert a field which displays the elevation of the point but doing this again i would have to do every point individually.
Another words is there a way to select all the survey points required and get CAD to display a certain property, which in my case is the elevation height of that survey point, next to it? so it looks like x 23.35 x 23.57 etc..
View 9 Replies
View Related
Mar 13, 2006
Last night I created a quick little logo to watermark some pictures with; however, after alot of trying I have been unsuccessful at creating a scalable path around everything in such a way that it doesn't blur the edges. I am trying to do what is found at the link below so that I can later automate the process of inserting the watermarks:
The logo design (see below) is made from a capital letter 'D' and a lower case letter 'm' sharing vertical starting strokes with another font. I am thinking that since the two letters ('D' and 'm') are no longer text that this may not be do able. I couldn't figure out how to delete part of the 'D' and 'm' but still make it possible to 'Create Work Path'. I hope I explained this correctly...I am pretty new to photoshop. Is it possible to take what I have (the .psd version doesn't have the white background) and use it to do what they did on the link?
View 7 Replies
View Related
Feb 15, 2008
I need to place a semi-transparent logo onto about 300 images so people do not take my pictures right off the web and use it as their own. Instead of doing them one at a time, is there a batch method to crank these out? All the images are the same size and I have them in both PSD and Jpeg format.
View 2 Replies
View Related
Aug 15, 2006
I'm looking to create a batch that will allow me to resize an image (I can do this part) and then put a watermark (watermark.psd) on top of it. I have followed several tutorials and tried the actions and know how to batch, etc...but when I try to put an image over it, it errors. I have just been starting the recording and then drag and dropping from watermark.psd to the file I'm working with. That causes an error.
View 9 Replies
View Related
May 2, 2013
I'm trying add a watermark to approx. 8,000 images by batching the process. However, it only does about 400. The 2 errors that are logged are:
Could not complete your request because of a program error. (-1)
Could not complete the command because the selected area is empty. (-25570)
Here's a screenshot of the action that I'm using:[URL]...
View 12 Replies
View Related
Nov 15, 2013
I know how to batch process images to place a logo or watermark on an image. Normally the image is different every time and the exact same logo is placed on all the images.
In this case the image is exactly the same every time but i need it saved in a folder 100 times each with a different logo. So essentially a reverse of the normal process. Same image different logo's.
View 2 Replies
View Related
Mar 9, 2013
Why cant I export some files with my watermark logo? works for some photos but not others!
View 1 Replies
View Related
Nov 4, 2012
I would like to resize and watermark all of the image in a particular file. I understand that I can do this with Lightroom, but I do now know how.
View 1 Replies
View Related
Apr 1, 2008
This should be simple but I cannot figure it out. I am trying to process large batches of photos with varying pixel counts, but they will all be printed at the same size in inches. I want a constant height text watermark on all of them, but since Photoshop only allows you to specify text height in "pixels," my watermarks end up at different relative sizes on each picture.
For simplicity, just consider 2 different pictures. One is 1700x2200 and the other is 2125x2750. I want to print each one at 8.5x11 with a 1/2" high watermark, via the same batch operation. Whatever pixel height I specify for the text in my watermark, it will be a different size in inches on each photo.
Is there any way to do this WITHOUT re-sampling the files as part of my batch operation? I don't like re-sampling when it's not necessary.
View 10 Replies
View Related
Mar 8, 2011
I can make an even gradient between two straight lines, with a fair amount of precision. as shown in the first two jpegs
How I can do this between two curvy lines so the gradient adjusts to the changing thicknesses? In the second two jpegs I'm fudging the effect with the brush tool. But this is not precise enough for what I'm trying to do.
I want to use this for traditional animation drawn frame by frame. So if I went in with the brush tool in each frame, the gradient would be stroking and freaking out when you watch the animation.
View 6 Replies
View Related
May 20, 2009
I'm using actions through CS4 and have a large volume of TIFFs of varying sizes and dpi that I need to resize to the same dpi and longest length. I've set up the one action to resize both landscape and portrait images in one go to a standard longest length setting through the fit image automate function but this doesn't change the dpi of the files which range from 300 - 2400 dpi.
View 1 Replies
View Related
Nov 28, 2008
I originally put this with a post on saving for web but I think this is a bit different.
If I shoot a big painting, the resolution of detail - brushstrokes, canvas, imperfections adds to the overall feel of the image. If I shoot a tiny/small image with the same lens/camera and it fills the screen those details look like a relief map of the Himalayas! Can I get around that? I notice that sharpening can make a difference but what are the principles here?
View 1 Replies
View Related
Dec 16, 2005
i'm using PS CS and I want to fill a selection with a pattern but i'd like to simulate a light source.. so i'd like the pattern to fill with a varying density -- like stippling..or cross-hatching. i'm doing a 2-color (black and white only) t-shirt design so i can't have any gradations of colour. this may be a loaded question.. so i'm just hoping to get pointed in the right direction. if u need me to be more specific let me know.
