I have this cylinder (purple) that I want to cut into this smooth curved sheet.
I have thought about booleans but I don't understand why the stack closes and how to smooth the new sharp edges created when i do it.
How would you go about it?
The aim is to create a cylindrical opening in the sheet while maintaing the smoothing, while getting the edges themselves smoothed.
My stack is EditPoly, TurboSmooth, Bend, Box.
I tried the following in Illustrator,
So basically, I created coloured text inside Adobe Illustrator and however much I zoom into the text, the text always appears to have smooth edges. Once I click on 'Save For Web', the edge all around the text becomes rough and aliased. I chose GIF and PNG, but it still happens. The text is on a transparency background. The same problem applies to images when I am creating a logo.
How to achieve smooth and yet sharp finish in my pictures. I came across this tutorial however was wondering if there is any other way:
[URL]......
And here he is the website with example photos with the finish I am talking about:
[URL].........
I'm trying to make the edges sharp, when I use the Rectangle tool there is a 1px line on the edges which I think is suppose to blend the image to the background, but I don't want this 1px line, I want the edges to be sharp. How do I switch this off.
Using CS2, and I'm sure this is a default setting because I remember reading something about it in the book but now I can't find it.
I have designed a small gif motif for a webpage. I used paths which I then filled so it would be sharp. However, when I reduce it to the size I would like on the web page (about 45 pixels) , the edges look ragged. I can't seem to get rid of the bitmapped look.
View 2 Replies View Relatedit seems it's impossible to paint sharp edges in mudbox (ie when painting there is no softness to the brush)... is there a good way to do this that i'm missing?
View 4 Replies View RelatedI want to make my walls to be adjusted to the ceiling.
View 1 Replies View RelatedIs there a stock filter or one that can be added to GIMP that sort of rounds the edges of sharp parts of an image?
I'm looking for a filter or effect that can round the sharp edges of a bitmap image of a font, to give it that 'Xerox Machine' effect where a sharp font looses it's sharp corners and gets a rounded effect from being copied over and over.
I already tried the 'Gaussian Blur' filter, but that just creates soft edges and not the rounded corners that I'm looking for. The effect that I'm looking for is not fuzzy or blurred, but is more of a 'rounded corners' effect... it can be seen in the attached image that is below.
Attached File(s) Universal_Picture.jpg (34.92K)
Number of downloads: 4
The printout of my AI CS6 file on my Canon Pro 100 is pixelated. Is there a solution to retain the sharp edges?
View 6 Replies View RelatedI have Photoshop CS5. When stroking type, I can't get the edges/corners sharp (see attachment)- is there a way to do this? Possible in CS6? I believe possible in Illustrator, but cheaper and easier for me to do it in Photoshop if possible (I don't have any version of Illustrator), and I won't have to learn a new program.
View 6 Replies View RelatedWhen I try to merge multiple images into one - like overlays and what not I always end up with 'sharp' edges between the layer - anyone have any suggestions as to how I can soften them up some?
I would imagine part of the problem is I have been using the polygonal lasso to help block off the areas i want to layer mask - I have tried the free hand lasso but the results are too wonky.
after updating from LR 4.4 to 5.2 i have a problem with my existing catalogues: All my existing pictures with healing brushes in it now have sharp edges instead of the edges they had in LR 4.4 by default. I used the brush often, so the main part of my work looks deformed now in LR 5.2.
View 4 Replies View Relatedi watched a find edges sharp skill , and it's great but i'm was not able to create a good action..is there a good action ?
View 5 Replies View RelatedI want to design letter S like following image with sharp edges and in vector, So that I will not loose quality if it made into any big size.
View 18 Replies View RelatedI'm trying to snap a head with it's neck with the merge edge tool, but somewhere along the way, the edges lost there border edge characteristics and now I can't merge the edges. Is there a way to make the edges back to the way they were?
View 1 Replies View RelatedI want to design letter S like following image with sharp edges and in vector, So that I will not loose quality if it made into any big size. just trying to start with CS6, I've installed it so I'm looking forward with detailed and perfect method to follow to draw my "S".
View 7 Replies View RelatedI have two images/photos to which I applied a gradient feather effect. The documment printed fine, but when the PDF is viewed online in Fire Fox, the gradient feather no longer displays and only the sharp edges of the photo are visible. Is there a specific setting when saving to PDF that I need to select for best viewing online? I'm on a Mac CS 5.5.
View 5 Replies View RelatedIm trying to make some silhouette of objects.
I use the majic wand tool to get the shape and fill it in with a colour...
The end result is very jaggy... how i can make the edges smooth?
I'm trying to smooth the edges of an image I have. Would like to try two things.
