Maya Animation :: Controls Not Loading Into The Graph Editor?
Sep 23, 2013After animating, controls will not show up in the graph editor for fine tuning.
View 1 Replies
ADVERTISEMENT
Maya Animation :: HumanIK With Graph Editor?
May 30, 2013I am using HumanIK with Graph Editor to animate my character. First I create pose to pose and then I go to the Graph Editor to set the timing of the animation. In the Graph Editor I drag select multiple keys to get the timing correct. Then I go to the timeSlider and copy/paste keys to make some tweaking. And here we have the problem! When I copy key/keys all are good, but when I am going to paste key/keys Maya give me a fatal error!
Reproducible:
Make a default skeleton from the Character Controls menu and then make a Control Rig. Select HipsEffector set keys on frame 1, 12 and 24. Then in the Character Controls menu go to the Controls tap and left mouse click in the empty space next to the Character image to select all. Now open up the Graph Editor and select all the keys on frame 12 and with the Move Tool shift middle drag the keys to the right.
If you at this point go to the timeSlider and copy key frame 12 and paste it somewhere in the timeSlider Maya gets a fatal error pop up.
If the action shift middle drag with the Move Tool hasn't been used then Maya haven't popped up with the fatal error!
Maya :: Retiming Animation In Graph Editor
Jun 1, 2011I've got a problem with the graph editor in 2012 changing the values of my curves when I retime the curves. Basically, when I select all the controlers in my character rig, the go to move each set of keys over 2-3 frames, the curve values change. So the walk cycle essentially breaks, and my feet end up further in front, and the y trans value flattens out.
I've just installed hot fix 2, and that hasn't changed it. This has worked fine in every version of Maya i've used since version 3. Is it an 'new option' that i need to turn off I don't know about?
Maya Animation :: Graph Editor Horizontal Flipping
May 13, 2011I'm doing a walk cycle. and I have 2 feet. I have to manually switch in the numbers that result in a graph that is basically identical but with a horizontal and vertical flip.
instead of manually typing in the numbers I'd like to copy one set of keys and paste it onto the second foot. I know I can get a vertical flip by doing *=-1 but is there a way to get a horizontal flip also?
Maya Animation :: Add Multiple Keys In Graph Editor?
May 6, 2013I'd like to know if it is possible to add multiple keys on multiple curves in one step in graph editor as marked on attached image.
View 2 Replies View RelatedMaya Animation :: Spacing Key Frames In The Graph Editor
Nov 17, 2011I have a object divided to multiple parts, nearly 150, and when animating the rotation or any attribute I want some spacing between the keyframes, so that the second part starts moving after the first one by 5 frames, and it's about 150 objects, and i don' t want do it all manually, Is there any script or technique that could speed up my workflow.
View 4 Replies View RelatedMaya Animation :: Graph Editor - Perfect Scale?
Oct 5, 2011Say I have a series of keys, and I want to add exactly 1 or 2 spaces in between each key. is there a way to do that? rather than selecting chunks at a time and spacing them apart... like +=2 will move all the selected keys over 2 spaces all together. maybe theres a code that moves them with an offset?
View 2 Replies View RelatedMaya Animation :: Graph Editor Showing Only One Curve At A Time
Mar 5, 2012My Animation Graph Editor is only showing one animation curve (for one attribute) at a time after I have set multiple keyframes for the character set and various attributes. I select multiple attributes, and hit View-Frame All, and it only shows the top attribute of the selected attributes as one curve.
View 2 Replies View RelatedMaya Animation :: Trying To Move Bezier Handles In Graph Editor
Apr 4, 2011in C4D i can move the bezier to make the animation softer but in maya i can only move the point i click, try do middle mouse the bezier to move and i cant i know.
View 3 Replies View RelatedMaya Animation :: Cycle Path - Cycling U-Value Through Graph Editor
Feb 1, 2012I tried it by cycling U-value through graph editor, but not getting cycle.
View 3 Replies View RelatedMaya Animation :: Copying / Pasting Graph Editor Curves From A Scene To Another
Apr 10, 2011I have a hard time copying/pasting graph editor curves from a scene to another, since it`s only a specific part of the timeline, is there some basic rules that are to be observed for things to work properly? Yes after a thousand tries i`m going to have to edit every darn ecking curves accordingly to those i wanted to copy.
