I'm creating a sprite-sheet and therefore need to be able to focus on certain parts of the image, at a time.
This however, is proving surprisingly difficult as I can't figure out if there is any way to pan my view of the image so that any part of its edges is centralized on my screen. Is there any way to do this or are there any relevant plugins available?
When you zoom into the picture that's being edited, scrollbars appear but you can scroll only to the edge of the picture, pixel in pixel this way it's pretty hard to capture the edges with selection
How to add a free space to all sides so it will be possible to move edges of the picture to the center of the screen and work with them easily?
Here is what I want to do. I have the letters 'XC' which I've played with a bit to look the way I want and due to anti-aliasing has nice edges. Now I want to basically fill those letters with an image. I can't figure out how to do this and keep the nice anti-aliased edges.
Current steps:
1. load image as base layer
2. Create new layer with text in it
3. using magic wand select a threshold that has smoothest edges on text layer
4. select image layer and copy the selection area... notice the hard edges of the finished result in the attached example. I want it nice and smooth and anti-aliased.
How to do this more elegantly? I've attached the basics of what I'm doing and the result.
Attached Thumbnails
I darken the edges of an ebook cover I'm working on. Can I do that in paint.net.
View 2 Replies View RelatedI am attempting to make some combined images to make jewelry for my family but when I cut out an image from one picture and paste into a new layer above a different background, my cut image has white surrounding it, even after I have gone into 1600 zoom and removed all traces of white. I think the cut image is clean then I tell the program to print preview and wow, serious white outline, how to get rid of it? It sure makes my final print really juvenile and cheezy. Using Paint.net v3.5.8. to cut out images. Using ms Word to resize, layer and group images although I seem to have the same issue using paint.net too.
View 10 Replies View RelatedI am designing ads in MS Publisher then copying and pasting into "paint.net" to the save & upload to photobucket.
Everything been working fine until this week and box edges are being cut off (right side & bottom).
I've included 2 pics; a correct one (canisters) and one not right (flr lamps).
Paint Shop Pro X5.
I have some photos of old magazine covers, some of which weren't taken straight on, so that the covers aren't square. With previous versions of Paint Shop Pro, I could drag a corner out until it made the image look square [actually, rectangular], but I can't figure out how to do it with this version.
how to square up the edges of an image?
I am having little diffilculty with rotating a layer and maintaining straight sharp edges to the layer.
Lets say I draw a solid colour rectangle, when I rotate the rectangle the edges become jagged. Is there anyway to avoid this?
I have tried various plug-ins to blur/feather the edges, but I require a sharp finish.
I have attached a sample of one edge.
Attached Thumbnails
For example, say I had a dot, and I selected it, and it was on a corner of a 500x500 pixel square, how can I center it in the middle of the whole screen?
E.g. ;
_____
|. |
|___|
How can I get that dot to center in the middle?
I have just started using the Paintshop Pro X4. In fact, I am still using the trial version and I want to use it so I can see if I want to buy it in a couple of weeks. However, I am not really very knowledgeable about computers, computer language and all the technical stuff. So things have to be pretty obvious to me.
Just for practice, I have downloaded a photo of a cherry and a leaf. Not great art, but a nice clear photograph. Of course I want it to be larger than the thumbnail image, so I have blown it up to 6"x6" Now the edge of the cherry, the leaf and the stem are all jagged. I know that is because of the pixels - but I still want to know how to get around it and smooth the edges when I enlarge something.
I'm, trying to make an animated gif from a png image. I managed to do it, but there's a small problem... when I convert the png to gif (to make the animated gif afterwards) the image gets a strange white border around the edges. I tried to play with the Dithering and Tansparency threshold, but to no avail.
[URL]
How can I avoid this with Paint.NET?
I've got lots of pages of B&W scanned images that are not quite centered. My usual method for centering them would be:
1. Open image.
2. Ctrl + Shift + N to create a new layer.
3. Select the Paint Bucket tool and fill the new layer with white.
4. Move the new layer down using the arrow button on the Layers window.
5. Select the top layer again by clicking on the Layers window.
6. Select the Move Pixels tool and drag the image until it visually looks centered.
7. Ctrl + M to merge layers down.
8. Save.
Is there any smarter, faster, fewer clicks way of accomplishing this? Is there any way of programming this so I don't have to visually center each page?(Also, I usually have to close and reopen paint.net after about 10 pages because the program isn't freeing all memory when files are closed.)
