Using the 'Run Other' rule I can run a rule to switch holes on & off in a part. The rule is in the part & the run other rule in the drawing. The drawing will only update once the part is open. I would like to see the part open when the rule is ran from the drawing, how can this be done?
View 3 RepliesI am wondering if it is possible to do a style update (or style update check) upon open of a drawing?
The example would be that I have stuff made from way back that the colors/dimension sytles ect dont match the current standard and upon opening a file where they are not current, it would either prompt to update immediatly OR update automatically with no prompting (preferred method).
I am doing a massive amount of updates from old files recently and to save myself 1 - 3 clicks per drawing would be wonderful.
The right click context menu on the top level assembly (on the model tree in Inventor) has the option of 'Open Drawing'.
Is there a way to do that via iLogic? Unfortunately I can't figure it out if there is. I would like to open and update the relevant drawing.
Also have tried it the other way around, that is to run my rues in the assembly from the drawing since the drawing is the parent. But I am not sure how to reference the assembly.
when I'm in a part file and attempting to open the related drawing file by right clicking on the part name at the top of the design tree, the drawing can't be found automatically and I've to find it in the file open dialogue box.
View 2 Replies View RelatedNew user 2014
Part created in assembly does not update to part file.
To create my new part, i used the deriven part of another part, and used only ‘Body as work surface’ before inserting in my new part.
When I create the drawing of my new part, why is it that I still see all the ‘Body work surfaces’ of the direven part?
When I make it on my other computer I dont see it... so it is surely an option…
I am having some issues concerning updating drawings. When a part (.IPT) is placed in a drawing, everything is fine (ie. the views represented in the drawing are up-to-date). Yet, when I make a change to the part (something as small as a dimensional change) it does not translate through to the drawing. This is also the case for iProperties.
I have been playing around for a while now, but have had no luck. The part is also an iPart, but this shouldn't matter.
I am working on an assembly with subassemblies totaling over 400+ parts. I have been renaming a bunch of the files, then opening the assembly and updating the part associasions. Most parts changed their name to the respective file name, while others have not (within the assembly). When I open the actual part, the proper part name shows up, but within the assmeblies the original name shows. I went into iproperties and the occurences tab; the proper name is shown. The proper part names show up within design assistant as well (via right clicking on assembly file).
How can I have the part names within the assemblies update to the proper names?
I am trying to programatically update Units of Measure on a part or document through Document Settings, but the changes are not reflected. I cannot save the file, because the file is a result of import, so I want to leave it up to the user. During import, I am recognizing what type of units the import file has, and I need to impose them on the document, and immediately show. I cannot use templates. There is a similar issue when the Units of Measure are updated manually through the screen, they are not reflected.
View 3 Replies View RelatedI'm running an iLogic based model where I have a technical housing with 2 cover parts on top.
The first cover part is the basic part.
I use iLogic to assign a RAL-color to several parts in the assembly, also to that cover. The color is assigned to several features of the cover part.
The second cover part is almost identical to the first one.
So my first feature in the second cover part is a derived part of the 1st cover. I derived all the bodies.
When I'm in my assembly and I pick a RAL-color in my created customization form, the RAL-color only changes in the 1st cover part (the original), but it doesn't change in the second cover part, the derived body.
But....
when I manually open the 2nd cover part, and I right click on the derived feature and click on 'Edit Derived Part' ; the new color shows up immediately!
So, my question is if there is a rule for iLogic to update the color automatically?
The attached part, created in Inventor 2012, has a formula for the number of occurances in a sketch pattern based on its length. When this number changes due to a length change, some parts of the sketch do not reposition and Inventor does not indicate that an update is required. The part can be fixed by dragging the affected geometry or performing a rebuild all. The following image shows the result when the length changes from 300 to 500.
View 6 Replies View Relatedi made a sheet metal part.ipt but that file is not updating immediately, i have added
iLogicVb.UpdateWhenDone = True
InventorVb.DocumentUpdate()
also tick marked in parameters for IMMEDIATe update
Using 2013 sp1.1...After I change the hole size in the part, the callout in my hole note does not update. (crazy, I know).
If I pull a new hole note after the change, it has the correct dimension. But, if I change the hole size again, this new hole note does not update.I put the part on a new idw and it updates correctly, so somehow the idw is hosed.
I’m trying to get the embossed text on a nameplate (done in sketch on a part) to change with updating a custom property in iProperties. Right now I’m using iLogic so I can change the text in User Parameters and that updates the embossed text. So where I’m having an issue is the Export Parameters tab is grayed out so I can’t get it work with my custom properties.