View 2 Replies View RelatedMaya Animation :: Copy Keyframes At One Point To Farther Down Timeline IN Graph Editor
Apr 7, 2011This is a pretty basic function in the Graph Editor.
All I want to do is copy some keyframes at one point to farther down the timeline IN the graph editor. Basically, select some keys, move to a new time and paste those same values. When I paste, all it does is add keys to the existing curve. I haven't used maya in awhile (2008 version), but I'm PRETTY sure this function was available. Why doesn't it work in 2011?
I've searched online, I've tried copying, moving to new time, create some keys, select them and then paste over them, but still doesn't work. And yeah, I know about the middle mouse button time slide trick, which is a workaround but doesn't work if you're copying multiple keys over time. I want to be able to do this BASIC function. What's the deal? On a Mac.
Maya Animation :: Hide Non-active Animation Layer F-curves In Graph
Apr 18, 2013My current scene has 10 animation layers for a character, and seeing every f-curve from all layers, although grey and locked, when I only need to see the f-curves in layer I'm working on is really cluttering the graph editor. My current work around is selecting my active layer in the Layer Editor every time I select a rig control. Simple enough, but a pretty inefficient way of working. I can't seem to find a setting that allows me to just see ONLY the fcurves in the active layer. I imagine some of you out there may have hundreds of animations for a single game character.
View 4 Replies View RelatedMaya :: Graph Editor Not Showing Attributes
Mar 20, 2012This happened recently. No matter what preferences I reset or options I click it wont show all the attributes. I go to the school, file is fine. I can see everything when I select control handles.
I uninstalled everything, cleaned registry. rebooted. reinstalled. Still have the problem. It should show all the attributes for translate and rotation. I tried the same file on different computers and it shows them all selected.
Maya :: Human IK Channel Box And Graph Editor
Aug 7, 2013I've been using Maya's HumanIK function for my model for a game I'm building. I began doing some animation, but I'm running into multiple problems. I've noticed for a while now that moving the IK handles with values from the channel box is a complete waste of time. It is unresponsive to the Channel Box numbers and how I can make it so it is. The only way to make the IKs move is to move or rotate them directly on the model with the basic manipulator tools.
Not only that, but did the animation, which for now is an idle breathing stance, between frames the animation moves on its own, beyond the scope of what I told it to move, even when its between two of the exact same frames. I haven't animated in a while, so I can't remember how I used to fix this, but since I know a bit more about animation now, I dabbled into my Graph Editor. Moving the curves have no effect on the animation either and I can't change the tangents nor use the smoothing handles.
The closest thing I found was something saying to change my Animation Settings in the Preferences to make the HIK curve default to Independent Euler-Angle curves, but that doesn't seem to work either.
Maya :: Tangents Not Showing In Graph Editor
May 11, 2011I have this scene with two characters, if i select a node (i.e. the hip control) and go to the graph editor it only shows one tangent. Even if i select a bunch of them in the left panel it only shows one! It seems like a bug to me because this file works fine in 2011.
I'm an Animation Mentor student and the staff have no clue of what's going on. They just advised me to stick with a working maya version for the moment, but maya 2011 is very slow for my computer.
Maya Animation :: HumanIK Zero Out Controls
Feb 10, 2012Just started looking at Mayas human IK rig system and initial thoughts are thats it looks quite good. Thats until I created the controls for the rig!
I've previously rigged many characters before (just basic rigs) from scratch and also used some of the free auto rigs thats are around on the net so I know the basic stuff but I'm no expert. But as any rigger will tell you its always best to keep you rig clean and tidy and all controls to be zeroed out at bindpose. This make things easy all round especially when animating.
So going back to creating the controls for the HumanIK when you look in the channel box there are values in some translates and rotates!
Maya Animation :: Adding Mesh Visibility Controls To A Rig?
Feb 23, 2012how I could go about adding visibility controls to select parts of a single skinned mesh?
I was watching Jeremy Ernst's rigging showreel [URL] and the mesh visibility controls are shown at 4:06..
Maya Animation :: Importing Rig - Skeleton Joints Appear And Hard To Click On Controls
Feb 7, 2014I'm looking to import a rig into a maya scene but every time I do the skeleton joints appear and it's hard to click on the controls. I have opened up the rig file and it's completely fine with no skeleton showing. Why is this happening?
