The full message I'm getting reads: "Error loading PSD file: Unsupported compression mode: 60157."
Is there anything I can do to remedy this? I don't have PSD, so I can't open it that way...
The full my message I get is: "Error loading PSD file: Unsupported compression mode: 65409", do you know why? Is the file corrupted? Is there any way to recover it?
I don't have Photoshop, by the way. I use .psd format because I work on both GIMP and SAI. I tried to open it at SAI, but there were nothing but lines. The colors went missing.
I really don't want to lost the file, since this is something I work on for months. I can't redraw all the thing I drew since the deadline is in the end of May!
I am new to gimp and after using the program yesterday afternoon I went in to do some more work on the document and got the following error message: "Error loading PSD file: Unsupported Compression Mode: Error #43775. How to get this file opened? I was Opening As Layers.
View 1 Replies View RelatedI recently had to make the move from CS4 on Mac OS 10.5.6 to CS4 x64 on Vista.
I opened a file and worked on it with no problems on the new CS4 x64 setup. It also saved multiple times throughout with no apparent problems.
When I have tried to reopen the file on the same CS4 x64 Vista setup I get the following errors in this order:
--
This document contains unknown data which will be discarded to keep layers editable. To preserve the original appearance instead, choose Flatten to load composite data as a flattened image.
Options - Keep Layers, Cancel, Flatten
(If I choose Flatten I get this error: Could not complete your request because an unexpected end-of-file was encountered)
I choose Keep Layers -->
--
The file uses an unsupported blending mode. Substitute normal mode?
Options - OK, Cancel, Flatten
(If I choose Flatten: Could not complete your request because an unexpected end-of-file was encountered)
I choose OK -->
--
encountered reading layer
"Shape 1 copy 220"
because of a program error.
Continue?
I choose OK -->
--
Some groupes were found corrupted and repaired.
OK -->
--
Could not complete your request because the file is not compatible with this version of Photoshop.
OK -->
And the file has closed itself.
I cannot open this file on either CS4 on the mac or CS4 x64 on the PC.
As a side note, this particular file is a personal blog design I've been working with on and off for several months so I can't be 100% sure, but I don't believe I have a layer called 'Shape 1 copy 220' as I surely would remember copying a layer 220 times.
Of course, it is annoying that I lost maybe 4 hours work (I have a backup of the original file), but my main concern is this happening again - especially with commercial work. Can anyone shed any light on known issues between Mac and PC versions of CS4?
I'm having a problem loading a 5.5GB PSD file. it's generated from Lightwave a 3D software but every time i try to load it i get the following message:
Error loading PSD file: Unsupported compression mode: 58596
i've done this before and opened 3 and even 4gb files and never had a problem do you know if there is a cap on file size?
I have a Gateway 500SE PC, Home XP, Nikon View 6.0.0, Photoshop Elements 1.01. I have a Nikon D100 camera. When I import a Nef uncompressed file into Elements it gives me an error box...Unsupported Color Depth. I must change these pictures to a supported color depth. This takes too much time to change every picture in a folder when you want to make a contact sheet What is this and how do I fix it?
View 4 Replies View Relatedi just started using gimp on ubuntu 13.10 . almost half of the menu items are greyed out. most of the filters work or ar not greyed out, g'mic is greyed out and so is most of the stuff in the file menu (export, save, save as, etc.) . i already tried re-installing gimp from the software center with no prevail. this is how it was the first time i installed it on this new ubuntu 13.10 .
is there something that i can do to maybe refresh the entire gimp folder maybe? maybe delete it then re-install gimp. i really dont know if this would fix anything though.
this is really irritating. and no its not the "image RGB/indexed mode" problem.
im pretty sure i dont have anything installed (like some weird ubuntu restricted access fake file) that could interfere with the interface at all as this is a pretty fresh installation. the most i have installed that might even be close to interfering with the interface is "pipelight" which is for flash and silverlight, not gimp.
i even tried different color profiles and none of them work. i even downloaded the brand new color profiles from adobe. none of those work either.
the only way i got ALL of the menu options back, including g'mic, was opening gimp through raw therapee (basically adobe lightroom for ubuntu) which might be of some use in finding an answer to this?
i already have everything i need installed including the ubuntu restricted access extras and such.i just would like gimp to open normally with all the normal file menu options enabled like everyone elses and not be all greyed out ..
