How to create a Human IK control rig from a pre-made skeleton? I have matched the hierarchy and naming conventions of the pre-made skeleton to the that of the Human IK Skeleton Generator, but I keep getting an error that says, "Invalid skeleton or no skeleton. Can't create new rig."
Can even gotten the Create Rig function to work? If so, how did you set up your skeleton?
imagine you have a HumanIK character and a vehicle like motorbike or similar, and you want the character to drive the vehicle. Ok then: Parent the reference node (your_character_name:Reference) into your vehicle root. Ok, works fine but now you need to constrain or parent the control of the hands to the handlebar. With maya constrains not work fine and don't know why.
How i do? i need to create a Auxiliary Node in the Character Controls?
i have a model, bound to a skeleton, which is all green-lit in the character controls window. however, when i create a control rig for it, maya creates a new skeleton which the rig controls (working fine) but that is not attached to the original skeleton. what do i need to do to get them linked or to get the auto-rig to manipulate the skeleton that is bound to the geometry already? see attached image as how i can move the bones in the maya created skeleton and its IK, but it doesnt affect the originals (ignore the custom rig panel, that was just me trying another approach to bind the default control rig to a previously made rig that does work)
View 8 Replies View Relatedhow to create a skeleton for just a simple cylinder. I use the joint tool and create the joint in the end, in the middle, in the other end. I use the smooth bind to bind the skin with the skeleton, and then ik handle tool selecting the both end joints. But when i move the ik handle the object will not bend even though the skeleton is bending. I can only point the cylinder in the direction i want it.
View 1 Replies View RelatedI tried to join the skeleton with skin but I can not. I selected the entire group by outliner.
View 1 Replies View RelatedHow can I smooth bind a mesh to the skeleton and have everything start out at 0. (so basically nothing gets moved by the skeleton.) So that I can add the weight wherever I want manually.
View 3 Replies View RelatedI'm having tons of trouble with the hair system for a character I've made. One that I'm very stumped on is for the rigging. I have a skull cap with hair on it and then the character separate. I have created a skeleton with which I want to smooth bind to the skin. While the smooth bind seems to be working, I'm having issues with the hair not following the global skeleton when I move it. The character herself moves, but her hair stays put and I don't know where to go from here to make her hair follow. I have tried combining the skull cap and character. I have tried grouping the skull cap and character. I have tried just about everything, but the hair will not follow. The most I could do was make the follicles and skull cap move, but not the hair. Any way to get the hair constraints to move along with the hair system after it has been binded, that would be great too as I have used hair constraints to form her hairstyle.
View 2 Replies View RelatedI'm making preparations to rig a quadruped (toad character) and am wondering if it could be done using Maya 2013's Human IK system.
View 1 Replies View RelatedI'm using Maya 2011 and I'm noticing, there are transform nodes in the outliner hierarchy for my skeleton. Should these be deleted? Some of them delete cleanly and some of them delete taking the bone with them. ???
View 2 Replies View RelatedI am having issues with rigging a simple character in Maya 2013. I was able to set up the joints and the skeleton but when I move the joints to start animating, the model moves separatly from the skeleton. It seems to be moving in the same direction but exponentially more than the skeleton, creating separation between the model and the skeleton. I am new to rigging and was going off the tutorial and am stuck at this point.
View 2 Replies View RelatedI'm looking to import a rig into a maya scene but every time I do the skeleton joints appear and it's hard to click on the controls. I have opened up the rig file and it's completely fine with no skeleton showing. Why is this happening?
View 4 Replies View RelatedI am having trouble with setting rotation to other then linear for the IK Controls, the FKs work fine. Is this some limitation, or option that I am missing ? Also, the keys are displayed as diamonds instead of the usual squares, so I guess there is some lock which I cannot find.
View 1 Replies View RelatedI'm trying to animate a moving rope based on simulation data. I know how to import my motion data for individual objects.I've seen lots of tutorials where one uses simulations or soft bodies with IK in order to create a rope. how to use all these features and I want the rope to follow my coordinates exactly. I was hoping I could do something like the following:
1. create points in Maya which correspond to my data points
2. connect the points with a curve
3. loft a circle using the curve as a path in order to make a rope
4. move the points. due to History, the rope position is updated
Is there a way to do something like this in Maya? I've tried, and it looks like ep points do not have key-able channel data, so I can't create animations for them separately. I'm using .mov data file imports to generate x, y, and z motion keys for the points.
I suffer a problem that my arm (rigged with humanIK , Maya 2013) can only bend a little angle but can`t bend anymore.
View 1 Replies View Relatedi am a 3ds max user but had to switch to maya for this project. I am trying to make the ctrl pivot axis to follow the bone axis but I dont know how to do it in Maya.
View 1 Replies View RelatedI have made a custom rig, mapped it to HIK and got a set of perfectly working controlers. I have used them to animate by hand before without problem but now I have a skeleton from mocap data that I want to use instead.
So I go back to an older save of my project and import the file that I want to get the animation from. Then I make this new skeleton the source and everything looks good. My model is moving just like the mocap skeleton. Great. Since I need to tweak it somewhat and don't want to loose my controls, I then bake the animation to the control rig. This is where things go weird.
If I bake to every frame, all is well. That would make it a living hell to edit later on though so I only want something like every fifth frame. But if I bake only every fifth frame, the animation gets super twitchy in between some of the frames. And I don't see any trace of those movements in the graph editor.
[URL]
couple of days ago i finished rigging, positionned my character in a nice pose for a render then closed maya. Foward a couple of days, now when i move my rig the character is not following it, he stays in the same pose as he was like if he was frozen.
