This happened recently. No matter what preferences I reset or options I click it wont show all the attributes. I go to the school, file is fine. I can see everything when I select control handles.
I uninstalled everything, cleaned registry. rebooted. reinstalled. Still have the problem. It should show all the attributes for translate and rotation. I tried the same file on different computers and it shows them all selected.
I have this scene with two characters, if i select a node (i.e. the hip control) and go to the graph editor it only shows one tangent. Even if i select a bunch of them in the left panel it only shows one! It seems like a bug to me because this file works fine in 2011.
I'm an Animation Mentor student and the staff have no clue of what's going on. They just advised me to stick with a working maya version for the moment, but maya 2011 is very slow for my computer.
My Animation Graph Editor is only showing one animation curve (for one attribute) at a time after I have set multiple keyframes for the character set and various attributes. I select multiple attributes, and hit View-Frame All, and it only shows the top attribute of the selected attributes as one curve.
View 2 Replies View RelatedI am using HumanIK with Graph Editor to animate my character. First I create pose to pose and then I go to the Graph Editor to set the timing of the animation. In the Graph Editor I drag select multiple keys to get the timing correct. Then I go to the timeSlider and copy/paste keys to make some tweaking. And here we have the problem! When I copy key/keys all are good, but when I am going to paste key/keys Maya give me a fatal error!
Reproducible:
Make a default skeleton from the Character Controls menu and then make a Control Rig. Select HipsEffector set keys on frame 1, 12 and 24. Then in the Character Controls menu go to the Controls tap and left mouse click in the empty space next to the Character image to select all. Now open up the Graph Editor and select all the keys on frame 12 and with the Move Tool shift middle drag the keys to the right.
If you at this point go to the timeSlider and copy key frame 12 and paste it somewhere in the timeSlider Maya gets a fatal error pop up.
If the action shift middle drag with the Move Tool hasn't been used then Maya haven't popped up with the fatal error!
I've been using Maya's HumanIK function for my model for a game I'm building. I began doing some animation, but I'm running into multiple problems. I've noticed for a while now that moving the IK handles with values from the channel box is a complete waste of time. It is unresponsive to the Channel Box numbers and how I can make it so it is. The only way to make the IKs move is to move or rotate them directly on the model with the basic manipulator tools.
Not only that, but did the animation, which for now is an idle breathing stance, between frames the animation moves on its own, beyond the scope of what I told it to move, even when its between two of the exact same frames. I haven't animated in a while, so I can't remember how I used to fix this, but since I know a bit more about animation now, I dabbled into my Graph Editor. Moving the curves have no effect on the animation either and I can't change the tangents nor use the smoothing handles.
The closest thing I found was something saying to change my Animation Settings in the Preferences to make the HIK curve default to Independent Euler-Angle curves, but that doesn't seem to work either.
I've got a problem with the graph editor in 2012 changing the values of my curves when I retime the curves. Basically, when I select all the controlers in my character rig, the go to move each set of keys over 2-3 frames, the curve values change. So the walk cycle essentially breaks, and my feet end up further in front, and the y trans value flattens out.
I've just installed hot fix 2, and that hasn't changed it. This has worked fine in every version of Maya i've used since version 3. Is it an 'new option' that i need to turn off I don't know about?
I'm doing a walk cycle. and I have 2 feet. I have to manually switch in the numbers that result in a graph that is basically identical but with a horizontal and vertical flip.
instead of manually typing in the numbers I'd like to copy one set of keys and paste it onto the second foot. I know I can get a vertical flip by doing *=-1 but is there a way to get a horizontal flip also?
I'd like to know if it is possible to add multiple keys on multiple curves in one step in graph editor as marked on attached image.
View 2 Replies View RelatedI have a object divided to multiple parts, nearly 150, and when animating the rotation or any attribute I want some spacing between the keyframes, so that the second part starts moving after the first one by 5 frames, and it's about 150 objects, and i don' t want do it all manually, Is there any script or technique that could speed up my workflow.
View 4 Replies View RelatedAfter animating, controls will not show up in the graph editor for fine tuning.
