Maya Animation :: HumanIK With Graph Editor?
May 30, 2013
I am using HumanIK with Graph Editor to animate my character. First I create pose to pose and then I go to the Graph Editor to set the timing of the animation. In the Graph Editor I drag select multiple keys to get the timing correct. Then I go to the timeSlider and copy/paste keys to make some tweaking. And here we have the problem! When I copy key/keys all are good, but when I am going to paste key/keys Maya give me a fatal error!
Reproducible:
Make a default skeleton from the Character Controls menu and then make a Control Rig. Select HipsEffector set keys on frame 1, 12 and 24. Then in the Character Controls menu go to the Controls tap and left mouse click in the empty space next to the Character image to select all. Now open up the Graph Editor and select all the keys on frame 12 and with the Move Tool shift middle drag the keys to the right.
If you at this point go to the timeSlider and copy key frame 12 and paste it somewhere in the timeSlider Maya gets a fatal error pop up.
If the action shift middle drag with the Move Tool hasn't been used then Maya haven't popped up with the fatal error!
View 1 Replies
ADVERTISEMENT
Jun 1, 2011
I've got a problem with the graph editor in 2012 changing the values of my curves when I retime the curves. Basically, when I select all the controlers in my character rig, the go to move each set of keys over 2-3 frames, the curve values change. So the walk cycle essentially breaks, and my feet end up further in front, and the y trans value flattens out.
I've just installed hot fix 2, and that hasn't changed it. This has worked fine in every version of Maya i've used since version 3. Is it an 'new option' that i need to turn off I don't know about?
View 9 Replies
View Related
May 13, 2011
I'm doing a walk cycle. and I have 2 feet. I have to manually switch in the numbers that result in a graph that is basically identical but with a horizontal and vertical flip.
instead of manually typing in the numbers I'd like to copy one set of keys and paste it onto the second foot. I know I can get a vertical flip by doing *=-1 but is there a way to get a horizontal flip also?
View 2 Replies
View Related
May 6, 2013
I'd like to know if it is possible to add multiple keys on multiple curves in one step in graph editor as marked on attached image.
View 2 Replies
View Related
Nov 17, 2011
I have a object divided to multiple parts, nearly 150, and when animating the rotation or any attribute I want some spacing between the keyframes, so that the second part starts moving after the first one by 5 frames, and it's about 150 objects, and i don' t want do it all manually, Is there any script or technique that could speed up my workflow.
View 4 Replies
View Related
Sep 23, 2013
After animating, controls will not show up in the graph editor for fine tuning.
View 1 Replies
View Related
Oct 5, 2011
Say I have a series of keys, and I want to add exactly 1 or 2 spaces in between each key. is there a way to do that? rather than selecting chunks at a time and spacing them apart... like +=2 will move all the selected keys over 2 spaces all together. maybe theres a code that moves them with an offset?
View 2 Replies
View Related
Mar 5, 2012
My Animation Graph Editor is only showing one animation curve (for one attribute) at a time after I have set multiple keyframes for the character set and various attributes. I select multiple attributes, and hit View-Frame All, and it only shows the top attribute of the selected attributes as one curve.
View 2 Replies
View Related
Apr 4, 2011
in C4D i can move the bezier to make the animation softer but in maya i can only move the point i click, try do middle mouse the bezier to move and i cant i know.
View 3 Replies
View Related
Feb 1, 2012
I tried it by cycling U-value through graph editor, but not getting cycle.
View 3 Replies
View Related
Apr 10, 2011
I have a hard time copying/pasting graph editor curves from a scene to another, since it`s only a specific part of the timeline, is there some basic rules that are to be observed for things to work properly? Yes after a thousand tries i`m going to have to edit every darn ecking curves accordingly to those i wanted to copy.
View 2 Replies
View Related
Apr 7, 2011
This is a pretty basic function in the Graph Editor.
