I have a object divided to multiple parts, nearly 150, and when animating the rotation or any attribute I want some spacing between the keyframes, so that the second part starts moving after the first one by 5 frames, and it's about 150 objects, and i don' t want do it all manually, Is there any script or technique that could speed up my workflow.
View 4 RepliesI am using HumanIK with Graph Editor to animate my character. First I create pose to pose and then I go to the Graph Editor to set the timing of the animation. In the Graph Editor I drag select multiple keys to get the timing correct. Then I go to the timeSlider and copy/paste keys to make some tweaking. And here we have the problem! When I copy key/keys all are good, but when I am going to paste key/keys Maya give me a fatal error!
Reproducible:
Make a default skeleton from the Character Controls menu and then make a Control Rig. Select HipsEffector set keys on frame 1, 12 and 24. Then in the Character Controls menu go to the Controls tap and left mouse click in the empty space next to the Character image to select all. Now open up the Graph Editor and select all the keys on frame 12 and with the Move Tool shift middle drag the keys to the right.
If you at this point go to the timeSlider and copy key frame 12 and paste it somewhere in the timeSlider Maya gets a fatal error pop up.
If the action shift middle drag with the Move Tool hasn't been used then Maya haven't popped up with the fatal error!
I've got a problem with the graph editor in 2012 changing the values of my curves when I retime the curves. Basically, when I select all the controlers in my character rig, the go to move each set of keys over 2-3 frames, the curve values change. So the walk cycle essentially breaks, and my feet end up further in front, and the y trans value flattens out.
I've just installed hot fix 2, and that hasn't changed it. This has worked fine in every version of Maya i've used since version 3. Is it an 'new option' that i need to turn off I don't know about?
I'm doing a walk cycle. and I have 2 feet. I have to manually switch in the numbers that result in a graph that is basically identical but with a horizontal and vertical flip.
instead of manually typing in the numbers I'd like to copy one set of keys and paste it onto the second foot. I know I can get a vertical flip by doing *=-1 but is there a way to get a horizontal flip also?
I'd like to know if it is possible to add multiple keys on multiple curves in one step in graph editor as marked on attached image.
View 2 Replies View RelatedAfter animating, controls will not show up in the graph editor for fine tuning.
View 1 Replies View RelatedSay I have a series of keys, and I want to add exactly 1 or 2 spaces in between each key. is there a way to do that? rather than selecting chunks at a time and spacing them apart... like +=2 will move all the selected keys over 2 spaces all together. maybe theres a code that moves them with an offset?
View 2 Replies View RelatedMy Animation Graph Editor is only showing one animation curve (for one attribute) at a time after I have set multiple keyframes for the character set and various attributes. I select multiple attributes, and hit View-Frame All, and it only shows the top attribute of the selected attributes as one curve.
View 2 Replies View Relatedin C4D i can move the bezier to make the animation softer but in maya i can only move the point i click, try do middle mouse the bezier to move and i cant i know.
View 3 Replies View RelatedI tried it by cycling U-value through graph editor, but not getting cycle.
View 3 Replies View RelatedI have a hard time copying/pasting graph editor curves from a scene to another, since it`s only a specific part of the timeline, is there some basic rules that are to be observed for things to work properly? Yes after a thousand tries i`m going to have to edit every darn ecking curves accordingly to those i wanted to copy.
View 2 Replies View RelatedThis is a pretty basic function in the Graph Editor.
All I want to do is copy some keyframes at one point to farther down the timeline IN the graph editor. Basically, select some keys, move to a new time and paste those same values. When I paste, all it does is add keys to the existing curve. I haven't used maya in awhile (2008 version), but I'm PRETTY sure this function was available. Why doesn't it work in 2011?
I've searched online, I've tried copying, moving to new time, create some keys, select them and then paste over them, but still doesn't work. And yeah, I know about the middle mouse button time slide trick, which is a workaround but doesn't work if you're copying multiple keys over time. I want to be able to do this BASIC function. What's the deal? On a Mac.
