I'm looking to import a rig into a maya scene but every time I do the skeleton joints appear and it's hard to click on the controls. I have opened up the rig file and it's completely fine with no skeleton showing. Why is this happening?
View 4 RepliesI tried to join the skeleton with skin but I can not. I selected the entire group by outliner.
View 1 Replies View Relatedhow to create a skeleton for just a simple cylinder. I use the joint tool and create the joint in the end, in the middle, in the other end. I use the smooth bind to bind the skin with the skeleton, and then ik handle tool selecting the both end joints. But when i move the ik handle the object will not bend even though the skeleton is bending. I can only point the cylinder in the direction i want it.
View 1 Replies View RelatedI have 3+ Nurbs Circles that I have parented up in a hierarchy and now want to use them to create an IK chain.I can create a chain with a joint system, but can I create it with just my curves? I have tried using the IK handle tool and it requests that I LMB on the first joint and nothing happens.
View 3 Replies View RelatedHow can I smooth bind a mesh to the skeleton and have everything start out at 0. (so basically nothing gets moved by the skeleton.) So that I can add the weight wherever I want manually.
View 3 Replies View RelatedI'm having tons of trouble with the hair system for a character I've made. One that I'm very stumped on is for the rigging. I have a skull cap with hair on it and then the character separate. I have created a skeleton with which I want to smooth bind to the skin. While the smooth bind seems to be working, I'm having issues with the hair not following the global skeleton when I move it. The character herself moves, but her hair stays put and I don't know where to go from here to make her hair follow. I have tried combining the skull cap and character. I have tried grouping the skull cap and character. I have tried just about everything, but the hair will not follow. The most I could do was make the follicles and skull cap move, but not the hair. Any way to get the hair constraints to move along with the hair system after it has been binded, that would be great too as I have used hair constraints to form her hairstyle.
View 2 Replies View RelatedIs it possible to make an object, say a NurbsSphere to always be on top of the geometry in the viewport, like x-ray on joints. That way, I could use a small sphere in say the Elbow as a controller, and it could be inside the mesh but not hidden. Much like what you see here:
[URL].......
Is that really not possible?
I see a lot of skeletons that people created with handles on them so you can manipulate your joints easier (Like arrows and nurb circles etc.) Is there a good tutorial that can show me how to make handles for my joints?
View 2 Replies View RelatedHow to create a Human IK control rig from a pre-made skeleton? I have matched the hierarchy and naming conventions of the pre-made skeleton to the that of the Human IK Skeleton Generator, but I keep getting an error that says, "Invalid skeleton or no skeleton. Can't create new rig."
Can even gotten the Create Rig function to work? If so, how did you set up your skeleton?
i have a model, bound to a skeleton, which is all green-lit in the character controls window. however, when i create a control rig for it, maya creates a new skeleton which the rig controls (working fine) but that is not attached to the original skeleton. what do i need to do to get them linked or to get the auto-rig to manipulate the skeleton that is bound to the geometry already? see attached image as how i can move the bones in the maya created skeleton and its IK, but it doesnt affect the originals (ignore the custom rig panel, that was just me trying another approach to bind the default control rig to a previously made rig that does work)
View 8 Replies View RelatedI picked up two characters that I had working just fine about 3 years ago. Somehow, when I imported them into the same file, the skins came unbound. Annoying, but not insurmountable--rebind and weight painting took a couple hours. However, while the controls move the joints and deform the skins, the global move controls do not move the characters. It seems like the main mass of the bodies are stuck in place.
View 1 Replies View RelatedI just rigged a model of mine and even added controls to certain parts of it. The problem is that I do not know how to bind the joints to the model. Every time I attempt it I get an error message. What is the best way to attach a joint with controls to a model?
View 3 Replies View RelatedI'm using Maya 2011 and I'm noticing, there are transform nodes in the outliner hierarchy for my skeleton. Should these be deleted? Some of them delete cleanly and some of them delete taking the bone with them. ???
View 2 Replies View RelatedI am having issues with rigging a simple character in Maya 2013. I was able to set up the joints and the skeleton but when I move the joints to start animating, the model moves separatly from the skeleton. It seems to be moving in the same direction but exponentially more than the skeleton, creating separation between the model and the skeleton. I am new to rigging and was going off the tutorial and am stuck at this point.
View 2 Replies View RelatedI have set rotation limits on all of my joints in a rig. But when I move the Ik handle, the joints all rotate in however they want.
What can I do to make it so that when I move the IK handle, the joints are constrained to their individual limits?
is it possible to transfer rigged joints to another model without causing problems
View 1 Replies View RelatedI've been trying to feel out the pipeline for creating HIK rigs and jumping back and forth between Maya and Motion Builder. In Mobu, there is a way to add prop joints to a character's definition, but I haven't found a way to do so in Maya.
What I have done, is created the joints as necessary, and then created custom controls that the prop joints are constrained to. It's a simple parent constraint, so nothing too tricky. However, when I go to File-> Send to Motion Builder, the joints that are constrained are offset from their proper positions by a distance similar to their offset from the origin of the scene. The only way to get them back, is to turn off the effects of the parent constraints.