View 4 Replies View RelatedMaya Animation :: Connection Editor Not Allowing Selection?
Apr 14, 2012I'm trying to connect. On the inputs, I'm loading the control curve, on the outputs, the cluster.
I'm trying to connect the translate values.
However, it doesn't allow me to select the input first. I can select the output first, but that puts the connection backwards.
I don't see why a control curve can't be connected to a cluster? Or is something wrong with my Connection Editor?
Maya Animation :: How To Re-open A Clip In Trax Editor
Feb 19, 2011how you can re-open a clip in the Trax editor so you can edit the original function curves?
View 2 Replies View RelatedMaya Animation :: Select Clips In Trax Editor To Turn Them Into Single Clip
Nov 2, 2011I've used Trax to create a number of animation clips for a character in a video game. I can create more complex animations by arranging several of these in the Trax editor and setting blends.
What I would like to know is: can I select several scheduled clips in the Trax editor and turn those into a single clip? Like if I had two walk cycles that blend into a jump, could I select those and create a single walk-then-jump clip which would appear in the visor, and which I could then drag into the Trax editor as a single unit?
Edge Animate CC :: Loading Symbol / Spinning Circle To Show Animation Is Loading?
Sep 13, 2013my animation takes around two seconds to load within my browser. Is there a way to display a loading symbol such as spinning circle, that will show the animation is loading, then disappear once it is ready to display?
View 2 Replies View RelatedMaya :: 2012 - Slow Update On Rig Controls?
Apr 20, 2011I just got Maya 2012 student edition. I created a quick rig with the default maya settings (Skeleton gen, Characterization tool, Character controls).
The position of the rig doesn't update until I let go of the controls. On other rigs the rig updates real time.
3ds Max Animation :: Facial Controls Not Updating Model
Jul 22, 2011why my facial control rig is not updating my character morph targets in real time? I would have to go into the modifier in order to see changes after clicking the slider. I used both the reaction manager method and the wired parameters but neither is working.
View 2 Replies View RelatedAutoDesk Smoke :: Accessing Large Animation Graph?
Aug 1, 2012In PR1 I was able to access a much larger Animation Graph - not sure how to do is in PR2
View 2 Replies View RelatedAutoDesk Smoke :: How To Set Animation Graph In Axis FX To Show Only Modified Parameters
Jul 16, 2012How do I set the animation graph in Axis FX to show only those parameters that have been modified ? Currently takes me a while to locate the parameters that I want to tweak.
View 5 Replies View RelatedMaya :: Hypershade Error / Line 631 / Designated Work Area Graph Tab Not Found
Sep 20, 2012I've just installed Maya 2013 and when i try to run hypershade i get this message: line 631: Designated Work Area graph tab not found!
View 1 Replies View RelatedPhotoshop Elements :: Editor Workspace Not Loading
Mar 8, 2013Elements editor workspace will not load.
View 2 Replies View RelatedMaya Animation :: Unlock The Scaling Attribute In Walk Cycle Animation File?
Feb 17, 2011I have rigged a character and made it into a character set in which i have locked the scaling attribute , I have then saved this file. I have then referenced this file and and have done a walk cycle animation and saved this file. I have then realised that I needed the scaling attribute when I have added other parts of my scene. Is there a way to unlock the scaling attribute in my walk cycle animation file or will i have to go back and change it in the rigged file, create a new character set and do the walk cycle animation again?
View 2 Replies View RelatedMaya Animation :: Setting Up A Rope For Animation Based On Control Panel
Jan 20, 2011I'm trying to animate a moving rope based on simulation data. I know how to import my motion data for individual objects.I've seen lots of tutorials where one uses simulations or soft bodies with IK in order to create a rope. how to use all these features and I want the rope to follow my coordinates exactly. I was hoping I could do something like the following:
1. create points in Maya which correspond to my data points
2. connect the points with a curve
3. loft a circle using the curve as a path in order to make a rope
4. move the points. due to History, the rope position is updated
Is there a way to do something like this in Maya? I've tried, and it looks like ep points do not have key-able channel data, so I can't create animations for them separately. I'm using .mov data file imports to generate x, y, and z motion keys for the points.