View 1 Replies View RelatedSay I have a series of keys, and I want to add exactly 1 or 2 spaces in between each key. is there a way to do that? rather than selecting chunks at a time and spacing them apart... like +=2 will move all the selected keys over 2 spaces all together. maybe theres a code that moves them with an offset?
View 2 Replies View Relatedin C4D i can move the bezier to make the animation softer but in maya i can only move the point i click, try do middle mouse the bezier to move and i cant i know.
View 3 Replies View RelatedI tried it by cycling U-value through graph editor, but not getting cycle.
View 3 Replies View RelatedI have a hard time copying/pasting graph editor curves from a scene to another, since it`s only a specific part of the timeline, is there some basic rules that are to be observed for things to work properly? Yes after a thousand tries i`m going to have to edit every darn ecking curves accordingly to those i wanted to copy.
View 2 Replies View RelatedThis is a pretty basic function in the Graph Editor.
All I want to do is copy some keyframes at one point to farther down the timeline IN the graph editor. Basically, select some keys, move to a new time and paste those same values. When I paste, all it does is add keys to the existing curve. I haven't used maya in awhile (2008 version), but I'm PRETTY sure this function was available. Why doesn't it work in 2011?
I've searched online, I've tried copying, moving to new time, create some keys, select them and then paste over them, but still doesn't work. And yeah, I know about the middle mouse button time slide trick, which is a workaround but doesn't work if you're copying multiple keys over time. I want to be able to do this BASIC function. What's the deal? On a Mac.
I've just installed Maya 2013 and when i try to run hypershade i get this message: line 631: Designated Work Area graph tab not found!
View 1 Replies View RelatedIllustrator can make graphs with lines and bars / columns, for example from the docs: [URL] .....
However, when I create a graph like this, I seem to lose the ability to manually set the value axis using "override calculated values".
To reproduce this problem: Create a graph like the example, with bars and an axis on the left, lines and an axis on the right. Unlike the example, don't fix the numbers so the lines match up neatly - have one side go up to just under 20, one up to just under 250, so there are mismatched markers and numbers of divisions on each side.Try to make the markers and numbers of divisions match up, so the side that goes up to 20 actually goes up to 25 and has the same number of divisions as the other side.Everything I've tried doesn't work:
If I select the whole graph and go to 'Graph Type', I can't set Value Axis options. In earlier versions it's greyed out, in CS6 I can access it but clicking 'Okay' does nothing.If I select the whole graph and chose one graph type, I can set the Value Axis options, but that selected graph type then applies to the whole chart,If I use the Group Selection tool to select one of the series, and open 'Graph Type' options, changing the Value Axis options has no effectIf I use the Group Selection tool to select all series that share an axis and open 'Graph Type' options, changing the Value Axis options still has no effectIf I use the Group Selection tool to select the axis ticks group itself, or the axis line and axis ticks groups themselves, or the axis labels, axis line and axis ticks, or the axis labels, axis line, axis ticks and associated data series, etc, changing the Value Axis options also has no effect
It seems like this feature is broken and it seems like the example in the manual was carefully chosen to use a rare combination of numbers where it would actually look right.
When I insert new data on an existing graph (for example, just adding a new year of data) and press insert, it just deletes the graph entirely. My only option is to recreate the entire graph which is frustrating because I lose its format and colors.
View 4 Replies View RelatedI have a column graph. I want the data values to display in the columns. How do I do that? Here's what I have now:
I want the values 270018, 283148, etc. to display in the graph. Is that possible?
I'm totally new to Illustrator and want to use the line graph tool to insert a graph that passes through 0,0 and runs to 24,24. I want the x and y axes to meet at the origin. As it isn't working as you can see. I've used 0, 0 and 24, 24 as my data points. Is there any way I can change how this is presented so it's clear that it's at the origin?
I'm using CS6, if that matters.
I have been making a title box for my drawing layout and have been using attributes. all my attributes open in the 'Enhanced Attributes Editor'. But for my Scale option, i was wondering if there was any way of creating a drop down list in the enhanced attributes editor instead of typing the value in each time?
