Is there a setting for the time range where I only see frames that have keys? say I have the keys spaced out over time for my animation. but now I want to just veiew the keys and I don't want to use < and > to run through all the keys and I don't want to have hundreds of frames to scroll through..
like a Show-key frames only. type of thing.
How to make so that when you move any object in scene(3ds max), your time slider is moving, for example to 3 keys and creates the keys.
If its an script option, Give me some code for example of doing something like that, using functions of slider, so i can logically came to solution in this hard stuff(will take time i guess).
For some reason when I scrub through my animation, it runs really slow. And it has nothing to do with my computer itself. It is the particular file. I tested this by opening up one of my others (i saved in iterations) and they all scrub just fine. All I was doing was animating with a rig, so there isnt any extra polygons or whatever. And on top of that, it worked just fine before I exited the program earlier, I even playblasted it and everything, and then I looked at the playblast later and decided I wanted to change something, reopened the file, and the timeline has been chugging ever since. I tried opening and closing maya already.
View 1 Replies View RelatedI've been having this issue with Maya's timelines since my first usage of 2010 (on Windows) and now 2011 on Mac. The problem is an odd one, My keys start to show up "between" two frames in my timeline. This makes selecting and moving, and judging timeline distances super difficult. If I open up the graph editor, I get the same results.
I'm running Maya 2011 x64 Educational SP1 on Snow Leopard 10.6.8 on an 2009 iMac. I'm not sure this has any bearing on what is happening in my timeline, as I've had similar results on a Windows machine a few years ago.
I've been working on this scene for a few weeks now, and only recently did this start happening, near the end of the timeline in the scene. I am working at 24fps REALTIME, which is necessary for the project. I have also tried scaling the timeline up and won, but I get no relief from the problem.
I made a stupid mistake and started lip-syncing a long piece of animation at 25 FPS instead of 24 which I need to use. I just set it to 24 and it put all of my keys on frames like 10.68 or 54.22, it has become really frustrating to animate with. I was wondering if there's some way to snap these keyframes to solid keys instead of having them on decimals, I don't care if the animation is slightly off, I can fix it later.
View 2 Replies View RelatedI don't remember how to copy keys on the timeline by dragging MMB.
I tried Shift + S, Ctrl + S and is not working. What is the keyboard shortcuts ?
How to copy and paste keys? Can I do it in the timeline or graph editor, how?
View 1 Replies View RelatedI'd like to know if it is possible to add multiple keys on multiple curves in one step in graph editor as marked on attached image.
View 2 Replies View RelatedI am currently working on a game and am pretty new to the world of Maya ( 2D animator gone rogue!), I have some animation that I am cutting and I have noticed something I find strange. There seem to be multiple keys inside one frame ( see pic). I am guessing this is something extremely obvious that I as a new user do not understand, how to edit these keys within the frame?
View 1 Replies View RelatedThere is no motion in my meshes when using set key or auto key.
So lets say I have a cube and set a keyframe at 1 and move it a little to the right and set a keyframe at 13, between 1 and 13 there's no motion from 1 to 13, just it jumping straight to 13. I hope that makes sense, I've tired going to Animate setkey options and checked current manipulator handle, didn't worked.
I am having trouble with setting rotation to other then linear for the IK Controls, the FKs work fine. Is this some limitation, or option that I am missing ? Also, the keys are displayed as diamonds instead of the usual squares, so I guess there is some lock which I cannot find.
View 1 Replies View RelatedI have a skeleton with baked motion capture keys on every frame. I'm wondering if there is a method to convert these baked keys to curves, so it will be possible to start cleaning up the animation. I'm fairly new to dealing with mocap. Perhaps there is a method for achieving this in Motion Builder rather than Maya, that I'm not aware of?
View 2 Replies View RelatedIn the expression editor, is it possible to get the position of an object at a different time ?
For example, we are at time 100, and I would like to get a given object's position when we were at time 50. Is it possible?
When animating, I have to manually key all the bones on frame 1, and then manually key all the bones on frame "whatever". If I don't key every bone myself, then bones I missed on frame one will become the same as the ones on frame "whatever". I was wondering if there a way to select and key all the bones at the same time? I tried, just slecting all the bones in one 'left-click', and that only seems to key the root bones.
I am actually a 3D modeler from a different program trying to learn Maya. I have spent the past 5 days just watching youtube tutorials, but for some reason they do not seem to have the problem I am having.
Here are what my setting look like: [URL]...
My Animation Graph Editor is only showing one animation curve (for one attribute) at a time after I have set multiple keyframes for the character set and various attributes. I select multiple attributes, and hit View-Frame All, and it only shows the top attribute of the selected attributes as one curve.
View 2 Replies View Relatedcan't select range of time in some Scene
[URL]........
look what happen when i del all the key in the HumanIK system
[URL].......
is there a way to animate say from a blinn to a lambert shader over time?
View 4 Replies View RelatedIn Lightroom 3 when you moved through images these modify keys (+ and -) would always remain at the temperature slider. It seems to now always default to exposure. Is there anyway you can change this?
