Maya Animation :: Keys Show Up Between Frames?
Jul 8, 2011
I've been having this issue with Maya's timelines since my first usage of 2010 (on Windows) and now 2011 on Mac. The problem is an odd one, My keys start to show up "between" two frames in my timeline. This makes selecting and moving, and judging timeline distances super difficult. If I open up the graph editor, I get the same results.
I'm running Maya 2011 x64 Educational SP1 on Snow Leopard 10.6.8 on an 2009 iMac. I'm not sure this has any bearing on what is happening in my timeline, as I've had similar results on a Windows machine a few years ago.
I've been working on this scene for a few weeks now, and only recently did this start happening, near the end of the timeline in the scene. I am working at 24fps REALTIME, which is necessary for the project. I have also tried scaling the timeline up and won, but I get no relief from the problem.
View 2 Replies
ADVERTISEMENT
Feb 4, 2014
When I key the arm on frame 1 for instance, then key the hip they both appear on the same frame, meaning if I copy the arm to frame 20, it copies the hip too.Or if I want to adjust the arm on frame 10 it also adjusts the hip (and all the other frames in the scene.)Making it practically impossible to tween anything at all because it's all lumped together.
I deleted my entire walk cycle and started over again, reset the options to default, reloaded Maya... and it's still happening but only in this scene.
View 1 Replies
View Related
Sep 15, 2011
I made a stupid mistake and started lip-syncing a long piece of animation at 25 FPS instead of 24 which I need to use. I just set it to 24 and it put all of my keys on frames like 10.68 or 54.22, it has become really frustrating to animate with. I was wondering if there's some way to snap these keyframes to solid keys instead of having them on decimals, I don't care if the animation is slightly off, I can fix it later.
View 2 Replies
View Related
Apr 16, 2012
I don't remember how to copy keys on the timeline by dragging MMB.
I tried Shift + S, Ctrl + S and is not working. What is the keyboard shortcuts ?
View 2 Replies
View Related
Dec 13, 2011
How to copy and paste keys? Can I do it in the timeline or graph editor, how?
View 1 Replies
View Related
May 6, 2013
I'd like to know if it is possible to add multiple keys on multiple curves in one step in graph editor as marked on attached image.
View 2 Replies
View Related
Nov 8, 2013
I am currently working on a game and am pretty new to the world of Maya ( 2D animator gone rogue!), I have some animation that I am cutting and I have noticed something I find strange. There seem to be multiple keys inside one frame ( see pic). I am guessing this is something extremely obvious that I as a new user do not understand, how to edit these keys within the frame?
View 1 Replies
View Related
Nov 17, 2011
Is there a setting for the time range where I only see frames that have keys? say I have the keys spaced out over time for my animation. but now I want to just veiew the keys and I don't want to use < and > to run through all the keys and I don't want to have hundreds of frames to scroll through..
like a Show-key frames only. type of thing.
View 4 Replies
View Related
Apr 20, 2012
There is no motion in my meshes when using set key or auto key.
So lets say I have a cube and set a keyframe at 1 and move it a little to the right and set a keyframe at 13, between 1 and 13 there's no motion from 1 to 13, just it jumping straight to 13. I hope that makes sense, I've tired going to Animate setkey options and checked current manipulator handle, didn't worked.
View 1 Replies
View Related
Mar 18, 2012
I have problem with Render setting window. I made an animation 240 frames and when I try to set the frame range it does´t want accept 240 and stays alway on 10. Start frame 1 - End frame 10, no more. I also try to change the frame/animations ext but it won´t accept multi frame neither.
View 5 Replies
View Related
Aug 28, 2012
I am having trouble with setting rotation to other then linear for the IK Controls, the FKs work fine. Is this some limitation, or option that I am missing ? Also, the keys are displayed as diamonds instead of the usual squares, so I guess there is some lock which I cannot find.