I need to centre text and centre an image layer.
View 2 Replies View RelatedWhen I use Paint module with Graphics menu, I get bad edges randomly on the image in action. The default setting of Anti-aliasing in paint module is 4 now, and I have tried to change the value from 4 to 1, 1 to 4. the only differences are the amount of, position of bad edges.
I also tried to check the "Divide" function in the media-list, but it gets from specific colour to white. I only want to take the bad edges away from the image.
I have two related questions:
1. I am not able to do a somewhat basic task. I have an image on a seperate layer and I want to merge it, but I want the edges to be more softened.I used to use photoshop deluxe, it had a paint brush with a soft round tip that you could make hard edges softer. Its not like smudge, more like a softer eraser. Is there a way to do that?
2. Is there some way to make any image gradually more transparent either from one edge to another or from the center out? (Like the effect you get using gradient, but with a gradual opacity to an opaque object/image)
The gray box has a solid gray color on the edges but white towards the center. How do I make this effect?
View 9 Replies View Relatedway to redefine a point that was placed in a model with a "Center of Loop of Edges" command? Inventor doesn't seem to recognize type of placement unless it's been selected from the Point drop-down menu, but picking this in the midst of a redefine only creates a new point, it doesn't redefine the original point.
As it is, I've been forced to just delete the original point, create a new one and go from there.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
I have been trying how to figure out how to make the center if an object transparent with color gradually appearing on the borders. The transarency tool insists on starting with a solid color in the center. If using a square as an example, how do I make the center transparent with the edges graduating to a solid color?
View 5 Replies View RelatedEvery time I use the paint bucket on something, it always leaves a small grey outline on the edges. How to get rid of that?
View 3 Replies View Relatedhow do I stop an image aligning itself to the edges of the image area.
View 2 Replies View RelatedI have been using Paint.Net for a while now, but the one thing that I cannot seem to figure out how to do is give my squares and rectangles a rounded corners.
View 2 Replies View RelatedI have this image attached but I am not satisfied with the edges. Is there a possibility to smooth or is there a dll to do this.
Attached Thumbnails.
[URL] how to fade the edges in the way I want to, I can fade them one by one in each layer and then select all, but the result is very unsymmetrical, and the fade effect starts to late and it's in too much quantity.
View 2 Replies View RelatedHow do I cleanup some of the edges around these images?
View 3 Replies View Relatedwhich tool/s to to create an elliptical frame that I can pick up and paste would be sufficient to get me going.
I have a photo picture which I made 'elliptical'. You can see I have tried to make it elliptical using Word but the edges are messy (see attachment).
I have cut out a picture of a rose using the ellipse tool. It is now in the shape of a circle. All I want to do is fade the edges of it, so they are blurred.
View 7 Replies View RelatedWhen you try to select a human face (and maybe body) from a complicated background then seperate it. You'd end up with this face having small parts coming off its edges (ends). You might try to use the eraser to some extent. Still the face or body will not look smooth. How to smooth it?
View 1 Replies View RelatedI used the TUT S3D#1:Different image on each sides of a cube.(EASY) by ASH for an image im working on for my wife. there was a pic posted at the end of the thread that had the edges of the cube looking rounded and glass like i have tried to get this effect but have been unsucsessfull and here is the image i am talking about the image is Her last post (#133) or click here
View 2 Replies View RelatedI'm trying to figure out how to fill this text with smooth edges. The blue part is the font I'm using and the white part is what I filled, using the paint bucket. You can see some jagged/uneven edges between the white and blue. I have tried different blurs, median at low radius, smart blur and several other things. I have even tried those things on just the blue text before filling with the paint bucket and it still shows up like this.
Linked to oversize image
I've been fooling around with paint net to get acclimated. I know how to make rectangular banner - but I would like to make a banner that has rounded corners. Does paint net allow me to do that>?
View 11 Replies View RelatedIs there a way to get some straight edges if an image rotated a few degrees?
View 13 Replies View Related