The controllers, and constraints transferred into Mobu fine, it seems. So I'm not sure where the discrepancy is. It would be ideal to be able to add these joints into the characterization step in Maya, to simply move them about with FK controls. What the best way to set this up would be? Is there a way to add prop definitions to a character in Maya?
While the original question remains, I found that the prop controls I had in my scene, were off from their proper positions, by the exact relative amount from the origin in the maya scene. Even though I froze transformations on the controls, coming into Mobu, they were put back on somehow. After selecting them, and setting their trans values to 0,0,0, they were put back into the correct position.
Trying to animate a rigged model for a class project but I'm running into problems. If I, for example, pick the joint at the top of the hierarchy, in the main view it appears as though everything gets selected. When I try to set a keyframe for the whole model, though, it only gets set on the actual joint I picked, none of the ones below it.
I looked at things via Outliner and see the same problem: I pick a joint there but the ones below it show as unselected in the Outliner window. Right now it appears the only way I can select multiple joints to set a keyframe on them all is to manually expand the tree in Outliner and then explicitly pick each one with command-click or shift-click. If I select an un-expanded joint section in the tree the hidden joints do not get selected, and if I expand the tree and pick a root node the ones below it are not selected.
I have tried this on three different models, including one I rigged myself, and the same behavior is present across all three.
Is this normal behavior for Maya animation? Is there some configuration setting that will change this so I can select an entire skeleton tree via the root node and have all of them accept a keyframe?
I'm running Maya 2011 for the Mac, on OS X Lion, with service pack 1 installed.
I can only make joints for Maya muscle on the default grid, they seem to snap on grid.
View 1 Replies View RelatedI want to rig a face for animating. (not for a game). and I can't figure out which is better and why: having all joints, and those joints driving parts of the face.. or just making blend shapes for all expressions like smile, angry, sad etc....
I know blend shapes won't work for games, but I'm planning to do mmo's anyways so I'll never need a complicated joint setup for faces... but as far as film, what works better?
Just started looking at Mayas human IK rig system and initial thoughts are thats it looks quite good. Thats until I created the controls for the rig!
I've previously rigged many characters before (just basic rigs) from scratch and also used some of the free auto rigs thats are around on the net so I know the basic stuff but I'm no expert. But as any rigger will tell you its always best to keep you rig clean and tidy and all controls to be zeroed out at bindpose. This make things easy all round especially when animating.
So going back to creating the controls for the HumanIK when you look in the channel box there are values in some translates and rotates!
After animating, controls will not show up in the graph editor for fine tuning.
View 1 Replies View Relatedhow I could go about adding visibility controls to select parts of a single skinned mesh?
I was watching Jeremy Ernst's rigging showreel [URL] and the mesh visibility controls are shown at 4:06..
I'm just trying to learn the very basics of making a simple character. When I paint on any polygon shape, the same paint stroke is painted on all the polygon shapes of my character. What i've noticed though is if I separate the polygon meshes I can paint on them separately, but then that makes it impossible for me to bind the skeleton of the character to the skin.
View 1 Replies View RelatedI am animating a skeleton. As a result, I'm not using physique-- I'm just connecting different mesh objects to different bones in the biped, and I'm good to go.
Here's my issue: I don't want my biped inside my mesh. I want to stick it off to the side somewhere where it's not interfering with my actual mesh, and I can do my links easily by just dragging over to them.
Naturally, when I do this, things rotate around the biped's pivot point rather than where I want them.
Is there any way to offset the biped-- just for interaction, and visually? I just want it outside of my mesh so I can animate the biped without having to look at it all merged up with my mesh.
Skin modifer, skelleton has moved outside the mesh.
I flick the light on and off on skin modifier, when its off the skelleton fits the model perfectly and when it,s on the hand and arm has been liftet outside the skel.
I recently began using Unity at work, exporting from Maya does not allow me to keep Blend Shapes or Deformers (not even by doing a Geometry Cache, Unity does not read any of that) and wanted to test out how to make a facial rig using joints in case I ever need one.I have seen demos using 3D Studio Max and I see the gist of it is to create a round joint hierarchy around the mouth and eye, mimicking the edge flow. The place where I got stuck is when I saw a NURBS controller in Max move a parent joint without affecting the children joints. I know how to move a parent joint without affecting its children (press Insert) but not how to set a constrain to do the same in Maya. If I use a parent constrain or direct parenting moving the parent joint drags all the children along.
How can I get a constrain to affect only the parent joint and not its children?
Is there a way to switch off the animation when creating joints in the assembly environment.
View 2 Replies View RelatedI just got Maya 2012 student edition. I created a quick rig with the default maya settings (Skeleton gen, Characterization tool, Character controls).
The position of the rig doesn't update until I let go of the controls. On other rigs the rig updates real time.
I am trying to setup a a system that allows me to rotate Point 1 and 2 joints to place downstream spheres into specific locations such that the distance and angles between the spheres don't change.
Everything works the way I want (so far), but Sphere04 goes the opposite direction of its IK chain.
What am I doing wrong?
Daveikexample.zip
why my facial control rig is not updating my character morph targets in real time? I would have to go into the modifier in order to see changes after clicking the slider. I used both the reaction manager method and the wired parameters but neither is working.
View 2 Replies View Related