I picked up two characters that I had working just fine about 3 years ago. Somehow, when I imported them into the same file, the skins came unbound. Annoying, but not insurmountable--rebind and weight painting took a couple hours. However, while the controls move the joints and deform the skins, the global move controls do not move the characters. It seems like the main mass of the bodies are stuck in place.
View 1 RepliesI have 3+ Nurbs Circles that I have parented up in a hierarchy and now want to use them to create an IK chain.I can create a chain with a joint system, but can I create it with just my curves? I have tried using the IK handle tool and it requests that I LMB on the first joint and nothing happens.
View 3 Replies View RelatedIs it possible to make an object, say a NurbsSphere to always be on top of the geometry in the viewport, like x-ray on joints. That way, I could use a small sphere in say the Elbow as a controller, and it could be inside the mesh but not hidden. Much like what you see here:
[URL].......
Is that really not possible?
I see a lot of skeletons that people created with handles on them so you can manipulate your joints easier (Like arrows and nurb circles etc.) Is there a good tutorial that can show me how to make handles for my joints?
View 2 Replies View RelatedI just rigged a model of mine and even added controls to certain parts of it. The problem is that I do not know how to bind the joints to the model. Every time I attempt it I get an error message. What is the best way to attach a joint with controls to a model?
View 3 Replies View RelatedI have set rotation limits on all of my joints in a rig. But when I move the Ik handle, the joints all rotate in however they want.
What can I do to make it so that when I move the IK handle, the joints are constrained to their individual limits?
is it possible to transfer rigged joints to another model without causing problems
View 1 Replies View RelatedI've been trying to feel out the pipeline for creating HIK rigs and jumping back and forth between Maya and Motion Builder. In Mobu, there is a way to add prop joints to a character's definition, but I haven't found a way to do so in Maya.
What I have done, is created the joints as necessary, and then created custom controls that the prop joints are constrained to. It's a simple parent constraint, so nothing too tricky. However, when I go to File-> Send to Motion Builder, the joints that are constrained are offset from their proper positions by a distance similar to their offset from the origin of the scene. The only way to get them back, is to turn off the effects of the parent constraints.
The controllers, and constraints transferred into Mobu fine, it seems. So I'm not sure where the discrepancy is. It would be ideal to be able to add these joints into the characterization step in Maya, to simply move them about with FK controls. What the best way to set this up would be? Is there a way to add prop definitions to a character in Maya?
While the original question remains, I found that the prop controls I had in my scene, were off from their proper positions, by the exact relative amount from the origin in the maya scene. Even though I froze transformations on the controls, coming into Mobu, they were put back on somehow. After selecting them, and setting their trans values to 0,0,0, they were put back into the correct position.
Trying to animate a rigged model for a class project but I'm running into problems. If I, for example, pick the joint at the top of the hierarchy, in the main view it appears as though everything gets selected. When I try to set a keyframe for the whole model, though, it only gets set on the actual joint I picked, none of the ones below it.
I looked at things via Outliner and see the same problem: I pick a joint there but the ones below it show as unselected in the Outliner window. Right now it appears the only way I can select multiple joints to set a keyframe on them all is to manually expand the tree in Outliner and then explicitly pick each one with command-click or shift-click. If I select an un-expanded joint section in the tree the hidden joints do not get selected, and if I expand the tree and pick a root node the ones below it are not selected.
I have tried this on three different models, including one I rigged myself, and the same behavior is present across all three.
Is this normal behavior for Maya animation? Is there some configuration setting that will change this so I can select an entire skeleton tree via the root node and have all of them accept a keyframe?
I'm running Maya 2011 for the Mac, on OS X Lion, with service pack 1 installed.
I can only make joints for Maya muscle on the default grid, they seem to snap on grid.
View 1 Replies View RelatedI want to rig a face for animating. (not for a game). and I can't figure out which is better and why: having all joints, and those joints driving parts of the face.. or just making blend shapes for all expressions like smile, angry, sad etc....