View 9 Replies View RelatedMy current scene has 10 animation layers for a character, and seeing every f-curve from all layers, although grey and locked, when I only need to see the f-curves in layer I'm working on is really cluttering the graph editor. My current work around is selecting my active layer in the Layer Editor every time I select a rig control. Simple enough, but a pretty inefficient way of working. I can't seem to find a setting that allows me to just see ONLY the fcurves in the active layer. I imagine some of you out there may have hundreds of animations for a single game character.
View 4 Replies View RelatedI was given a customers title block but there are no defined attributes. I'm using AutoCad Electrical 2010. I have to double click on the title block and the edit block definition box pops up. I select the block to edit and click ok. I would like to use the enhanced attribute editor on these title blocks. Is there a way to define the attributes on this kind of title block using the enhanced attribute editor?
View 9 Replies View RelatedMaterials do not show-up in either Iray or Mental ray Compact Material Editor mode.
View 4 Replies View RelatedThis is what my material editor looks like:[URL]
I can't get the globes to show. Am I missing something, or is it some kind of faulty installation issue?
I have made a custom attribute roller for the shoulders on my robot.So he can turn left and right I have set -
-90 = -90 Degrees
90 = 90 Degrees
and 0 keyed in the center (to allow the set driven keys to be set)
However, when i go from left to right or vice versa in the animating stage the attribute eases into 0 (from -90) and eases back out again on the way to 90. I have used Linear Tangents in the graph editor but this has no effect.
I just installed LT2013 and migratet my settings from LT2008.
Doubleclicking on a blok openes the block editor in LT2008, but not in LT2013.
In LT2008, the main cui file was acadlt.cui. And in this file the "block - double click" action was specified. And it worked in LT2008. I have my own cui-file which not contains any doubleclick-actions.
In LT2013, after migration from LT2008, the mail cui file is now my own cui-file (which not contains any doubleclick actions). Is this why it doesnt work ?
I have tryed to copy a doubleclickaction from acadlt.cui to "my own cui-file". And now it works.
Is this because "my " cui file now is the main cui file ? Why is "my" cui file the main cui file after migration ? is there a way to change, so acadlt.cui becomes the main cui file ?
If not, is there a way to transfer alle settings from acadlt.cui to "my" cui file ? I know i can do this one action of a time in "transfer".
I've set keyframes on the Glow Intensity attribute of an object so I can slowly reduce the intensity at certain points. Now I need to create a new expression to give a random flickering to the glowing object as the scene plays, until the glow finally dims out.
But when I select Glow Intensity and try to create the Expression, there is no option now to 'Create New Expression'. The other options are still there, but it seems that at the top I'm left with an option relating to the Animation Curve Attributes (animCurveTU..?)
Is there no way to add a rand() expression to give some flickering to the Glow Intensity if I also have a few keyframes set that slowly dim the overall intensity level? Surely not.
I've tried to manually create the expression in the Expression Editor, but when I have to type in the name of the attribute, it hangs the whole program and I have to kill Maya and restart. Either it will not work that way or I'm missing something.
Maybe another way get the flickering short of manually keyframing the intensity level for the entire sequence.
This is probably just me not being up to speed yet, but once I combine a set of polygons, is there an easy way to still change the attributes of the original individual objects?
Prior to combining them, each object appears in the Outliner individually and I can select it there and change its attributes...color, etc. But I need to lock them together to keep their relative positions, and combining them does that perfectly. But afterward, the individual list in the Outliner doesn't seem to work anymore...the 'polysurface1' that was created has all the attributes crammed together, and having to scroll through all the tabs is a pain in the neck. Isn't there some way to combine objects and still readily change the colors or other attributes of the separate parts? Or, as I originally wondered about, is there an easier way to hold them in position without combining them?
I dont know how to animate the attributes of a fire ball i have made..
I read you can right click on teh fade and set the Key but i get no option to set keey when right click.
I wanna make the fader animate a left to right move to change the colour.
I'm having a problem with Maya 2011. It does not open the Shelf Editor. All the other editors work fine.
View 4 Replies View Related