AutoCAD Inventor :: Professional Part Files Will Not Open
May 2, 2013
I had a copy of Inventor 2013; It worked well up untilrecently. I moved some folders on my hard drive, and the program no longer could find the files. I went into options and changed the pathway for any prompt I saw had the former location. Next the part files I am working on are said to be missing. Something about the project location. I tried adding the files through managing the project found in options. Now Inventor says it is unable to open or even recognize the part files saved. How can I recover the files Attached are screenshots of the errors.
Using the 'Run Other' rule I can run a rule to switch holes on & off in a part. The rule is in the part & the run other rule in the drawing. The drawing will only update once the part is open. I would like to see the part open when the rule is ran from the drawing, how can this be done?
I have a problem when I`m creating a new part in assembly.
I`m in assembly and I push a create button. Then I give it a name and OK. Then I push a plane where I want to make the part. New sketch comes but no sketch panel. I have to push right button from mouse and click finish sketch. Then when I go edit sketch the sketch panel comes like it suppose it to be.
using IV2012 within the same project file i have three models. one model i can open parts or assemblies from the browser or right click on the component on the window. the other two models upon the right click or selecting in the browser the open or the edit are not available as an operation.
T7400-64bit XP Xeon 3.2 GHz, 8GB 1.5GB NVIDIA Quadro FX5600 Factory Design Suite 2012
I recently downloaded the student version of Inventor Professional 2013 (64-bit). I made some parts and ran some stress analysis simulations on the parts. I restarted Inventor after running a simulation and upon the reopen, none of the add-ins on the Environments tab were there and the Add-Ins manager does not open. I tried uninstalling and reinstalling the entire program, even tried installing different model years of Inventor; none of the versions load the add-ins and the add-in manager fails to load.
I need to draw a cylindrical cam in Inventor Professional 2013. I tried using the cam module but it is not what I need. My cam can be generated by a third-degree polynomial. You could use the new "curve from equation"?
Is there a service pack in the pipeline that will allow Inventor 2013 to run on Windows 8.1? It was working fine on 8 but crashes on the loading screen now Ive upgraded to 8.1. Upgrading to 2014 is not an option for me as my professor uses 2013 software and he will not be able to open 2014 files.
At work we have recently upgraded to Inventor 2013 Pro, Although Inventor isnt the most widely used program in the company so its hard to find time to do some set up and get it going smooth. My problem is that i am working on a large process plant all done in inventor and the file is quite large. It takes along time to load and is really laggy when inside the model. Now the model is based in my local office's server my question is if i was using Vault would it keep a local copy on my C:// rather than trying to refresh all parts from ther server. If it is a matter that when working with large files using Vault is the better option than i will need to take some advantages
This morning I somehow changed the way the command icons are displayed, so how can I restore the command icons back to the default display. I've tried to figure out where the setting is for the way the icons are displayed, but I haven't been able to reset it back to the default setting.
Here's what the display got changed to, that I want to change back to the default setting.
Just installed 2012 Pro last week and tried to run FEA today. Everything else is running fine. Started with existing model and had this error. Went to a simple part with rectangle sketch 6x1x.125thk and still receive error. Found multiple issues with mesher errors in forum. So I removed all Autodesk products, cleaned registry, turned off antivirus and reinstalled software and SP1 and still receive error.
I think that something is not the way it is suppose to be at my ribbon I have a Inventor Studio icon but by defaults is not active (it's grayed out) so in order to turn it on I have to go to add ins and turn Inventor Studio off and than on again and in that way I am able to activate the Inventor Studio button but after that all the buttons in the Rendering Studio tab are inactive so I cannot use them. And I cannot figure out where is the problem. Is it because I am using the student version of the software and it has some kind of limitations on the rendering engine, or it is some kind of malfunctioning of my installation. Everything else is working normally I can modell I can do a rey tracing viewport renders but I cannot run the studio environment interface.
Im building a bracelet, and I built the bottom and top half in 2 files. After assembling them and putting on my pivot point I wanted to use the shape of the tip from the top half to make a matching depression in the bottom half.