All I want to do is copy some keyframes at one point to farther down the timeline IN the graph editor. Basically, select some keys, move to a new time and paste those same values. When I paste, all it does is add keys to the existing curve. I haven't used maya in awhile (2008 version), but I'm PRETTY sure this function was available. Why doesn't it work in 2011?
I've searched online, I've tried copying, moving to new time, create some keys, select them and then paste over them, but still doesn't work. And yeah, I know about the middle mouse button time slide trick, which is a workaround but doesn't work if you're copying multiple keys over time. I want to be able to do this BASIC function. What's the deal? On a Mac.
View 1 Replies
View Related
Feb 10, 2012
Just started looking at Mayas human IK rig system and initial thoughts are thats it looks quite good. Thats until I created the controls for the rig!
I've previously rigged many characters before (just basic rigs) from scratch and also used some of the free auto rigs thats are around on the net so I know the basic stuff but I'm no expert. But as any rigger will tell you its always best to keep you rig clean and tidy and all controls to be zeroed out at bindpose. This make things easy all round especially when animating.
So going back to creating the controls for the HumanIK when you look in the channel box there are values in some translates and rotates!
View 2 Replies
View Related
Jun 28, 2013
I suffer a problem that my arm (rigged with humanIK , Maya 2013) can only bend a little angle but can`t bend anymore.
View 1 Replies
View Related
Oct 16, 2012
Putting a motion tracking data on a cartoon like character rig?
View 1 Replies
View Related
Oct 13, 2012
Custom rig to work with the HumanIK system in Maya 2013. Im currently trying to map my custom skeleton and get the mocap data to retarget but the skeleton freaks out when I try to change the source.
View 2 Replies
View Related
Dec 6, 2011
imagine you have a HumanIK character and a vehicle like motorbike or similar, and you want the character to drive the vehicle. Ok then: Parent the reference node (your_character_name:Reference) into your vehicle root. Ok, works fine but now you need to constrain or parent the control of the hands to the handlebar.With maya constrains not work fine and don’t know why.
i need to create a Auxiliary Node in the Character Controls?I’m trying with Parent Constrain, Orient, Aim.. and don’t work properly: Position (tx,ty,tz) work’s fine but X-axis of rotations are inverted… when turn the handlebar to left, rotation turn to right.i trying with offsets or any parameter in the constrain but nothing..
View 3 Replies
View Related
Sep 1, 2013
i have a model, bound to a skeleton, which is all green-lit in the character controls window. however, when i create a control rig for it, maya creates a new skeleton which the rig controls (working fine) but that is not attached to the original skeleton. what do i need to do to get them linked or to get the auto-rig to manipulate the skeleton that is bound to the geometry already? see attached image as how i can move the bones in the maya created skeleton and its IK, but it doesnt affect the originals (ignore the custom rig panel, that was just me trying another approach to bind the default control rig to a previously made rig that does work)
View 8 Replies
View Related
Jun 17, 2013
I am trying to rig a HumanIK character so that both of his hands will stay attached to an object (gun, sword, bat, golf club, etc.). I can get the object parented to one of the hands and it follows along as expected, but cannot for the life of me figure out how to get the other hand to automatically stay attached to the object or follow it.
I've tried parent, point, orientation, etc., constraints using locators, the IK effector itself (wrist) and a few other things. It seems the HumanIK programming keeps a firm hold on the effectors and won't let anything other than the software drive them.
My HumanIK rig is properly setup and its definition locked. Using Maya 2013.
View 4 Replies
View Related
Apr 18, 2013
My current scene has 10 animation layers for a character, and seeing every f-curve from all layers, although grey and locked, when I only need to see the f-curves in layer I'm working on is really cluttering the graph editor. My current work around is selecting my active layer in the Layer Editor every time I select a rig control. Simple enough, but a pretty inefficient way of working. I can't seem to find a setting that allows me to just see ONLY the fcurves in the active layer. I imagine some of you out there may have hundreds of animations for a single game character.