First is,- simply smooth the edges (this is an image with people in it, and not a shape,-so I don't get the wanted effect when I do "Gaussian blur" as the whole image is being blured).
Another thing I would like to achieve is i.e. having a 600*800 image(white background) with a smaller image in the middle. Then somehow manage to blure the edges of the image and by using a gradient colour to make the blured edges cover the empty area around the pic as well... (The gradient to start at the edge on each corner of the pic and finish at outer edges of 600*800 image)..
Also, is it possible to draw a frame? Have a pic which I would like to create a tilted frame around (CTRL+T). Only manage to draw a coloured square/circle, then having to cut out the middle of the square to see the image on the layer beneath.
Created a new style in "Layer style", but where do I find this saved style?..
smoothing the edges of this character.
way to smooth the outside of this character without manually having to use the polygonal lasso tool?
I use a stencil just with straigh tlines. When using that stencil on a cube or plane it works like a charme. The edges look smooth and like a perfect cut.
The cube below has about 98.000 polys.
when I do the same thing on a base shoe model, the edges do not look good anymore.
even by increasing the poly count to 4 millions.. the edges are not smooth anymore.
I double checked the base geometry of the shoe. it's all in qauds, and the edge flow is very nice done.
- how can I make sure that the lines will appear as smooth and nice like shown on the cube ?
In GIMP 2.8, I've been having a great deal of trouble getting good edges around elements that must be overlaid onto new items.
Such items seem to need (a) a progressive blur around the edges and inward to its center, and (b) a decreasing opacity from the edges and inward toward the center.
I cannot figure out how to satisfactorily achieve this. I use this all the time, but now in 2.8 I cannot. (The only "solution" I can think of is using a fuzzy brush around the entire perimeter, but that does not blur it, and, of course, it takes forever....there's no point in even having a matte if you're going to do it manually!)
I am a novice in photoshop and I've been trying to accomplish what seems to be an easy process. I received an illustrator file of a logo that I'm trying to work on...it has several issues that I'm trying to fix...in photoshop how to use illustrator. My major issue is recoloring parts of the image while keeping the edges smooth. It's currently brown and I just need it black. I have tried the following methods:
-Magic wand the brown part and create a new layer via copy
-using brush to simply paint over it
-using paint can to fill the selection - anti aliased, I've changed the tolerance a million times
-Use straight paint brush to trace over it, using a soft edge brush
-my hand isn't steady enough to do it
-Magic wand and create new layer then do and over lay
-Converting it to black and white
-it turns gray
I'm using PS CS4 and trying to Save for Web & Devices an GIF transparent animation, but I need it to be with smooth edges. I tried to add different type dither to the transparency but I don't like the result at all. How to make the animation with PERFECT SMOOTH edges?
View 2 Replies View RelatedThis is just a quick job i need doing, i dont have photoshop yet.
So... I need the egg from this pocket god icon cut out with smoothened edges. Thats all
I make a hard job of it in gimp/paint
Trying to create smooth edges. I have been working on my own logo. I have C4 Photoshop (Web Prem). I have been creating circles on a transparent background. When I applied logo on one of my images I notice little white doted edges. I see little white dots. What is the best way to create clean edge on transparency backgrounds?
View 2 Replies View RelatedHow do you smooth the edges of your shape? I'm hoping there is a 1-2 step process. Everywhere I look on the internet is a 6-7 step process for doing this basic task.
View 1 Replies View RelatedI have a regular 1024x768 image and I want to grab a piece of it say 780x125 for my Website logo. Well I use the rectangular marquee to get that exact piece, go to Modify -> Smooth edges to 10 pixels so now all four edges are pretty smooth. Problem is I only want the two top edges smoothed out, I want the bottom ones plain with pointy edges, what will I have to do to achieve that?
View 4 Replies View RelatedHow can I get smooth rounded edges?
Let's say, for argument, I want a "square" with rounded corners. So I take the shape tool at 50px radius and draw my square. Right off the batt, the round parts look like utter junk.
What other technique could yield a better corner?
Also note that I can take the blur tool and blur the corners so they are somewhat nicer, but then if I put a shadow on the box, you can clearly see the shadow doing weird things on the blured part. Obviously, with all the beautiful PS images out there, smooth rounds are easily obtainable, not these wildly pixelated corners the shape tool gives me.
What can I do that can be as easy as the shape tool?
I have this image attached but I am not satisfied with the edges. Is there a possibility to smooth or is there a dll to do this.
Attached Thumbnails.
maybe it`s just that photoshop`s not the thing to use, but are there any ways to have nice smooth edges when making diagonal lines?
It`s puzzling that such an amazing program can't simply do this.