I have created a new item in content center in my personnel library. When i am creating a new item in content center its creating *.ipt file somewhere ? If so from which location i can open the part file ?
when I'm in a part file and attempting to open the related drawing file by right clicking on the part name at the top of the design tree, the drawing can't be found automatically and I've to find it in the file open dialogue box.
is it possible to write a plug in that runs when a user does something.example. you start inventor and open a assembly file the user selects a part and the plugin automatically runs.no pussing buttons, no quick key, it just runs.
Op System: Windows 7 Home Premium Processor: Intel Core I7 960 Ram 12.0 GB system 64 Bit operating system. MIcrosoft Excel info: Excel 2010 (14.0.4756.1000) MSO(14.0.5113.5000) Microsoft Office Home and Student 2010 Inventor Info: Autodesk Inventor Professional 2012 54 bit edition Build: 160, release 2012 RTM Date 3/1/2011
When trying to link to excel file get error "Not Implemented". Have tried the registry 'fix' - does not work. Need to get these links working to drive models. This same Excel version works fine for Solidworks which inks perfectly with no issues whatsoever. Inventor has been a problem for 2011,and now 2012 - still not working.
I typically need to download iges, step files for assemblies and would like to assign their actual weights to the respective parts. These weights are typically not in the iproperties because they are just surfaces.
how to assign specific weights to the general properties in the iproperties box?
In testing my latest automation project, I've found that I can't save copies of a part multiple times (after deleteing the files off the disk) unless I close out of the top level assembly document, and reopen it. I used Process Monitor and determined that Inventor is trying to save to an existing file instead of creating a new file.
How can I make an assembly file independent from the part files that went into it? I tried converting it to STL then opening the STL document, but that causes problems with what I'm trying to accomplish.
I am creating part files for one of our machines, and how to proceed with making a smooth transition on the bevel, like it is showing on the print from our customer.
We just installed the new version of 2012 Product Design Suite. I've spend many hours creating great little ilogic dialog boxes to populate iproperty fields using custom iproperties and then automatically place this data on the .idw file when the view is placed on the new drawing. All works great when the part is created with my new 2012 part template and then placed on my new 2012 idw template. The trouble is with parts that were created with 2011 Inventor. Obviously, the old template does not have the ilogic data built into it. Is there a way to upgrade/migrate the part template file from 2011 to 2012 on an existing part?
I think I'm asking for a miracle here, but I have an assembly with 40-50 parts that I created in 2011 and now need to build the idw files for them and would really like to be able have the customized iproperties added to the existing part files.
The goal of this project is to take a base part file, save new copies as needed, then modify the copies. They're rings for storage tanks that share the same tank diameter but differ in height and thickness. I have a SaveAsCopy rule in my template ring part that I run externally from my main assembly after passing down the new file names to the part rule. Since I'm testing a lot, I'm always deleting the parts from the assembly, then clearing out the new copies from my folder and running the rule again. Eventually after 1-5 times inventor starts giving me an error.
The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG)) The More Info Tab:
System.ArgumentException: The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG)) at System.RuntimeType.ForwardCallToInvokeMember(String memberName, BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData& msgData) at Inventor.Document.SaveAs(String FileName, Boolean SaveCopyAs) at LmiRuleScript.Main() at Autodesk.iLogic.Exec.AppDomExec.ExecRuleInAssembly(Assembly assem) at iLogic.RuleEvalContainer.ExecRuleEval(String execRule)
The two other posts on here that deal with that error say it involves enumerating an array that is being changed and looking for an entry that is gone. I have a feeling it has to do with a left over variable (but this is all in iLogic rules so they get cleared at the end of the rule?), temporary files or remnant file references. It works again if I close the assembly and open it back up. Inventor 2013 SP 1.1
I am using an educational version of inventor 2013 and I have been making part drawings and saving them as .dwg. I have tried to view these files using edrawings at school and it says there is a error in viewing the files. I have also sent the files to several friends that have various programs for viewing dwg files and none of them are able to open the files. I can open them perfectly fine from my computer using dwg truview. I have also tried saving them as different file types such as .dxf but these wont open either.
I am having difficulties opening some files today. They are files that I normally work with everyday. They are an stp. file and jt. file. See attachments... These are hot items I need to be working on so the sooner the better.
When I do this, inventor keeps closing unexpectedly as well.