My current scene has 10 animation layers for a character, and seeing every f-curve from all layers, although grey and locked, when I only need to see the f-curves in layer I'm working on is really cluttering the graph editor. My current work around is selecting my active layer in the Layer Editor every time I select a rig control. Simple enough, but a pretty inefficient way of working. I can't seem to find a setting that allows me to just see ONLY the fcurves in the active layer. I imagine some of you out there may have hundreds of animations for a single game character.
View 4 Replies View RelatedThis happened recently. No matter what preferences I reset or options I click it wont show all the attributes. I go to the school, file is fine. I can see everything when I select control handles.
I uninstalled everything, cleaned registry. rebooted. reinstalled. Still have the problem. It should show all the attributes for translate and rotation. I tried the same file on different computers and it shows them all selected.
I've been using Maya's HumanIK function for my model for a game I'm building. I began doing some animation, but I'm running into multiple problems. I've noticed for a while now that moving the IK handles with values from the channel box is a complete waste of time. It is unresponsive to the Channel Box numbers and how I can make it so it is. The only way to make the IKs move is to move or rotate them directly on the model with the basic manipulator tools.
Not only that, but did the animation, which for now is an idle breathing stance, between frames the animation moves on its own, beyond the scope of what I told it to move, even when its between two of the exact same frames. I haven't animated in a while, so I can't remember how I used to fix this, but since I know a bit more about animation now, I dabbled into my Graph Editor. Moving the curves have no effect on the animation either and I can't change the tangents nor use the smoothing handles.
The closest thing I found was something saying to change my Animation Settings in the Preferences to make the HIK curve default to Independent Euler-Angle curves, but that doesn't seem to work either.
I have this scene with two characters, if i select a node (i.e. the hip control) and go to the graph editor it only shows one tangent. Even if i select a bunch of them in the left panel it only shows one! It seems like a bug to me because this file works fine in 2011.
I'm an Animation Mentor student and the staff have no clue of what's going on. They just advised me to stick with a working maya version for the moment, but maya 2011 is very slow for my computer.
When I key the arm on frame 1 for instance, then key the hip they both appear on the same frame, meaning if I copy the arm to frame 20, it copies the hip too.Or if I want to adjust the arm on frame 10 it also adjusts the hip (and all the other frames in the scene.)Making it practically impossible to tween anything at all because it's all lumped together.
I deleted my entire walk cycle and started over again, reset the options to default, reloaded Maya... and it's still happening but only in this scene.
I have problem with Render setting window. I made an animation 240 frames and when I try to set the frame range it does´t want accept 240 and stays alway on 10. Start frame 1 - End frame 10, no more. I also try to change the frame/animations ext but it won´t accept multi frame neither.
View 5 Replies View RelatedI've been having this issue with Maya's timelines since my first usage of 2010 (on Windows) and now 2011 on Mac. The problem is an odd one, My keys start to show up "between" two frames in my timeline. This makes selecting and moving, and judging timeline distances super difficult. If I open up the graph editor, I get the same results.
I'm running Maya 2011 x64 Educational SP1 on Snow Leopard 10.6.8 on an 2009 iMac. I'm not sure this has any bearing on what is happening in my timeline, as I've had similar results on a Windows machine a few years ago.
I've been working on this scene for a few weeks now, and only recently did this start happening, near the end of the timeline in the scene. I am working at 24fps REALTIME, which is necessary for the project. I have also tried scaling the timeline up and won, but I get no relief from the problem.
there is a way to mark certain frames or certain regions of the maya timeline with labels.
Basically I want to be able to set a label at certain keyframes so that I can export this information for use in a third-party tool.
I'm trying to connect. On the inputs, I'm loading the control curve, on the outputs, the cluster.
I'm trying to connect the translate values.
However, it doesn't allow me to select the input first. I can select the output first, but that puts the connection backwards.
I don't see why a control curve can't be connected to a cluster? Or is something wrong with my Connection Editor?
how you can re-open a clip in the Trax editor so you can edit the original function curves?
View 2 Replies View RelatedI've used Trax to create a number of animation clips for a character in a video game. I can create more complex animations by arranging several of these in the Trax editor and setting blends.
