In other words, I have three men (or little pigs or whatever )the same medium height, but I want to make one smaller and one larger than medium.
Is there a way to do that, for a newly proud that she can even move pixels now!?
I saw these images online and liked them and would like to make some parody Non-MMA Action Figures of my own, the problem is I can not figure out how the actual figures are made. I have been fooling around with images and Plastic Wrap Effect to no avail. I have actually done some research and think the figures may be made in a 3-D program like Poser, but not sure.
View 6 Replies View RelatedAny way using autoCAD LT 2014 to get CAD to display the elevation heights of survey points without having to type the heights in text bozes next to each individual point. i can insert a field which displays the elevation of the point but doing this again i would have to do every point individually.
Another words is there a way to select all the survey points required and get CAD to display a certain property, which in my case is the elevation height of that survey point, next to it? so it looks like x 23.35 x 23.57 etc..
How to make a human figure look like it has REAL depth.
If you have ever seen any of Ken Burns documentaries he uses a lot of pictures in his films from the past, but some of the figures or people in these stills appear in depth in such a way that they do not look flat.
Instead when the camera pans the picture they appear to be almost three dimensional inside the still. You can almost see in his stills there is a curvature to the outline of the figure. Their heads and bodies look as if they are inserted into the picture.
I have the removal of the background in the image down well enough but I don't know how to make the figure appear as if it is 3 dimensional in the new background. I wish I had a link to add here of his work as an example.
Is there a simple way of cutting a figures or items away from the backgrounds of one or more photos and and merging them into a paint net background image to make it look like the figures belong in the paint net image,not just superimposed or floating on the front of the image. I have been trying to create an image of my grandchildren together in one picture and not just stuck on, also trying to do this with animal images
View 7 Replies View RelatedI have a *.png picture with a file size of 5.8 MB a height of 39920 pixels and a width of 1020pixels.
When I try to drag& drop this picture from WinExplorer onto a X2 PSP installation then PSP tells me: "This is not a valid PNG file"
This *.png picture can be displayed without problems with other viewers. So its a problem of PSP.
How can I let PSP load successfully this picture?
I have a memory of 4Gb and running WIn7 pro 64bit. So hardware shouldn't be a problem too.
Basically I want to create a heightmap from a colormap (a game texture). Heightmaps are used by my shader to add additional detail to surfaces (see herefor a such a surface). This technique is called Relief Bump Mapping and produces pretty cool result if the shader gets a decent heightmap.
My problem is that I only have colormaps and want to create the heightmaps in Paint.Net. So far I simply played around with the contrast and and brightness of the picture, but the results are not perfect...
I uploaded some scaled down pictures which illustrate my problem a bit better:
This is my colormap texture:
If I am using my technique (changing contrasts and brightness) I don't get good results.
The red parts show the most problematic zones of the heightmaps. Since black means no height and white means height, these regions don't contain any height informations...I already thought about using a edgre filter, but the built in one doesn't seem to be very good.
I'm trying to make a layout for a site that requires the height in the file name.So I was wondering if paint.net had a function similar to this picture (photoshop) or is there any other way to measure height?
[URL]......
I am trying to create a script (that I can run on a batch of images) that will resize the images to a set width but will maintain the proper aspect ratio of the images. There are many images and they are all different dimensions.
I want to resize them for webpages to a standard width (300) and have the height be automatically adjusted to the new width (proper aspect ratio).
When I try to create the script, it automatically uses the aspect ratio height of the image that was used to create the script.
When it runs on additional images it automatically sets their height to the height of the first image (used to create the script). As all of the images have different dimensions, the end result is wrong.
Is there a way to write the script so that it will maintain the proper aspect ratio of multiple images, all with different dimensions?
how to apply a filter to a Floor Plan to color code my Walls by Unconnected Height for coordination purposes?
I want to disseminate which walls are currently modeled to deck and which ones stop short so I can selectively coordinate this.
This seems completely logical, but I don't see the option to allow this.
Why does Revit allow me to schedule the Length of a Wall, but not it's Height - am I missing something?
I was wondering how I can make the PENCIL(I accidentally put brush) or something to paint 2 x 2 pixels? This is for some pixel art.
View 4 Replies View RelatedI am using some drawings created by others in ACAD 14. I am using the existing font styles contained in the drawing which utilizes the Simplex font. However my text heights are different. My 1/8" font height is slightly larger than the 1/8" height contained in the drawing. When I use Properties to check the fonts it shows Simplex font and 1/8" height for both existing and new text, but mine is visibly larger. And it prints larger. I'm using LT'09. Win XP
View 3 Replies View RelatedI have for days now tried to export a 3d polyline from Autocad Map3d into ArcGis so that i may be able to view a height any where along the polyline. I just keep getting a height of zero.
View 4 Replies View Related way using autoCAD LT 2014 to get CAD to display the elevation heights of survey points without having to type the heights in text boxes next to each individual point. i can insert a field which displays the elevation of the point but doing this again i would have to do every point individually.
Other words is there a way to select all the survey points required and get CAD to display a certain property, which in my case is the elevation height of that survey point, next to it? so the survey points look like ---> x 23.35, x 23.57 etc..