I want to be able to use a windows batch file to create a gradient for gimp.
My code is: Code ........
I am trying to open an .AI file, and am having almost success. Instead of loading the whole image, it cuts off about 50% of the image, leaving just the center. I altered the rendering width and height in the Import from PostScript window and it successfully extended the image to include the right side, but the left is still truncated. How can I get this whole image to open?
I can resort to just mirroring the left and right sides to fill in the blanks, but I would really rather not do that if it is possible.
I am running Windows 7 64-bit, with Gimp ver 2.6.11
program which has full PSD support? (ie not Photoshop)
View 11 Replies View RelatedI get message in Lightroom when exporting the raw file. "The file appears to be unsupported or damaged (1)"
View 7 Replies View RelatedMac Powerbook Pro 10.9, Lightroom 5.2. All my files now indicate, "The file appears to be unsupported or damaged."Â
View 1 Replies View RelatedHad a client request a schematic but for the hardware of a schematic to be represented with JPEGs of the component.Having a bizarre one where I've re-opened a DWG which had about 15 JPEGs in (which were copied from pictures off of the net) and the images aren't appearing when re-opening the file. I've just got a blank space with a boundary with drag points.
When I double click on where the image is supposed to be I got the 'Image Adjust' properties box and a space where the image is supposed to be in the box and all it says is 'Image File Unsupported.'
I'm fearing having the 'ball ache' of having to obtain the images again, and cropping them and resizing them and wasting a load of time on them which I haven't got to spear.
Installed the latest 2.8.4 build for WIN 32 bit. This newly installed version only recognizes the .xcf file type; it will not save to, or load any of my numerous files saved as .xcf.gz
The message I get is:
The given filename does not have any known file extension. enter a known file extension or select a file format from the file format list.
The file format list only contains .xcf
I've uninstalled and reinstalled with a fresh download, with the same results.
Simply wondering how possible it is, because we've got roughly 2400 files that need to be re-saved without RLE compression due to causing issues in the conversion process. A manual job would take quite a while.
If there's no way of automating the process, is there any way of reducing the time of re-saving every image individually at all?
Make beautiful gradients. I know, its by using different colors, but when the times come for saving the image ( i prefer png at compression level 1) you have to make it narrow(if gradient is perfectly vertical).
But if you crop lenght at 1px you always get inferior image after you put it in website as background for example. roping at 10px wide does work but it still not good enough..
today i downloaded gimp 2.8.2 for windows 8, but when i tried to run the installer it downloads halfway and then displays an error message.
it says something in the style of: An error occurred when trying to copy a file. The source file is corrupted.
what is the diffrence between these two pictures(the same picture both are .JPG images but the quality and size is diffrent)
i assume that they are saved with diffrent compression and encoding or sumthing like that.
BMW 1 (Good Quality)
BMW 2 (Normal Quality)
Cadalac 1 (Good Quality)
Cadalac 2 (Normal Quality)
EDIT: to see the diffrence between them, you must look at them with atleast 2x or 3x
I have CS3 extended and have been compiling a series of high resolution photographs into one layer in photoshop. I have copy and pasted each photo and then stitched them together resulting in a file that is 1.35Gb. I want to compress the file, keeping the resolution as high as possible, so it is easier to use in illustrator and import into ArcGIS. I have tried saving the file as a jpg, pdf and tiff with variable compression qualities. As soon as i open the image up in a different programme and zoom in I loose the picture, eitehr to a blank screen or a message saying 'invalid format/picture'. Opening the file and saving is taking so long too do as well...
View 3 Replies View RelatedI'm trying to make an avatar for the forums here, but I can't seem to make it small enough (file size) for it to be usable.
Is there some way I can compress this down to 8kb without losing quality?
I can't get started - I have downloaded GIMP 2.8 but can't get it running as I get this error message:
"USER Installation Failed.
The GIMP user installation failed; see the log for details. It appears that you are using GIMP for the first time. GIMP will now create a folder named '/Users /andrzejnowosielski/Library/Application Support/GIMP/2.8' and copy some files to it.
Creating folder '/Users/myname/Library/Application Support/GIMP/2.8'..Cannot create folder '/Users/myname/Library/Application Support/GIMP/2.8': Permission denied" myname is my full name not myname......
