Paint Shop Pro :: Cleanup Some Of The Edges Around Images?

Jun 30, 2011

How do I cleanup some of the edges around these images?

View 3 Replies


Paint Shop Pro :: Cleanup Script?

Sep 20, 2012

Had a computer crash during an uninstall of PSP X5 and now I can't install or uninstall as the installation reads that there is already a version installed. Is there a program to clean out the remnants?

I have used one in the past that was provided on the forum for a previous version.

View 2 Replies View Related

Paint Shop Pro :: X5 / Squaring Up Image Edges?

Oct 23, 2013

Paint Shop Pro X5.

I have some photos of old magazine covers, some of which weren't taken straight on, so that the covers aren't square. With previous versions of Paint Shop Pro, I could drag a corner out until it made the image look square [actually, rectangular], but I can't figure out how to do it with this version.

how to square up the edges of an image?

View 7 Replies View Related

Paint Shop Pro :: Creating Custom Edges / Frames?

Dec 28, 2011

Using X4 on Windows 7. I'm trying to create a series of custom edges to supplement those already supplied in X4. I've created the edge ok and exported it as a frame and it works ok. The problem is selecting it in the dropdown menu under Image/picture frames. Whereas the thumbnails of the supplied edges have grey shading to represent the transparent section of the edge, mine don't, they are just plain white and that makes it difficult to know what edge to select. What have I done wrong? I've opened a couple of the supplied edges and they look similar to mine ie no shading.

View 3 Replies View Related

Paint Shop Pro :: Oval Vignettes And Feathered Edges?

Dec 3, 2013

i have just downloaded a trial version of Paint Shop Pro X6 because I'm looking for a program that will go a good job on oval vignettes with soft (feathered) edges.

I can open the program and select a picture from my files. Through the videos I learned how to identify some of the PSP X6 tools. I click on the Ellipse tool on the lower left in the tool bar. Then it gets weird. Sometimes I'll make an ellipse on the photo and the ellipse outline stays there. Sometimes when I do this an oval is created. Every time an oval is created my picture is the background, and the part of the picture I want is white. It's like it's doing it backwards. I've seen the tutorials about selecting INVERT, but I've had no luck whatsoever with that.

This should be a very simple process, but I'm totally mystified how it works. I used to run a very simple program years ago that Microsoft put out called PictureIt. I really liked that program but it's outdated now and it won't work on the Windows 7 64 bit I'm using. I have tried several programs and Paint Shop Pro X6 seems to be the closest to Pictureit that I can find, but I'm expecting PSP X6 to be more advanced, precise, and better overall. In PictureIt I'd do the exact steps I just mentioned and the area I selected would be the oval picture, the rest was white, and then I feathered the edges. In PSP X6 it's mostly like that, but it's reversed. The picture I want is the background.

View 14 Replies View Related

Paint Shop Pro :: Smoothing Enlarged Image Edges

Jul 12, 2012

I have just started using the Paintshop Pro X4. In fact, I am still using the trial version and I want to use it so I can see if I want to buy it in a couple of weeks. However, I am not really very knowledgeable about computers, computer language and all the technical stuff. So things have to be pretty obvious to me.

Just for practice, I have downloaded a photo of a cherry and a leaf. Not great art, but a nice clear photograph. Of course I want it to be larger than the thumbnail image, so I have blown it up to 6"x6" Now the edge of the cherry, the leaf and the stem are all jagged. I know that is because of the pixels - but I still want to know how to get around it and smooth the edges when I enlarge something.

View 3 Replies View Related

Paint Shop Pro :: Decrease Or Remove Pixelation From Edges Of Low Quality Photo

Jun 25, 2012

Im using Corel Photo-Paint X5 and was wondering how to decrease or remove pixelation from the edges of a low quality photo? Iva attached a sample below:

View 3 Replies View Related

Paint.NET :: Blur Edges Of Images For Client Website

May 18, 2013

how to blur the images for a client website..What I have done is to take 2 images and put them alongside each other, but I need to blur the area where they join to make the join look less severe.Also, I need to blur the complete outer edge of the whole image as well.

View 13 Replies View Related

Paint Shop Pro :: Cropping Images To 16.9?

Apr 25, 2012

crop images to 16.9 to fit the video.How do I do this in PSPro X.

View 14 Replies View Related

Paint Shop Pro :: X4 Cannot Catalog Any Images

Feb 23, 2013

PSP X4 v13.3.0.3

PSP X4 was just updated and now I can't catalog any images. I can navigate via "Browse more folders" and select my main pictures directory, but in the Organizer I see no thumbnails. i have more than 4,000 files (almost entirely .jpg files) and now I can't see any of them unless I access them via <File><Open> This is very frustrating, as I had a system that was just fine 24 hours ago, but now I'm essentially hamstrung.