Would illustrator be better suited for this task because i also have access to ai cs. even if not.. can someone recommend a good illustrator forum that is comparable to this mb? and maybe for Flash too.
View 3 Replies
View Related
Sep 25, 2007
i have a few hundreds images i need to watermark. The watermark i can do fine. but i have varying image widths.
I want the watermark to be centralised on the image. I also want to batch the process so i'm trying to work out if it's possible to centralise in an action.
View 3 Replies
View Related
Jan 23, 2012
I am using some drawings created by others in ACAD 14. I am using the existing font styles contained in the drawing which utilizes the Simplex font. However my text heights are different. My 1/8" font height is slightly larger than the 1/8" height contained in the drawing. When I use Properties to check the fonts it shows Simplex font and 1/8" height for both existing and new text, but mine is visibly larger. And it prints larger. I'm using LT'09. Win XP
View 3 Replies
View Related
Aug 25, 2013
I have for days now tried to export a 3d polyline from Autocad Map3d into ArcGis so that i may be able to view a height any where along the polyline. I just keep getting a height of zero.
View 4 Replies
View Related
Oct 23, 2013
way using autoCAD LT 2014 to get CAD to display the elevation heights of survey points without having to type the heights in text boxes next to each individual point. i can insert a field which displays the elevation of the point but doing this again i would have to do every point individually.
Other words is there a way to select all the survey points required and get CAD to display a certain property, which in my case is the elevation height of that survey point, next to it? so the survey points look like ---> x 23.35, x 23.57 etc..
View 6 Replies
View Related
Jul 19, 2011
Is there a way of displaying mounting heights of fixtures and fittings on elevation in revit architecture, like using a 300mm grid or something
View 1 Replies
View Related
Mar 15, 2012
Is it possible to move lines from different heights on the Z to "0"?
I am trying to use Architects drawings that have multiple line that look to intersect on looking from the top. but when you view them the front or side they are on different heights.
When I draw lines that don't start/end touching a line drawing by the Arch they are on the "0" height on the Z.
Not sure what they used to draw these original. Using Arch lines as reference to draw detail is not working very well, its taking way to Lang to do anything.
See Attached
Use the view to choose between front, top and Isometric.
View 5 Replies
View Related
Feb 17, 2012
I have a 3 story building. We are almost finished with design development. I need to raise the building's first floor which will cause all the other floors to change their level heights. I have been told that we need to fake in level markers because to change the level heights will cause all the information (for example dimensions) to disappear because they are 'tied' to the original level height. Is there a way to raise the building without loosing all the work that has been done?
View 9 Replies
View Related
Nov 22, 2012
In other words, I have three men (or little pigs or whatever )the same medium height, but I want to make one smaller and one larger than medium.
Is there a way to do that, for a newly proud that she can even move pixels now!?
View 8 Replies
View Related
Sep 1, 2013
Need to make a wall with varying height. For example, 3000mm at one end and 4000mm at the other. The result would be a sloped ceiling and roof. Should I make a 'mass' and attach a wall to it or is there a way to vary the height of an existing wall?
View 2 Replies
View Related
Jul 24, 2012
I'm in process of making a bulk of certificates to give to a group of people who participated in a contest. I have the design but I have to create over 200 different certificates (because they are personalized for every person). Each certificate should contain the name of the person to whom is adressed.
Obviously I could do it one by one but I'm looking for a quicker way to do it. I have the names database in txt format, sql format, xml format, whatever...
View 1 Replies
View Related
Apr 12, 2013
Is there a better way of achieving this (screen snip attached). To get the roof segments off lower plate heights I have added in temporary walls corresponding the higher plate height, picked by footprint then extended the overhang on these segments to hit the lower plate height. Then erase the temporary walls. But this detaches the edit footprint-edit overhang function.
Is there a better way? If only a line element would host a roof to enable slope and overhang association.
View 4 Replies
View Related
Dec 3, 2012
Would be interested in a strategy for a varying depth overlay, i.e. where the overlay assembly follows a centerline design profile rather than a pavement depth up from existing grade. Then the trick would be for the software to calculate the asphalt volume between the new top surface and the existing roadway surface.
View 8 Replies
View Related
Jul 26, 2013
I am trying to pattern a line within a profile and need the line to extend to the boundaries of this profile.
Also the boundary profile will be parameterised and the pattern needs to adapt to this.
See sketch below, what I am trying to achieve.
View 3 Replies
View Related
Feb 21, 2012
Is it possible to have varying column widths in Mtext? If so how?
View 8 Replies
View Related
Jun 10, 2008
when I browse image files I find that the Photoshop/Adobe logo has been replaced by the Netscape logo. When I attach a file in email the N-scape logo is there by file name/number not Photoshop logo. Anyone know why or have this issue?
View 5 Replies
View Related
Dec 13, 2013
Is there a way to force Inventor to dimension without snapping to various Z heights within a drawing view? I have basic top and side views created however when trying to dimension overall lengths and widths i'm snapping to high and/or low points of the model and getting screwed dimensions.
View 4 Replies
View Related