I am using a Max with OSX version 10.7.5..I have checked all the relevant folders and made them all Read Write..I have tried making the relevant folders manually and re-starting GIMP but same message.
After working on a jpg file, when I want to save it, still as jpg, with my Photoshop CS5,
- sometimes photoshop will just save the picture, and it's done
- sometimes photoshop will show me the compression dialog, "JPEG Options", in which I can choose the compression ratio, the format options (baseline, baseline optimized, progressive), and have an estimation of the total file size
Â
While not being prompted any dialog is simpler, and I'll then simply assume Photoshop decides to retain the current image's compression and format rules, I must say I like to be in control, and I'd like to know under what form the file is being saved without having to resort to the much more complex "Save For Web" menu.
Â
WHAT "triggers" the appearance of the JPEG Options when we close/save a jpeg file, in photoshop ? What makes this menu not to appear, what makes it appear ? If there are trivial file operations/changes/filters that necessarily trigger its appearance when we want to save, something like that ?
I have created a psd file with GIMP (version 2.6.11) which I have created myself, opened and saved several times.
Today I try to continue my work on this file and I got error 17718 when trying to open the file. I have never opened this file with another application than GIMP.
- How can I prevent it from happening again?- Most importantly: How can I repair the file, so that my work is not lost?
I have GIMP 2.6 installed under Windows xp. When I try to open an .eps file, I get this error:
Error starting Ghostscript. Make sure that Ghostscript is installed and - if necessary - use the environment variable GS_PROG to tell GIMP about its location.
(Failed to execute child process (No such file or directory))
I then downloaded Ghostscript and went thru its regular Windows installation routine. I get the same error in GIMP trying to open an .eps file. How to set the variable GS_PROG and can't find instructions for this variable in the on-line GIMP manual.
I use CS5 on Win 7 64-bit. Today I learned about this option to disable file compression to speed up save time:
[URL]........
Â
I downloaded the reg key and installed it. When I restarted PS to test it on a file, there was no difference in either save time or file size. The test file is a 300 MB multi-layered PSD file.
I am trying to export .MOV file for resolution 1280x1080 (HD) compression is  DVCPRO (for broadcast) server is Harris. And i m  making a project on the 1280x1080 8 bit, field 2, fps 25.  and using the file which has size 1280x1080 at 50 P.
Â
So when i export this as .MOV and choose compression DVC pro 1080. it gives me error message, "frame rate and bit dept is not same of the clip and compression u choose
Previously, I had been able to add .aco color palettes to GIMP and use them. But they are suddenly no longer in my palettes menu and I'm getting this error for each one I had added (and used before):
Fatal parse error in palette file 'C:UsersChristina.gimp-2.8palettesTransitional.aco': Missing magic header.
I recently bought some brushes for Photoshop, knowing I could use them on gimp, but I keep receiving this message:
Failed to load data:
Fatal parse error in brush file 'C:Program FilesGIMP 2sharegimp2.0rushesKyleMegapack.abr': unable to decode abr format version 14402.
I'm not sure what is wrong. My best guess is that the Photoshop version this was made for is not compatible with Gimp 2.8.10. The guy who made these brushes (Kyle T Webster) said that Photoshop CS5 or higher is required. The brush set was only $13, so I'm not really worried about the money, but is there any way I can use these brushes, or will I have to wait for a Gimp update or something?
Hi, I've been sent the BETA version of CS4 and when it loads now I get a message saying "Some of the application components are missing from the Application directory, please reinstall the missing components."
I've uninstalled and reinstalled but to no avail.
I am unable to save an image as a jpg file!!! every time I try, I get the following error: "Not A Regular File"
I can save as png, but not jpg!!! the original format was psd, that error message came up when saving as jpg... when I saved as png, I closed Gimp and reopened the png file, but I STILL get that error message when saving as jpg!!
I'm running PSPX3. the effect of no compression (or compression factor = 1) on saving files. I've got a JPEG image file straight from my camera that's approximately 4.1MB in size. If I do nothing else but "Save As" with a compression factor of 1, the new file size is approximately 50% larger, or 6.2MB. What has changed to make the file size larger? Both images are still 72DPI, 3648X2736px. I can't image that I have done anything to "improve" image quality, so why did the file size increase?
View 14 Replies View Related