View 5 Replies View Related

Paint Shop Pro :: Images Outside X4 Are Darker

Nov 6, 2012

After working with some pictures in PaintShopProX4 I saved them as jpeg and tif, but the brightness of the pictures is different ( they are darker) outside PaintShop. Is there something I should do to keep the original brightness?

View 2 Replies View Related

Paint Shop Pro :: Developing Raw Images

Apr 24, 2012

Am I better off using the Olympus software to develop my images, then using PSP X4 to edit them? Regardless of which software I use to develop, why make any editing changes before I develop if I can then edit after I convert to a Tiff or JPEG?

View 3 Replies View Related

Paint Shop Pro :: Can't View X3 Images

Jul 4, 2011

As you can imagine, I've just upgraded to X3. I just saved a .tiff image as a pspimage, without any editing. When I close it and go to re-open it, I can open it in X1 and in X3, BUT NOT IN Paint Shop Pro 9, which is and probably will remain my workhorse. The browser in PSP 9 doesn't even show the pspimage, only the .tif image. I've tried to open it in PSP 9 via Windows Explorer, but get one of two error messages: "This is not a valid pspimage" or "no preview available". Monkeying around with the File Associations in PSP 9 doesn't seem to work.

The problem arises if I want to do the bulk of my editing/restoration in PSP 9 and then bring it up in X3 in order to use one of the newer tools, such as the Makeover tool. Once I do that, I've lost the ability to re-open it in PSP 9.

Is there a way that you know of to make an X3 pspimage available in PSP 9, or is it inherantly not possible?

View 2 Replies View Related

Paint Shop Pro :: Raw Images Overexposed?

Oct 28, 2011

I'm trying out PSP X4 on the free trial. I'm on a Dell laptop with Windows 7. The camera is a Nikon D70s. I was trying to use UFRAW to transform the images from NEF format to PNG, and then GIMP to adjust and crop and resize. I've found GIMP to be really frustrating to use, so I'm dropping that for something else, hence the PSP X4 trial.

For the most part, I need it for digitally editing the documentation photos that I take of my paintings, and as well for managing our family photos. I've been using ArtRage for digital painting.

So mainly for my painting photos, I need to adjust the color balance to the gray card, adjust for lens distortion, crop, and resize.

When I open my folder of NEF files, the NEF files look really over exposed and washed out, especially compared to the PNG files that I made earlier using ufraw. They appear that way in both the viewing bar and when they're in the edit mode.

Does PSP have some kind of default viewing auto-adjustment going on? Am I missing something?

View 5 Replies View Related

Paint Shop Pro :: X4 No Images At All In Organizer

Sep 24, 2011

On the Manage page. Either in Thumbnail mode or Preview Mode I get no images.In Organiser at the bottom all I get is a row of light grey boxes with a X in it and the filename beneath but no picture.

I have associated all file types with PSP although that should not be necessary to get a thumbnail image as I tried the trial version before buying version X4 and it worked as expected.

View 13 Replies View Related

Paint Shop Pro :: How To Separate Images In A Collage

Nov 26, 2012

I have stared to create a collage, after inserting some of the images, I saved the project and closed the program (x3). When I opened again the callage, all the inserted images was merged together and I can move only all of them together.

How can I separate the images so I will be able to move each of them separately in order to insert more images and change the order of them in the collage.

View 5 Replies View Related

Paint Shop Pro :: Creating Video From Still Images

Jun 30, 2013

I seem to have a ( ongoing) or a series of problems trying to create a video from still Photos or a video that I take with my little Sony cyber shot camera. I believe that the entire problem is the file extensions. I get UDF,MOFF,MP4 to name a few.

MY Camera produces MP-4 photos I download them as such do I have to change or convert them? I tried to convert some to wmv but that did not work . I get a message that windows photo viewer may not be working and could need an update if that is needed where would I get that? I need to know what has to be done . I use corel video studio x5 and also corel paintshop pro x4.on windows 7.0.

View 3 Replies View Related

Paint Shop Pro :: Saving Edited Images

Sep 8, 2011

I have psp X3.I often need to cut images (and paste into another) using the background eraser tool and the eraser tool.How do I save the "worked on" image so I can use it again say, another day, for pasting without having to go over the same operation each time?

View 3 Replies View Related

Paint Shop Pro :: Set X5 As Default For Opening Images?

Mar 17, 2013

I have changed all the settings on my computer and in PSP X5 to make it the default program that opens any picture/graphic file except files with the psp and pspimage extension because they aren't even an option. When I try to do it, it reverts back to X4. When I try to make the changes within the program itself, those 2 file extensions aren't even in the list!

View 4 Replies View Related

Paint Shop Pro :: Color - Images Too Blue?

Aug 1, 2011

I have a problem with the display of images that come out too blue. The thumbnail looks correct but the large preview image has too much blue. I have processed the same raw images in other software with no issues but this seems to be an issue with Paint Shop Pro. Is there a setting that needs to be changed?