View 1 Replies
View Related
Oct 9, 2011
I have a skeleton with baked motion capture keys on every frame. I'm wondering if there is a method to convert these baked keys to curves, so it will be possible to start cleaning up the animation. I'm fairly new to dealing with mocap. Perhaps there is a method for achieving this in Motion Builder rather than Maya, that I'm not aware of?
View 2 Replies
View Related
Nov 17, 2011
I have a object divided to multiple parts, nearly 150, and when animating the rotation or any attribute I want some spacing between the keyframes, so that the second part starts moving after the first one by 5 frames, and it's about 150 objects, and i don' t want do it all manually, Is there any script or technique that could speed up my workflow.
View 4 Replies
View Related
Jan 20, 2011
I have made a 3d Spectrum analyser , its made of rectangular boxes 16 rows and 16 boxes in each row.
So i have made my cam from Bottom Left corner to Top Right over 96 Frames.
What i need to do, is make some of the blocks disappear and re appear as the cam pans across.
In sketchup i did it by HIDEING the component (block), make new scene, then un hide it..
View 1 Replies
View Related
Mar 27, 2012
there is a way to mark certain frames or certain regions of the maya timeline with labels.
Basically I want to be able to set a label at certain keyframes so that I can export this information for use in a third-party tool.
View 3 Replies
View Related
Jul 21, 2011
I have problem with Paint Skin Weights Tool. Maya doesnt show colour feedback so when painting weights I am not able to see almost anything.
View 5 Replies
View Related
Dec 13, 2012
Solutions for shifting keys, like if you need to add 30 keys in the middle of an animation?
View 5 Replies
View Related
May 7, 2013
I seem to have accidentally animated Exposure Value (located within the Exposure Control).
I don't know how to eliminate the animation and even though I try to manually reset the Exposure Value by turning of Autokey and then setting Exposure Value to the setting I want, I keep encountering a persistence of the animation.
What I mean is that I might reset the Exposure Value to zero, but then when I scrub the track, the Exposure value starts to change. I cannot figure out how to fix this as no matter where I reset the Exposure Value, when I scrub back and forth on the track, the Exposure Value changes to other values...
I've tried looking in the Curve Editor, but haven't been able to find keys. I also don't see any keys in the track.
View 3 Replies
View Related
Feb 17, 2011
I have rigged a character and made it into a character set in which i have locked the scaling attribute , I have then saved this file. I have then referenced this file and and have done a walk cycle animation and saved this file. I have then realised that I needed the scaling attribute when I have added other parts of my scene. Is there a way to unlock the scaling attribute in my walk cycle animation file or will i have to go back and change it in the rigged file, create a new character set and do the walk cycle animation again?
View 2 Replies
View Related
Apr 18, 2013
My current scene has 10 animation layers for a character, and seeing every f-curve from all layers, although grey and locked, when I only need to see the f-curves in layer I'm working on is really cluttering the graph editor. My current work around is selecting my active layer in the Layer Editor every time I select a rig control. Simple enough, but a pretty inefficient way of working. I can't seem to find a setting that allows me to just see ONLY the fcurves in the active layer. I imagine some of you out there may have hundreds of animations for a single game character.
View 4 Replies
View Related
Jan 20, 2011
I'm trying to animate a moving rope based on simulation data. I know how to import my motion data for individual objects.I've seen lots of tutorials where one uses simulations or soft bodies with IK in order to create a rope. how to use all these features and I want the rope to follow my coordinates exactly. I was hoping I could do something like the following:
1. create points in Maya which correspond to my data points
2. connect the points with a curve
3. loft a circle using the curve as a path in order to make a rope
4. move the points. due to History, the rope position is updated
Is there a way to do something like this in Maya? I've tried, and it looks like ep points do not have key-able channel data, so I can't create animations for them separately. I'm using .mov data file imports to generate x, y, and z motion keys for the points.
