When you try to select a human face (and maybe body) from a complicated background then seperate it. You'd end up with this face having small parts coming off its edges (ends). You might try to use the eraser to some extent. Still the face or body will not look smooth. How to smooth it?
View 1 RepliesI have this image attached but I am not satisfied with the edges. Is there a possibility to smooth or is there a dll to do this.
Attached Thumbnails.
I'm trying to figure out how to fill this text with smooth edges. The blue part is the font I'm using and the white part is what I filled, using the paint bucket. You can see some jagged/uneven edges between the white and blue. I have tried different blurs, median at low radius, smart blur and several other things. I have even tried those things on just the blue text before filling with the paint bucket and it still shows up like this.
Linked to oversize image
i'm trying to plend a face (happens to be Justin Timberlake) into the face of a snake, I have the selection matched up and have the layer mask so i could erase the extra. The main problem I am having is the difficulty of getting the colors and textures right, the actual blending the face in part.
View 5 Replies View RelatedWe intend to create a human mask for our humanoid face. Wonder where I could download a CAD model where I could thicken the surface to form the mask.
View 6 Replies View RelatedI tried the following in Illustrator,
So basically, I created coloured text inside Adobe Illustrator and however much I zoom into the text, the text always appears to have smooth edges. Once I click on 'Save For Web', the edge all around the text becomes rough and aliased. I chose GIF and PNG, but it still happens. The text is on a transparency background. The same problem applies to images when I am creating a logo.
How can i take a sample of human skin on an image and give a different image the extact same skin, i know you can replace the colour, andr HSL, but the skin never looks like the skin does on the other image, you dont get the shaes and blemishes etc.
If i cut out a sample of the skin and overlay it on the image, again this just seems to lightnen the image.  Is there some kind of plugin that will sample the skin on an image and strech it onto another image and hence give some image the extact same skin as from where the skin sample was taken?
Say i wanted to give nicole kidman, britney spears face skin what most advanced, realistic way of doing this, without just trying to matching one colour and replace the whole skin with one colour?
I need some filter plugin for Photoshop, for peoples portraits, to look much better, producing smooth skin. Any filter for photoshop aveilable?
View 3 Replies View RelatedHow to make a human figure look like it has REAL depth.
Â
If you have ever seen any of Ken Burns documentaries he uses a lot of pictures in his films from the past, but some of the figures or people in these stills appear in depth in such a way that they do not look flat.
Instead when the camera pans the picture they appear to be almost three dimensional inside the still. You can almost see in his stills there is a curvature to the outline of the figure. Their heads and bodies look as if they are inserted into the picture.
I have the removal of the background in the image down well enough but I don't know how to make the figure appear as if it is 3Â dimensional in the new background. I wish I had a link to add here of his work as an example.Â
1. what is the best selection tool? i use the polygon one, but i think there are betters. by the way, is the computer suppose to make a lot of noise while i use it? it seems like it takes a lot of power from it. =/
2. i saw a video on youtube where a person's eyes were turned red (demon type of stuff). what tool would i need for that?
3. what can a person do to a liquify tool (the expanding one) to make it seem more realistic instead of "thick"?
4. if i'm editing a person's face, how would i make it "smooth" and "light"?
Im trying to make some silhouette of objects.
I use the majic wand tool to get the shape and fill it in with a colour...
The end result is very jaggy... how i can make the edges smooth?
I'm trying to smooth the edges of an image I have. Would like to try two things.
First is,- simply smooth the edges (this is an image with people in it, and not a shape,-so I don't get the wanted effect when I do "Gaussian blur" as the whole image is being blured).
Another thing I would like to achieve is i.e. having a 600*800 image(white background) with a smaller image in the middle. Then somehow manage to blure the edges of the image and by using a gradient colour to make the blured edges cover the empty area around the pic as well... (The gradient to start at the edge on each corner of the pic and finish at outer edges of 600*800 image)..
Also, is it possible to draw a frame? Have a pic which I would like to create a tilted frame around (CTRL+T). Only manage to draw a coloured square/circle, then having to cut out the middle of the square to see the image on the layer beneath.
Created a new style in "Layer style", but where do I find this saved style?..
smoothing the edges of this character.
way to smooth the outside of this character without manually having to use the polygonal lasso tool?
I use a stencil just with straigh tlines. When using that stencil on a cube or plane it works like a charme. The edges look smooth and like a perfect cut.
Â
The cube below has about 98.000 polys.
Â
when I do the same thing on a base shoe model, the edges do not look good anymore.
Â
even by increasing the poly count to 4 millions.. the edges are not smooth anymore.
Â
I double checked the base geometry of the shoe. it's all in qauds, and the edge flow is very nice done.
- how can I make sure that the lines will appear as smooth and nice like shown on the cube ?
In GIMP 2.8, I've been having a great deal of trouble getting good edges around elements that must be overlaid onto new items.
Such items seem to need (a) a progressive blur around the edges and inward to its center, and (b) a decreasing opacity from the edges and inward toward the center.