Once I open the image the image in the raw converter it shows the color balance "As Shot" as a different value that what the Adobe software reads. Not sure why. You can try and adjust the blueness out of the image but why do I need to do this all the time when I don't have to in other programs.

If I open any image in the full editor the thumbnail takes on this too blue look as well, even if no color adjustments were made.

I have attached 2 screen shots that show the problem.

View 7 Replies View Related

Paint Shop Pro :: Making A Blend With 2 Images

May 27, 2011

Im having problems blending photos together. Here are the steps that Im doing.

1. click on file+new+select image dimensions.
2. select images
3. click on first image hit selections, then select all
4. click edit, paste as new selection

once it paste, the picture is huge, how do I resize it to make it fit on the canvas I selected.

View 3 Replies View Related

Paint Shop Pro :: X4 Taken Over File Explorer Images

Jan 9, 2012

I recently installed Paintshop Pro X4 and have found I can no longer see the thumbnail images of photo's in windows file explorer. There just now appears lots of paintshop camera icons instead in all the directories. How do I get the images to appear again in Explorer as I use this all the time for searching and moving files???

View 2 Replies View Related

Paint Shop Pro :: Combining Images Easily

Mar 9, 2012

Using the software Photoscape is easy to combine a plenty of images. URL... if it is possible to deal with it in PSP in a way easy way as Photoscape?

View 5 Replies View Related

Paint Shop Pro :: Editing Two Images On Same Screen?

Dec 3, 2012

I'm a longtime user of PSP 8 and just downloaded the trial version of PSP X5, thinking to buy it. With PSP 8, if I wanted to edit two images on the screen at the same time, I loaded them both into the program and then used the minimize button at the upper right hand of each image to switch them out of full-screen mode and put them next to each other. PSP X5 no longer has the minimize buttons attached to the images. I can tab back and forth from one image to the other, but I can't figure out how to put them both on the screen simultaneously. Is this feature still present somewhere in PSP X5? How do I access it?

View 2 Replies View Related

Paint Shop Pro :: X3 - What Format For Editing Images

Nov 30, 2011

I'm still using PSP X3. What format more knowledgeable people for me use for editing images.

In the past, I'd take the jpeg produced by my camera, convert it to PSP format, and then when finally finished, save it as jpeg again.

I understand that the PSP format is no longer used, so should I just work in jpeg format? My understanding is that any intermediate saving would compromise image quality; if not jpeg, then what?

View 5 Replies View Related

Paint Shop Pro :: Creating Textures From Images

Jun 29, 2012

Is it possible to create textures or patterns from images in PSP v7?

View 4 Replies View Related

Paint Shop Pro :: Can No Longer Edit JPG Images

Mar 25, 2013

I'm now getting this error: "Unable to open the file. Please verify that the file is valid.", when attempting to edit a jpg.

(no problem with png's though).

Any new jpgs I create outside PSP display like this in the manager (but a new png displays OK):

Existing jpg thumbnails display OK (I expect the thumbnail images are cached somewhere), but if I try to edit any jpg, I get this:

I've checked for PSP X5 updates, and I'm on the latest version:

Note: I can view the images successfully with Windows photo viewer and I can edit them using Windows Paint, it's just PSP that's having issues.

EDIT: I'd restarted my PC to ensure I was still having the issue, and I still couldn't edit any jpgs. While I've been writing this post and taking screenshots with the snipping tool, suddenly the jpg thumbnails displayed correctly and now I can edit jpgs again... BUT...

View 14 Replies View Related

Paint Shop Pro :: Rotate Images In All Axis In X5?

Nov 24, 2012

Is it possible to rotate images in all axis in PSPx5? If not, any tip to a program doing so working with PSPX5?

View 2 Replies View Related

Paint Shop Pro :: Opening Images As Layers?

Jan 27, 2013

All I want to do is make a collage of three or four images but I can not open more than one image at a time. How do I get the images into the layers pallet so I can edit from there. I can not find anything in the user guide that will tell me how to do it. I watched and tried the video tutorial intro to layers in PSP x5 but that didn't work for me either. I am using PSP x4

View 5 Replies View Related

Paint Shop Pro :: Collecting Images For New Project

Nov 9, 2012

I want to bring into one new blank project about 12 images, resize them, mess about with them, reposition them etc...easy enough...BUT im stuck as stage one. I cant seem to simply bring in more than 1 image appears on a new sheet...Clearly im using the wrong method...

Open new project, decide on size of project/paper. Then i click bring in a photo....and bring in another photo etc..

View 7 Replies View Related

Paint Shop Pro :: X3 - White Line On Cut Images

Nov 13, 2013

Always when i cut a photo in Corel X3, save it and look to it in a other photo program, Then i have on the left side and the bottom side a white line of 1 pixel.

When i cut a photo from (for example) 1200x1600 and cut a piece from it (for example) 500x500 and i save it, i must always again cut the white line and again make it tot 500x500 pixels.

View 3 Replies View Related

Copyrights 2005-15, All rights reserved