View 5 Replies View Relatedimagine you have a HumanIK character and a vehicle like motorbike or similar, and you want the character to drive the vehicle. Ok then: Parent the reference node (your_character_name:Reference) into your vehicle root. Ok, works fine but now you need to constrain or parent the control of the hands to the handlebar.With maya constrains not work fine and don’t know why.
i need to create a Auxiliary Node in the Character Controls?I’m trying with Parent Constrain, Orient, Aim.. and don’t work properly: Position (tx,ty,tz) work’s fine but X-axis of rotations are inverted… when turn the handlebar to left, rotation turn to right.i trying with offsets or any parameter in the constrain but nothing..
I set up my file. I set my controls to where I want them. The Control Curves are in position. I save. Everything is going well.When I reopen the file, control curves have spontaneously moved. Without permission.I've done several experiments with different results, but the same problem: the control curve of my rig are moved from where I had them when I saved the file.
View 2 Replies View RelatedI am working on (yet another) minecraft character rig xD
So i have set up a facial control panel, using blend shapes and driven keys, but i need it to follow my character. If i parent it to the head, i doesn't follow when i grab the skeleton and move the character around, and if i bind it to the neck joint, i am not able to use the control panel, because the movement of the controls are locked, since they're binded to a joint.
[URL]
1. Windows/Animation Editors/HumanIK/Skeleton Generator - Generate Skeleton
2. Create control rig for it.
3. Set keys to rotate shoulder down and back.
Keys are linear by default and cannot be changed, except to "stepped". Clicking Spline, Auto, etc. Doesn't change anything. Works fine on translation curves. URL....I accidentally check the "force FIK curves to linear" button? It's totally killing our animation pipeline.
how to create a vacuum sucking animation?
What I need to do is suck little strands of something I made into/thru a hollow a needle.
When setting up a simple FK control curve on say the wrist for example, many times the control curve isn't exactly perpendicular to the local rotation axis of the joint movement, so when we position the control curve to be perpendicular to the joint - it has a rotational value added, but the rotational handles are lines up with the rotational handles of the joint that we want to move.
Freeze Transformations: then the control curves rotational handle go back to being skewed (out of alignment with the joints)
We want to Freeze transformations before constraining the curve, but we'd really to keep those rotations control handles to remain aligned with the joints rotational handles. This will make it an exact control when animating - grab the rotational handle of the curve, rotate it, and the joint will move exactly in the proper direction.
how to get the rotational handle of any control curve to run perpendicular to the shape after freezing transformations?
I'm just trying to learn the very basics of making a simple character. When I paint on any polygon shape, the same paint stroke is painted on all the polygon shapes of my character. What i've noticed though is if I separate the polygon meshes I can paint on them separately, but then that makes it impossible for me to bind the skeleton of the character to the skin.
View 1 Replies View RelatedI am animating a skeleton. As a result, I'm not using physique-- I'm just connecting different mesh objects to different bones in the biped, and I'm good to go.
Here's my issue: I don't want my biped inside my mesh. I want to stick it off to the side somewhere where it's not interfering with my actual mesh, and I can do my links easily by just dragging over to them.
Naturally, when I do this, things rotate around the biped's pivot point rather than where I want them.
Is there any way to offset the biped-- just for interaction, and visually? I just want it outside of my mesh so I can animate the biped without having to look at it all merged up with my mesh.
Skin modifer, skelleton has moved outside the mesh.
I flick the light on and off on skin modifier, when its off the skelleton fits the model perfectly and when it,s on the hand and arm has been liftet outside the skel.
I've been getting my hands on a few models from different games (Such as the Spy from 'Team Fortress 2', and Mario from 'Super Smash Brothers Brawl') lately, all of which are already weighted properly... So I can simply apply IK's and begin animating in a matter of minutes...
However, I can't set up any of them with a HIK rig (To use with Motion Capture..).. I keep getting an "Invalid skeleton or no skeleton. Can't create new rig." error when trying to Create the HIK Rig (I can Characterize the skeleton with no problem though). I know that the mesh is binded already to the skeleton using skin clusters..
I've been using Maya's HumanIK function for my model for a game I'm building. I began doing some animation, but I'm running into multiple problems. I've noticed for a while now that moving the IK handles with values from the channel box is a complete waste of time. It is unresponsive to the Channel Box numbers and how I can make it so it is. The only way to make the IKs move is to move or rotate them directly on the model with the basic manipulator tools.
Not only that, but did the animation, which for now is an idle breathing stance, between frames the animation moves on its own, beyond the scope of what I told it to move, even when its between two of the exact same frames. I haven't animated in a while, so I can't remember how I used to fix this, but since I know a bit more about animation now, I dabbled into my Graph Editor. Moving the curves have no effect on the animation either and I can't change the tangents nor use the smoothing handles.
The closest thing I found was something saying to change my Animation Settings in the Preferences to make the HIK curve default to Independent Euler-Angle curves, but that doesn't seem to work either.
I have a question about the ikHandle. When I create the ikHandle with the ikSCSolver, the handle is “L” shaped. Does the direction the lower portion of the “L” points towards, indicate the first axis of rotation order? Or does it mean something else?
View 1 Replies View RelatedSo I was in the midst of making blend-shapes for an animated wizards staff, but one leaf wouldn't deform like the rest.
I know I selected the vertices properly when altering it, but every time I try to create a blend shape deformer I get the error "Error:// no deformable object selected.
Why it would be non-deformable?
To create an animation similar to the one shown in the page 225, in the tutorial, I created a curve but I am not too sure that was the correct way to create it.
1. Selected the Surfaces Menu.
2. In the font view, using the CV Curve Tool, created the first half.
3. Using Duplicate in the Edit Menu, I created the other half.
4. In the Edit Curves Menu, selected Attach Curves and connected two curves.
5. I, then selected the Animation Menu and created an object to be used as an aircraft and followed the same steps shown in the tutorial and it worked nicely.