Im using Corel Photo-Paint X5 and was wondering how to decrease or remove pixelation from the edges of a low quality photo? Iva attached a sample below:
View 3 RepliesIm using Corel Photo-Paint X5 and was wondering how to decrease or remove pixelation from the edges of a low quality photo? Iva attached a sample below
View 5 Replies View RelatedI want to copy a black and white photo which was printed (old original 'wet' method) on matte paper. When I scan it the scanned image has thin white vertical stripes through all the dark areas of the photo. I have located a method of removing them using Photoshop (using layers etc) but cannot duplicate those 'instructions' using PSP X2.
how I can remove these thin stripes (they make the photo look like everyone one is wearing pin striped clothing).
I want to know how to resize a photo without loosing quality....... in the image resize box the is a check box that says maintain file size ......what does that do .
I have tried to resize using it and the file stays the same as the original.
I shot some clips on my sony cyber shot camera (its about 2 years old so the content is not in HD). the clips are in .mpg format
i'm using the trial version for corel videopro x3 -. when i try to trim the clip, the output is not as good as the original clip. Why would this be ?
i selected the "same as project settings" option when creating the file. is there some other option i should choose ?
or is this because i'm using a trial version ?
i used to edit my clips in windows movie maker and it irrespective of whatever editing i would do, the clip quality would be exactly the same as that of the source clip.
In a photo, I cut out an elliptical or round face.I saved the cutt image as .; "New from clipboard" No problem, the background is now transparent.
But now I want to make the edges of the oval or round image transparent.(then I want to put the result image on another image)
How can I make the edges transparent with Corel Photo Paint (or Corel Draw)?
As a service, I am setting up some photos that will be exported as png files for use in Publisher.
I need grungy photo edges to be transparent so her background shows through the grunge effect.
Thought I knew how to do this but it's not working.
Tips on reducing my JPG images in PSP X4 without loosing too much quality. I know that it isn't possible to not lose some picture quality but if you have any pointers that would be fantastic.
View 2 Replies View RelatedHow do I cleanup some of the edges around these images?
View 3 Replies View RelatedPaint Shop Pro X5.
I have some photos of old magazine covers, some of which weren't taken straight on, so that the covers aren't square. With previous versions of Paint Shop Pro, I could drag a corner out until it made the image look square [actually, rectangular], but I can't figure out how to do it with this version.
how to square up the edges of an image?
When I free transform and warp a layer to lie flat, sometimes I'll get this harsh pixellation at one end of the layer. It doesn't appear while I'm doing the warp, just suddenly coming up when I hit enter to apply the transformation.
So for example, Ill be transforming this grid, which is originally about 9x this big.So when I''m running the transformation/warp, it looks like this Not great, but at least most of the lines are still intact on the left and back (the right side is basically fine looking) But once I hit enter, I get this And now like, half the lines I did have are gone, and what's left is super pixelated.
Is there an interpolation setting I could be using? Is it something unavoidable from how distorted I make the layer?
Using X4 on Windows 7. I'm trying to create a series of custom edges to supplement those already supplied in X4. I've created the edge ok and exported it as a frame and it works ok. The problem is selecting it in the dropdown menu under Image/picture frames. Whereas the thumbnails of the supplied edges have grey shading to represent the transparent section of the edge, mine don't, they are just plain white and that makes it difficult to know what edge to select. What have I done wrong? I've opened a couple of the supplied edges and they look similar to mine ie no shading.
View 3 Replies View Relatedi have just downloaded a trial version of Paint Shop Pro X6 because I'm looking for a program that will go a good job on oval vignettes with soft (feathered) edges.
I can open the program and select a picture from my files. Through the videos I learned how to identify some of the PSP X6 tools. I click on the Ellipse tool on the lower left in the tool bar. Then it gets weird. Sometimes I'll make an ellipse on the photo and the ellipse outline stays there. Sometimes when I do this an oval is created. Every time an oval is created my picture is the background, and the part of the picture I want is white. It's like it's doing it backwards. I've seen the tutorials about selecting INVERT, but I've had no luck whatsoever with that.
This should be a very simple process, but I'm totally mystified how it works. I used to run a very simple program years ago that Microsoft put out called PictureIt. I really liked that program but it's outdated now and it won't work on the Windows 7 64 bit I'm using. I have tried several programs and Paint Shop Pro X6 seems to be the closest to Pictureit that I can find, but I'm expecting PSP X6 to be more advanced, precise, and better overall. In PictureIt I'd do the exact steps I just mentioned and the area I selected would be the oval picture, the rest was white, and then I feathered the edges. In PSP X6 it's mostly like that, but it's reversed. The picture I want is the background.
I have just started using the Paintshop Pro X4. In fact, I am still using the trial version and I want to use it so I can see if I want to buy it in a couple of weeks. However, I am not really very knowledgeable about computers, computer language and all the technical stuff. So things have to be pretty obvious to me.