Is there a way of displaying mounting heights of fixtures and fittings on elevation in revit architecture, like using a 300mm grid or something
View 1 Replies View RelatedIs it possible to move lines from different heights on the Z to "0"?
I am trying to use Architects drawings that have multiple line that look to intersect on looking from the top. but when you view them the front or side they are on different heights.
When I draw lines that don't start/end touching a line drawing by the Arch they are on the "0" height on the Z.
Not sure what they used to draw these original. Using Arch lines as reference to draw detail is not working very well, its taking way to Lang to do anything.
See Attached
Use the view to choose between front, top and Isometric.
I have a 3 story building. We are almost finished with design development. I need to raise the building's first floor which will cause all the other floors to change their level heights. I have been told that we need to fake in level markers because to change the level heights will cause all the information (for example dimensions) to disappear because they are 'tied' to the original level height. Is there a way to raise the building without loosing all the work that has been done?
View 9 Replies View RelatedI would like to watermark a logo on a batch folder of photos, but the photos are different heights (but same width). If I use text in Photoshop it's not a problem, but if I use my logo the Action places it in different positions depending on the height of the photo.
What I am looking for is a way to have the logo placed in a relative position to the bottom right corner of the photo. Say, 25px from the bottom and 0px from the right. I am unsure of how to achieve this relative placement.
Is there a better way of achieving this (screen snip attached). To get the roof segments off lower plate heights I have added in temporary walls corresponding the higher plate height, picked by footprint then extended the overhang on these segments to hit the lower plate height. Then erase the temporary walls. But this detaches the edit footprint-edit overhang function.
Is there a better way? If only a line element would host a roof to enable slope and overhang association.
What are some of the techniques to trim unwanted pounds off a subject in your photo to make them look more trim and fit? What are the best and easiest ways to accomplish this?
I am wanting to trim the waist, hips and stomach area on a few models in a profile pose to make them more shapely.
I am a beginner with PSP and would like to get some hints on the following two tasks:
- When I have two .JPG files, how can I form a PSPX3 picture with the contents of the two files arranged side-by-side which I can then store as a single .JPG file (this is the kind of picture I want to show at a presentation)
- When I have one .JPG file, how can I construct a PSPX3 picture that consists of the contents of this file (say, in the left half) plus a free space of the same size right adjacent to the loaded picture where I can add some text items?
Maybe even a suitable hint to where I find the steps to perform these tasks in the user manual (and how they are called in PSP terminology) would be a first step to find a solution (you need not copy the user manual!).
Is there a way to force Inventor to dimension without snapping to various Z heights within a drawing view? I have basic top and side views created however when trying to dimension overall lengths and widths i'm snapping to high and/or low points of the model and getting screwed dimensions.
View 4 Replies View RelatedWith no luck, I have been trying to figure out how to insert a blank value for ceiling heights in a finish schedule. There are other rooms with blank values, however it appears that rooms that once had a ceiling can no longer have a blank value. From the research I've done it seems the only way to correct this may be to delete and recreate the room.
View 7 Replies View RelatedI'm new to drawing and I need getting my text/dimensions to be legible on an 11x17 sheet. I had no problems when my company used Arch D (24x36) but in an effort to "going green" we converted to the B size paper (11x17).
Any useful chart for plotting in different scales. Maybe a standard size chart. I usually print in 3/8", 1/2", 6", and full size paper space viewports.
What I would like to do is create volume calculations from spot heights. All i have is 4 rectangles with a 10m interval, nine elevations, no points or anything else.
What steps do i have to go through to make this possible?
The cursor in my CS4 has turned into three different "figures" in line. This makes the program almost impossible to use and I cannot fin a way to come back to the normal "cross" again.
View 8 Replies View RelatedIs it photoshop made or 3d area?
View 9 Replies View RelatedI have a drawing that is about a month old with survey data and a surface in it. I went in to modify the surface and noticed a crossing breakline message that was never addressed. I attempt to do a grip edit on the survey figure that is crossing ,and update the database from drawing and I get a message saying the figure is in not in the database. I know I have the correct database, because if I select the figure in the prospector tab It highlights the one I'm working with. Somehow the objects in the drawing have lost association with the database.
Any solutions short of re-inserting all my figures from the database? I'm not going to do that in this case since the edit was small and is already done.
(running C3D 2012 sp4, Win7 64bit, 8GB)
New to CAD, so probably typical newby problem. When I try to draw (in Nanocad, since it's the only one I can afford) I don't see what I'm doing, i.e. the lines and figures keep disappearing when I move the cursor. Trying again I see my drawings very briefly and then they're gone again. Tried all and every button, menu etc. and hardware is okay.
View 7 Replies View RelatedI saw where you can make DVD Menus that will work with DVD Architect using PhotoShop, can that be done with Photo X2?
View 2 Replies View RelatedI have a static picture, and a already-made gif from a friend.I want to put the animated gif INTO the static picture, and make it a new gif.
As in, the original animated gif remains animated and functions all the same, but basically now it is just part of a photo which remains still. For example, my specific idea currently is a photograph of my city I took, but I want to put the animated gif over a billboard that is in the photo.