View 4 Replies
View Related
Mar 20, 2012
This happened recently. No matter what preferences I reset or options I click it wont show all the attributes. I go to the school, file is fine. I can see everything when I select control handles.
I uninstalled everything, cleaned registry. rebooted. reinstalled. Still have the problem. It should show all the attributes for translate and rotation. I tried the same file on different computers and it shows them all selected.
View 1 Replies
View Related
Aug 7, 2013
I've been using Maya's HumanIK function for my model for a game I'm building. I began doing some animation, but I'm running into multiple problems. I've noticed for a while now that moving the IK handles with values from the channel box is a complete waste of time. It is unresponsive to the Channel Box numbers and how I can make it so it is. The only way to make the IKs move is to move or rotate them directly on the model with the basic manipulator tools.
Not only that, but did the animation, which for now is an idle breathing stance, between frames the animation moves on its own, beyond the scope of what I told it to move, even when its between two of the exact same frames. I haven't animated in a while, so I can't remember how I used to fix this, but since I know a bit more about animation now, I dabbled into my Graph Editor. Moving the curves have no effect on the animation either and I can't change the tangents nor use the smoothing handles.
The closest thing I found was something saying to change my Animation Settings in the Preferences to make the HIK curve default to Independent Euler-Angle curves, but that doesn't seem to work either.
View 1 Replies
View Related
May 11, 2011
I have this scene with two characters, if i select a node (i.e. the hip control) and go to the graph editor it only shows one tangent. Even if i select a bunch of them in the left panel it only shows one! It seems like a bug to me because this file works fine in 2011.
I'm an Animation Mentor student and the staff have no clue of what's going on. They just advised me to stick with a working maya version for the moment, but maya 2011 is very slow for my computer.
View 9 Replies
View Related
Apr 14, 2012
I'm trying to connect. On the inputs, I'm loading the control curve, on the outputs, the cluster.
I'm trying to connect the translate values.
However, it doesn't allow me to select the input first. I can select the output first, but that puts the connection backwards.
I don't see why a control curve can't be connected to a cluster? Or is something wrong with my Connection Editor?
View 1 Replies
View Related
Feb 19, 2011
how you can re-open a clip in the Trax editor so you can edit the original function curves?
View 2 Replies
View Related
Oct 28, 2011
i had custom rigs with a character set to store our animations in clips. now i want to do the same with the new humanIK rig. the documentation is not very big on this. it just covers the retarget workflow.which nodes do i have to include in my character sets, so i can store my animations in one file?(retargeted and classic hand animated) or is there any documentation i overlooked on this?
View 1 Replies
View Related
Nov 2, 2011
I've used Trax to create a number of animation clips for a character in a video game. I can create more complex animations by arranging several of these in the Trax editor and setting blends.
What I would like to know is: can I select several scheduled clips in the Trax editor and turn those into a single clip? Like if I had two walk cycles that blend into a jump, could I select those and create a single walk-then-jump clip which would appear in the visor, and which I could then drag into the Trax editor as a single unit?
View 1 Replies
View Related
Aug 1, 2012
In PR1 I was able to access a much larger Animation Graph - not sure how to do is in PR2
View 2 Replies
View Related
Jul 16, 2012
How do I set the animation graph in Axis FX to show only those parameters that have been modified ? Currently takes me a while to locate the parameters that I want to tweak.
View 5 Replies
View Related
Sep 20, 2012
I've just installed Maya 2013 and when i try to run hypershade i get this message: line 631: Designated Work Area graph tab not found!
View 1 Replies
View Related
Feb 17, 2011
I have rigged a character and made it into a character set in which i have locked the scaling attribute , I have then saved this file. I have then referenced this file and and have done a walk cycle animation and saved this file. I have then realised that I needed the scaling attribute when I have added other parts of my scene. Is there a way to unlock the scaling attribute in my walk cycle animation file or will i have to go back and change it in the rigged file, create a new character set and do the walk cycle animation again?
View 2 Replies
View Related