Just for practice, I have downloaded a photo of a cherry and a leaf. Not great art, but a nice clear photograph. Of course I want it to be larger than the thumbnail image, so I have blown it up to 6"x6" Now the edge of the cherry, the leaf and the stem are all jagged. I know that is because of the pixels - but I still want to know how to get around it and smooth the edges when I enlarge something.
I have two photos, shooted probably the same day, by the same photograph in the same place !But the pose is a bit different.
first one is in high resolution and in black & white nuance. second one is a small resolution and in full colors. I wish re-color the black&white photo using exactly the same nuance from the colored one.
can i "copy" all the colors from the color-one to the b&w one ?
here are the photos :
the black and white to recolor [URL].......
the source color to use
In contrast to version PSPPX3, the new PSPX4 has implemented a tool that will remove all necessary keys and folders from your system. It works on all supported systems without problems.
follow the description below if you want to remove PSPX4 from your system.
How to remove PSPX4
Go to Start - Control Panel - Add and remove (XP) / Programs and Features (Vista, Windows 7) and remove PSPX4.
Restart the system if you want to reinstall it.
Additional note: No further action is required. Using other uninstall tools is neither good nor necessary.
I created a rectangular outline and fille the rectangle with a color. How do I remove the outline of the rectangle?
View 2 Replies View RelatedMy problem is My PSP X2 stopped working so I tried a repair all to no avail ..I then tried removing it via windows add and remove which it said it had done ..I then tried reinstalling it But a message came on the screen saying I already had PSP X2 installed on my computer still? I then used Revo unistaller program which found I still had it on my computer and which removed it (according to Revo) and again I tried to do a fresh install only to yet again get the message I had PSP X2 installed ..So somewhere in my computer PSP resides
View 2 Replies View RelatedIs it possible to remove a watermark from an image in PSPro X, if so how?
View 2 Replies View RelatedI have a picture of my self. I am clean shaven in the photo but you can see some stubble. what is the best way to remove the stubble?
View 2 Replies View Related4705.sample2.tifOur customers have given us some black and white .tif Monochrome Bitmap images at 400 ppi (see attached sample) and 600 ppi of some scanned black and white engineering drawings. Some of the small text on the drawings is not very legible because open areas are filled in with black. Some of the vertical and horizontal lines are ragged (digitized) on the edges. Is there any way that I can improve the visual quality of these Monochrome Bitmap images in Corel Draw (which I use) or Corel Paint (of which I'm not very knowledgeable, or adept)?
View 2 Replies View RelatedThe printer setting - I could never save it.For my label printer LP2844, every time I print, it defaults to Width=4.88 and Height=11.00 and some unprintable area settings. Every time I do my first printing, I have to change it (to 4"x6"). I have gone thru my Windows printer device setting (properties, preferences, advanced, etc) and I have removed the printer device, deleted and driver, reinstalled everything and it still does it.Then I try it on another PC. Same thing.Paint shop Pro X4 Pro V14.3.0.3 licensed version. I paid for it.It seems like Paint shop saves its own printer saving somewhere and I can't re-save it.
View 1 Replies View RelatedI am very new to corel paint and accidentally added a horrible texture to an image - how to remove the texture.
View 1 Replies View RelatedHow do I remove the ad nag window from Corel in PSP X2?
View 3 Replies View RelatedI'm trying to remove skin blemishes like acne but not sure what is PSP x4's equivalent to Adobe's cloning?
It's where you can select an area that you want to fix up and when u drag the mouse anywhere else around the face, it clones that skin over the selected skin blemish.
With PaintShop Pro x6, is there a way to remove text from a shirt in the image and get the entire shirt one solid color? The shirt in the photo is not flat, it is wavy.
View 8 Replies View RelatedIs there a tutorial on how to remove lens flare in PaintShop Pro X5? I have several images that have this issue, however I couldn't find any tutorials on google for PSP specifically.
View 2 Replies View RelatedIs there a Print Layout in X5 similar to that in Paint Shop Pro?
View 1 Replies View RelatedWhen you want to use skew on grayscale element you should be prepared for blue edges.
How blue can be similar to gray?
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
I have an issue with PSP X4; on load the program creates folders in the root of my network drive ( M: ) including:
[list=]
[*]Brushes
[*]Bump maps
[*]CMYK profiles
[*]Deformation maps
[*Displacement maps
[*]and so on...
[/list]
I have deleted these folders manually and they are recreated each time PSP launches. I have changed the settings in File -> Preferences -> File Locations to remove references to these folder locations, and then tried deleting them, but they are recreated again on load. how to remove them? They are littering my network drive...
How do I remove "Open with Corel Paintshop Pro X4" from the right click context menu in explorer? I have one for every version I have installed and it makes the right click menu toooo long.
View 2 Replies View Related