What I would like to know is: can I select several scheduled clips in the Trax editor and turn those into a single clip? Like if I had two walk cycles that blend into a jump, could I select those and create a single walk-then-jump clip which would appear in the visor, and which I could then drag into the Trax editor as a single unit?
Any way to preserve spaces between text boxes or frames, in other words if i designed a template consist of two text boxes the space between the first and the second box is 9.77 mm then i removed some text from the first text box (auto fitting to content) so the height of the first text box will decrease and the space between the two text boxes (9.77 mm) will increase, what i want to do is to fix this space so if any text box decreased in height the other text box lefted up or down to fix this space (9.77 mm).
View 5 Replies View RelatedIn PR1 I was able to access a much larger Animation Graph - not sure how to do is in PR2
View 2 Replies View RelatedHow do I set the animation graph in Axis FX to show only those parameters that have been modified ? Currently takes me a while to locate the parameters that I want to tweak.
View 5 Replies View RelatedI've just installed Maya 2013 and when i try to run hypershade i get this message: line 631: Designated Work Area graph tab not found!
View 1 Replies View RelatedI have rigged a character and made it into a character set in which i have locked the scaling attribute , I have then saved this file. I have then referenced this file and and have done a walk cycle animation and saved this file. I have then realised that I needed the scaling attribute when I have added other parts of my scene. Is there a way to unlock the scaling attribute in my walk cycle animation file or will i have to go back and change it in the rigged file, create a new character set and do the walk cycle animation again?
View 2 Replies View RelatedI'm trying to animate a moving rope based on simulation data. I know how to import my motion data for individual objects.I've seen lots of tutorials where one uses simulations or soft bodies with IK in order to create a rope. how to use all these features and I want the rope to follow my coordinates exactly. I was hoping I could do something like the following:
1. create points in Maya which correspond to my data points
2. connect the points with a curve
3. loft a circle using the curve as a path in order to make a rope
4. move the points. due to History, the rope position is updated
Is there a way to do something like this in Maya? I've tried, and it looks like ep points do not have key-able channel data, so I can't create animations for them separately. I'm using .mov data file imports to generate x, y, and z motion keys for the points.
I have an assignment for a class where part of the final project is detailing the construction of a mold for a part. The animation that I would like to do would show the build up of the part in a 3D printer layer by layer. The closest method of animating this that I can think of is unfortunately backwards.
As I would have the part and a camera facing up from the bottom of the part and would have a plane that would recede upwards in the y direction. This would reveal the part as the plane translates in the y direction.
This might be okay, but the problem is that I would like to show this from a camera on top facing down instead of a camera on bottom facing up. How I can create the look of a part being built up in this additive method?
Illustrator can make graphs with lines and bars / columns, for example from the docs: [URL] .....
However, when I create a graph like this, I seem to lose the ability to manually set the value axis using "override calculated values".
To reproduce this problem: Create a graph like the example, with bars and an axis on the left, lines and an axis on the right. Unlike the example, don't fix the numbers so the lines match up neatly - have one side go up to just under 20, one up to just under 250, so there are mismatched markers and numbers of divisions on each side.Try to make the markers and numbers of divisions match up, so the side that goes up to 20 actually goes up to 25 and has the same number of divisions as the other side.Everything I've tried doesn't work:
If I select the whole graph and go to 'Graph Type', I can't set Value Axis options. In earlier versions it's greyed out, in CS6 I can access it but clicking 'Okay' does nothing.If I select the whole graph and chose one graph type, I can set the Value Axis options, but that selected graph type then applies to the whole chart,If I use the Group Selection tool to select one of the series, and open 'Graph Type' options, changing the Value Axis options has no effectIf I use the Group Selection tool to select all series that share an axis and open 'Graph Type' options, changing the Value Axis options still has no effectIf I use the Group Selection tool to select the axis ticks group itself, or the axis line and axis ticks groups themselves, or the axis labels, axis line and axis ticks, or the axis labels, axis line, axis ticks and associated data series, etc, changing the Value Axis options also has no effect
It seems like this feature is broken and it seems like the example in the manual was carefully chosen to use a rare combination of numbers where it would actually look right.