I know blend shapes won't work for games, but I'm planning to do mmo's anyways so I'll never need a complicated joint setup for faces... but as far as film, what works better?
I'm looking to import a rig into a maya scene but every time I do the skeleton joints appear and it's hard to click on the controls. I have opened up the rig file and it's completely fine with no skeleton showing. Why is this happening?
View 4 Replies View Relatedwe are 3 students planing a short animated Film for university, the character will be modeled in the next week and we are planning the rigs right now. We thought one guy is doing the Facial Rigging and another Guy the Body Rigging. Is it possible to combine the weight maps etc to get a perfectly working solution?
System:
AMD x6 3.2Ghz
16gb Ram
Nvida GTX 460SE
I'm rigging my first character in Maya 2011 using Advanced Skeleton.
It has a hard shell breast plate, so I'm a bit worried about how to keep the body from penetrating the shell.
Any tips for a neophyte when using Advanced Skeleton - or any issues that are obvious when using my model?
Also, I'm going to be applying some motion capture in Motion Builder as well as animating by hand, so ... any comments
BTW - another thing I'm worried about is getting the non t-pose character rigged. This is how the artist gave it to me, and I know that MotionBuilder wants a t-pose. Hopefully, I can rig it in AdvancedSkeleton - and use that to get to a t-pose. But ... I'm not exactly sure of the best way?
I am having issues with rigging a simple character in Maya 2013. I was able to set up the joints and the skeleton but when I move the joints to start animating, the model moves separatly from the skeleton. It seems to be moving in the same direction but exponentially more than the skeleton, creating separation between the model and the skeleton. I am new to rigging and was going off the tutorial and am stuck at this point.
View 2 Replies View RelatedI recently began using Unity at work, exporting from Maya does not allow me to keep Blend Shapes or Deformers (not even by doing a Geometry Cache, Unity does not read any of that) and wanted to test out how to make a facial rig using joints in case I ever need one.I have seen demos using 3D Studio Max and I see the gist of it is to create a round joint hierarchy around the mouth and eye, mimicking the edge flow. The place where I got stuck is when I saw a NURBS controller in Max move a parent joint without affecting the children joints. I know how to move a parent joint without affecting its children (press Insert) but not how to set a constrain to do the same in Maya. If I use a parent constrain or direct parenting moving the parent joint drags all the children along.
How can I get a constrain to affect only the parent joint and not its children?
Is there a way to switch off the animation when creating joints in the assembly environment.
View 2 Replies View RelatedI am trying to setup a a system that allows me to rotate Point 1 and 2 joints to place downstream spheres into specific locations such that the distance and angles between the spheres don't change.
Everything works the way I want (so far), but Sphere04 goes the opposite direction of its IK chain.
What am I doing wrong?
Daveikexample.zip
I am trying out Maya 2012 and when i select faces or vertices and try to move on individually, the whole model move. I don't need that, i just need to move the face or vertice alone not the whole image. Also is there any way to download tutorial and installing it into Maya 2012. where i am working with Maya 2012 don't have internet to browse right away.
View 5 Replies View RelatedSo, when I reset the transforms of an object, it moves the geometry back to the frozen position but the pivot point gets places at the world origin.
That can't possibly be what is supposed to happen, is it?
I have modeled a face and body of a character separately. I want to join both of them but the border edges are not the same . so whats the method to join both of them together .
View 2 Replies View RelatedI have rigged a character and made it into a character set in which i have locked the scaling attribute , I have then saved this file. I have then referenced this file and and have done a walk cycle animation and saved this file. I have then realised that I needed the scaling attribute when I have added other parts of my scene. Is there a way to unlock the scaling attribute in my walk cycle animation file or will i have to go back and change it in the rigged file, create a new character set and do the walk cycle animation again?
View 2 Replies View RelatedMy current scene has 10 animation layers for a character, and seeing every f-curve from all layers, although grey and locked, when I only need to see the f-curves in layer I'm working on is really cluttering the graph editor. My current work around is selecting my active layer in the Layer Editor every time I select a rig control. Simple enough, but a pretty inefficient way of working. I can't seem to find a setting that allows me to just see ONLY the fcurves in the active layer. I imagine some of you out there may have hundreds of animations for a single game character.