View 1 Replies View RelatedI have been working in PSP since PSP 7 so I am pretty familiar with the program. In PSP X4 when I go to adjust the opacity of a raster layer using the opacity slider on the layer palette toolbar. I click on it and I can't use the arrow keys to adjust the value. My arrow keys have no effect on the opacity slider at all. how I can get it working? It has never worked for me in PSP X4.
View 6 Replies View RelatedCan I zoom into the time slider? When moving keys using the time slider they do not go to the frame I would like because the my current length is 3000 frmaes. The frames just won't snap to each indivual frame so they can be placed properly.
I'm wondering if you can zoom into the time slider, so all 3000 frames are not visible across the bar. If you could zoom in to, say, only have a couple hundred frames showing in the time slider, the snapping when dragging keys would be more accurate.
• Intel i7-975 - 3.33 GHZ
• 24 GB RAM
• Samsung 256 GB - SSD
• NVIDIA GTX 295
• 3ds Max 2013
• Windows 7 - 64 bit
• SpaceMouse Pro
I'm new to scripting and i want to make a facial controller panel. but the case is when i want to change the morpher value by slider inside maxscript "" i don't know how to do that ""
View 2 Replies View Relatedhow the draggable slider would be put together. How this could be accomplished? how this would work?
View 15 Replies View RelatedI'm trying to determine how to change the color of an object based upon a custom attribute slider. It would only need to change between 2 colors. I know this can be done by simply autokeying but using a slider would be more useful for my situation.
Is there a way to do this? I've been playing with wiring a simple cube's material but am not sure how to do this.
Solutions for shifting keys, like if you need to add 30 keys in the middle of an animation?
View 5 Replies View RelatedI am trying to synch several biped characters to an HD background video I have placed in the environment slot. The problem is that when I scrub the animation slider or hit the play button, Max cannot play the background video in real time. When I hit play, the video remains frozen on whatever frame it was last on, but then updates to the correct frame when I hit the stop button.
It is pretty difficult to get the timing right on the foreground biped animation without a real time background reference. I also tried a lower res version of the background video (standard 720 x 480 DV), but that also does not play in real time. Is there any way to get max to play the background video in sync i.e., updating the frames in real time? Is there a way to improve max performance (ideal settings?)for a background video? Would a Tiff sequence play quicker than a .mpg or .mov files? If so how do set up an .ifl for playing an image sequence?
issue with the component editor in Maya 2012. It seems that the handy slider at the bottom of the editor for blending weights doesn't work. I've installed hotfix 4 and it still seems busted.
View 1 Replies View RelatedI seem to have accidentally animated Exposure Value (located within the Exposure Control).
I don't know how to eliminate the animation and even though I try to manually reset the Exposure Value by turning of Autokey and then setting Exposure Value to the setting I want, I keep encountering a persistence of the animation.
What I mean is that I might reset the Exposure Value to zero, but then when I scrub the track, the Exposure value starts to change. I cannot figure out how to fix this as no matter where I reset the Exposure Value, when I scrub back and forth on the track, the Exposure Value changes to other values...
I've tried looking in the Curve Editor, but haven't been able to find keys. I also don't see any keys in the track.
I have rigged a character and made it into a character set in which i have locked the scaling attribute , I have then saved this file. I have then referenced this file and and have done a walk cycle animation and saved this file. I have then realised that I needed the scaling attribute when I have added other parts of my scene. Is there a way to unlock the scaling attribute in my walk cycle animation file or will i have to go back and change it in the rigged file, create a new character set and do the walk cycle animation again?
View 2 Replies View RelatedMy current scene has 10 animation layers for a character, and seeing every f-curve from all layers, although grey and locked, when I only need to see the f-curves in layer I'm working on is really cluttering the graph editor. My current work around is selecting my active layer in the Layer Editor every time I select a rig control. Simple enough, but a pretty inefficient way of working. I can't seem to find a setting that allows me to just see ONLY the fcurves in the active layer. I imagine some of you out there may have hundreds of animations for a single game character.
View 4 Replies View RelatedI'm trying to animate a moving rope based on simulation data. I know how to import my motion data for individual objects.I've seen lots of tutorials where one uses simulations or soft bodies with IK in order to create a rope. how to use all these features and I want the rope to follow my coordinates exactly. I was hoping I could do something like the following:
1. create points in Maya which correspond to my data points
2. connect the points with a curve
3. loft a circle using the curve as a path in order to make a rope
4. move the points. due to History, the rope position is updated
Is there a way to do something like this in Maya? I've tried, and it looks like ep points do not have key-able channel data, so I can't create animations for them separately. I'm using .mov data file imports to generate x, y, and z motion keys for the points.
I'd like scale my biped animation. I have 200 frame mocap animation, all frame has keys. I want scale it to 72 frame. I found how can I scale the keys, is ok, but after scaling the bip01 bone jump there and back.
View 1 Replies View Related