View 4 Replies
View Related
Feb 28, 2014
I'd like scale my biped animation. I have 200 frame mocap animation, all frame has keys. I want scale it to 72 frame. I found how can I scale the keys, is ok, but after scaling the bip01 bone jump there and back.
View 1 Replies
View Related
May 28, 2013
Is there anyway to delete frame blending in Track Editor in between keys?
View 6 Replies
View Related
Jul 31, 2011
i'm guessing in track view/curve editor or in the parameter editor...
View 1 Replies
View Related
Dec 11, 2010
I have an assignment for a class where part of the final project is detailing the construction of a mold for a part. The animation that I would like to do would show the build up of the part in a 3D printer layer by layer. The closest method of animating this that I can think of is unfortunately backwards.
As I would have the part and a camera facing up from the bottom of the part and would have a plane that would recede upwards in the y direction. This would reveal the part as the plane translates in the y direction.
This might be okay, but the problem is that I would like to show this from a camera on top facing down instead of a camera on bottom facing up. How I can create the look of a part being built up in this additive method?
View 2 Replies
View Related
Oct 10, 2012
I am trying to add an expression to the standard Mudbox car to make the wheels turn when the vehicle moves in both the X & Z dimension. I have found many scripts that let me do this in a single dimension. I have found some others that claim to work for both dimensions, but at certain angles the wheels turn in the wrong direction.
My work flow is as follows:
1 - Export car from Mudbox to Maya
2 - Separate the wheels & center pivot all items
3 - Add NurbsCurves to create a rig
4 - Parenting the elements of the car
5 - Add an expression based on this web post [URL].......
6 - Test the animation
It works great when translating the car in the Z axis, but when the car is rotated 95 degrees in the Y axis the wheel will only go backwards no matter which direction the car is moved.
I have attached an MB (Maya 2013) so you can see the
problem.mudboxcar_maya_2plusexpression.mb.zip
View 7 Replies
View Related
Mar 6, 2012
translate facial motion capturing data (basically 2d point clouds) to blendshape weights. I finished rigging my character and wanted to drive my blendshapes by the relative position of my tracking data, e.g. distance between corners of the mouth drive the "wide" blendshape and so on...
Hope YOU know a solution for this, I believe blendshapes are THE way to create realism in tracked animation but I was not able to find ANY reference to something like that. I'd like it to be customizable and not to expensive, so the imagemetrics faceware service won't do for me
View 1 Replies
View Related
Apr 3, 2011
How come baking some part of animation in graph editor deletes everything before and after the part i bake and how can i bake that part while leaving the rest untouched?
View 2 Replies
View Related
Oct 23, 2012
I have a character with animation. Another character is the same(same bones, meshes), but with no animation, 100 times larger in size and I resize the head to make the head looks slimmer. They are saved in different fbx files and I imported them into mb scenes. I select the root bone and "select hierarchy", the export options is shown below. Then select in the same way in the larger character's scene, the importer options is shown below. THE PROBLEM is: after I import the atom, the character becomes shrinked to the same size as the former one and the ratio of head becomes the same as the former one too.
View 1 Replies
View Related
Dec 22, 2010
For some scenes we have a chain which is wrapped around several cogs, just like a bicycle. In this scenario we need the chain links to follow the path and retain their relationship to each other.
In other scenes we have a chain which follows along a changing path. Imagine this if you can: A heavy weight has a chain attached which goes vertically up, over a pulley and down the other side where it is attached to a lorry. The lorry drives off pulling the weight upwards. This is my challenge!
Should I individually constrain the links using a Pin constraint and use dynamics completely to keep the chain taught?
View 1 Replies
View Related
Nov 29, 2010
Was wondering if there is a way of getting random camera movements? For example, i am doing a fly through of an earthquake scene and as the camera animates along the street it randomly shakes with the earthquake shocks.
I know I could animate it by hand but I wondered if there was a way (perhaps an expression) to make it more simple?
View 3 Replies
View Related