View 4 Replies View RelatedI'm trying to animate a moving rope based on simulation data. I know how to import my motion data for individual objects.I've seen lots of tutorials where one uses simulations or soft bodies with IK in order to create a rope. how to use all these features and I want the rope to follow my coordinates exactly. I was hoping I could do something like the following:
1. create points in Maya which correspond to my data points
2. connect the points with a curve
3. loft a circle using the curve as a path in order to make a rope
4. move the points. due to History, the rope position is updated
Is there a way to do something like this in Maya? I've tried, and it looks like ep points do not have key-able channel data, so I can't create animations for them separately. I'm using .mov data file imports to generate x, y, and z motion keys for the points.
I have an assignment for a class where part of the final project is detailing the construction of a mold for a part. The animation that I would like to do would show the build up of the part in a 3D printer layer by layer. The closest method of animating this that I can think of is unfortunately backwards.
As I would have the part and a camera facing up from the bottom of the part and would have a plane that would recede upwards in the y direction. This would reveal the part as the plane translates in the y direction.
This might be okay, but the problem is that I would like to show this from a camera on top facing down instead of a camera on bottom facing up. How I can create the look of a part being built up in this additive method?
I am trying to add an expression to the standard Mudbox car to make the wheels turn when the vehicle moves in both the X & Z dimension. I have found many scripts that let me do this in a single dimension. I have found some others that claim to work for both dimensions, but at certain angles the wheels turn in the wrong direction.
My work flow is as follows:
1 - Export car from Mudbox to Maya
2 - Separate the wheels & center pivot all items
3 - Add NurbsCurves to create a rig
4 - Parenting the elements of the car
5 - Add an expression based on this web post [URL].......
6 - Test the animation
It works great when translating the car in the Z axis, but when the car is rotated 95 degrees in the Y axis the wheel will only go backwards no matter which direction the car is moved.
I have attached an MB (Maya 2013) so you can see the
problem.mudboxcar_maya_2plusexpression.mb.zip
translate facial motion capturing data (basically 2d point clouds) to blendshape weights. I finished rigging my character and wanted to drive my blendshapes by the relative position of my tracking data, e.g. distance between corners of the mouth drive the "wide" blendshape and so on...
Hope YOU know a solution for this, I believe blendshapes are THE way to create realism in tracked animation but I was not able to find ANY reference to something like that. I'd like it to be customizable and not to expensive, so the imagemetrics faceware service won't do for me
How come baking some part of animation in graph editor deletes everything before and after the part i bake and how can i bake that part while leaving the rest untouched?
View 2 Replies View RelatedI have a character with animation. Another character is the same(same bones, meshes), but with no animation, 100 times larger in size and I resize the head to make the head looks slimmer. They are saved in different fbx files and I imported them into mb scenes. I select the root bone and "select hierarchy", the export options is shown below. Then select in the same way in the larger character's scene, the importer options is shown below. THE PROBLEM is: after I import the atom, the character becomes shrinked to the same size as the former one and the ratio of head becomes the same as the former one too.
View 1 Replies View RelatedFor some scenes we have a chain which is wrapped around several cogs, just like a bicycle. In this scenario we need the chain links to follow the path and retain their relationship to each other.
In other scenes we have a chain which follows along a changing path. Imagine this if you can: A heavy weight has a chain attached which goes vertically up, over a pulley and down the other side where it is attached to a lorry. The lorry drives off pulling the weight upwards. This is my challenge!
Should I individually constrain the links using a Pin constraint and use dynamics completely to keep the chain taught?
Was wondering if there is a way of getting random camera movements? For example, i am doing a fly through of an earthquake scene and as the camera animates along the street it randomly shakes with the earthquake shocks.
I know I could animate it by hand but I wondered if there was a way (perhaps an expression) to make it more simple?