I cannot figure out how to satisfactorily achieve this. I use this all the time, but now in 2.8 I cannot. (The only "solution" I can think of is using a fuzzy brush around the entire perimeter, but that does not blur it, and, of course, it takes forever....there's no point in even having a matte if you're going to do it manually!)
1 - how do I put this texture on the wing, without copying and pasting?
2 - how to make the gradient smooth face?
What parameters use?
I am a novice in photoshop and I've been trying to accomplish what seems to be an easy process. I received an illustrator file of a logo that I'm trying to work on...it has several issues that I'm trying to fix...in photoshop how to use illustrator. My major issue is recoloring parts of the image while keeping the edges smooth. It's currently brown and I just need it black. I have tried the following methods:
Â
-Magic wand the brown part and create a new layer via copy
  -using brush to simply paint over it
  -using paint can to fill the selection - anti aliased, I've changed the tolerance a million times
Â
-Use straight paint brush to trace over it, using a soft edge brush
   -my hand isn't steady enough to do it
Â
-Magic wand and create new layer then do and over lay
Â
-Converting it to black and white
   -it turns gray
I'm using PS CS4 and trying to Save for Web & Devices an GIF transparent animation, but I need it to be with smooth edges. I tried to add different type dither to the transparency but I don't like the result at all. How to make the animation with PERFECT SMOOTH edges?
View 2 Replies View RelatedThis is just a quick job i need doing, i dont have photoshop yet.
So... I need the egg from this pocket god icon cut out with smoothened edges. Thats all
I make a hard job of it in gimp/paint
Trying to create smooth edges. I have been working on my own logo. I have C4 Photoshop (Web Prem). I have been creating circles on a transparent background. When I applied logo on one of my images I notice little white doted edges. I see little white dots. What is the best way to create clean edge on transparency backgrounds?
View 2 Replies View RelatedHow do you smooth the edges of your shape? I'm hoping there is a 1-2 step process. Everywhere I look on the internet is a 6-7 step process for doing this basic task.
View 1 Replies View RelatedI have a regular 1024x768 image and I want to grab a piece of it say 780x125 for my Website logo. Well I use the rectangular marquee to get that exact piece, go to Modify -> Smooth edges to 10 pixels so now all four edges are pretty smooth. Problem is I only want the two top edges smoothed out, I want the bottom ones plain with pointy edges, what will I have to do to achieve that?
View 4 Replies View RelatedHow can I get smooth rounded edges?
Let's say, for argument, I want a "square" with rounded corners. So I take the shape tool at 50px radius and draw my square. Right off the batt, the round parts look like utter junk.
What other technique could yield a better corner?
Also note that I can take the blur tool and blur the corners so they are somewhat nicer, but then if I put a shadow on the box, you can clearly see the shadow doing weird things on the blured part. Obviously, with all the beautiful PS images out there, smooth rounds are easily obtainable, not these wildly pixelated corners the shape tool gives me.
What can I do that can be as easy as the shape tool?
I have this cylinder (purple) that I want to cut into this smooth curved sheet.
I have thought about booleans but I don't understand why the stack closes and how to smooth the new sharp edges created when i do it.
How would you go about it?
The aim is to create a cylindrical opening in the sheet while maintaing the smoothing, while getting the edges themselves smoothed.
My stack is EditPoly, TurboSmooth, Bend, Box.
maybe it`s just that photoshop`s not the thing to use, but are there any ways to have nice smooth edges when making diagonal lines?
It`s puzzling that such an amazing program can't simply do this.
I am trying to create shapes in photoshop but they all seem to have rough edges. Is there a way around this? 1. I have been using the "rectangular marquee tool" to draw a square. 2. Filling it in with a color 3. Then to Edit > Transform > Skew. Then I pull in show corners, push some out. Now the edges look horrible.
View 5 Replies View Relatedi have an image that i can select with the Magic Wand Tool (W). Only problem is the image is kinda jagged around the edges... my question is, how do I make the edges smooth?
View 2 Replies View RelatedI hope you understand what I mean but, when I make a selection and fill it the edges are not antialiased, it's really annyoing and I can't figure out how to get smooth edges.
View 4 Replies View Relatedwhat can i do to the image so that when it rests agains the background (which in this case is a repeated gradient "sliver" in the CSS {background-image: ..}) it doesn't "look" like it's just stuck there.?
my technique thus far is to simply make the area transparent around my intended visible content, and save-for-web, then choose png (for colors, or gif if it's simple) and wa-lah, i have my transparent image w/ clipping paths. (forgive my mangled jargon). i have tried doing things such as using blending layer effects > inner-shadow, or bevel/ emboss... which sometimes seems to help the problem a bit, but i'm sure there is a better way.
I need an image on my website with a transparent background. I first tried creating this as a gif, but it looked horrible over my website background image. Then I tried saving it as a png, which looked much better, but it has jagged edges. What is the right way to create a transparent image in PS so that it will have smooth borders? It is basically a circle, about 60 px wide, with a solid color in the center and a border of about 2 px. Nothing fancy. It looks perfect in PS but once I embed it on my page over the background image, it looks a mess.
View 4 Replies View RelatedHow can I align edges so the object looks smooth?
View 4 Replies View Related