View 1 Replies View RelatedWhen I attempt to place from Content Center some components, I receive the error message I attached:
"Unable to Update Content Part . Write permission is missing."
I receive this error not for all files.
I went into an assembly to change some parts and sub-assemblies and now everytime I move a part or constrain something I get this message "Errors Occurred During Update". Why is this happening?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
When I insert a threaded part from the Content Center I get this message "unable to successfully update the member part file, problem occurred when setting thread data" The fastener will insert but the threads are very small.
View 7 Replies View RelatedI am using Inventor Pro 2010.I have a model and I am driving the dimensions from EXCEL. The model updates nicely when I change dimensions but the drawing (idw) does nothing. In the browser instead of the usual tree in the view there is this red lightning bolt and under them is a big plus (+) sign and the words Solid.... after it.I was assuming that the lightning bolt meant something needed updating, but I can't find how this is done.
View 9 Replies View RelatedA coworker brought this to my attention and I was also immediately able to reproduce this. We use content center C channels and other common beams a lot. After inserting one into an assembly if you right click and select change size and edit the length it typically doesn't update to the correct length.
Example:
Insert a 10" Ansi MC/C channel any size
right click and select change size
add +.0625 to the existing length and hit apply
measure it at 10.06252 in
repeat change size and type in 10.0625
measure it at 10.0625
repeat change size and type in 10 + .0625
and measure at 10.06252 in
It seems to mess up more when you do math but it also screws up entering a simple number
10.000325 usually ends up as 10.000315 in for me.
Editing the part directly from it's parameter dialog doesn't yield anything like this.
Why is it that individual views in an .idw always need to be updated? I will highlight a view, the thunderbolt icon lights up, I choose to update it, the view in the browser turns red and then the view up dates. if I highlight the view again it tells me the view needs to be updated again.
View 6 Replies View RelatedI've got a macro which is creating .ipt and .idw files from templates. I'm once created I'm replacing the reference in the .idw to refer to the newly created .ipt file. The problem is that the drawing view isn't updating... I've make the .ipt file dirty then udpate the drawing, but that hasn't worked. I've tried just using the drawingdocument.update function, but that hasn't worked either...
View 6 Replies View RelatedI am having issues with this. I create the part. I create the drawing. I add the part to the drawing. I make a modification to the part and then I select update(Lighting bolt) and NOTHING HAPPENS. Even when I did the local update.
I will review the rest of the thread tomorrow as I am leaving Inventor for today but this is bugging me!!
I can only see the change when I close the drawing and re-open it as of now.
note: When I do hit the update button it does shown the change for a split second then goes back to its previous state. Why does it not stay the new updated version? Inventor 2012
how I can update the physical properties for a part or assembly, from a drawing? My drawing template is showing the total weight for the current part/assembly, and I would love if Inventor could update this using iLogic, so I don't get the "N/A" value all the time.
View 5 Replies View RelatedI made iLogic for assembly and drawing, now i want to update drawing template parameters thru ilogic, as i already linked Fx(parameters) & iProperties to Template, but for updating template i need to close file and open again that file,
currently m using this method.
What is the solution for updating drawing template (like Model Description, Drawing no.).
Button to update the date in a drawing's IProperties and print a copy of the drawing.
View 2 Replies View Relatedas a part of automating manufacturing drawings, am trying to include ilogic code in the drawing , that would accept values from the user and store it as "user parameters" and make corresponding changes in the inventor drawing file.So, to replicate my issue on a smaller scale, i had created 2 parts and created an assembly out of these 2 parts. I used the assembly in my drawing.
In the Drawing i created a user parameter .. say "external_param". I am opening the drawing and changing the value of the user parameter through the (Fx) parameter table.
doc = ThisDoc.DocumentIf external_param >= 50 And external_param <= 99 ThenParameter("block_1.ipt.d0") = 15 'change the length of the blockParameter("block_1.ipt.d14") = 3 'change the number of holes in the blockElseIf external_param >= 100 And external_param <= 199 ThenParameter("block_1.ipt.d0") = 40Parameter("block_1.ipt.d14") = 5ElseIf external_param >= 200 And external_param <= 299 ThenParameter("block_1.ipt.d0") = 80Parameter("block_1.ipt.d14") = 6ElseIf external_param >= 300 And external_param <= 399 ThenParameter("block_1.ipt.d0") = 160Parameter("block_1.ipt.d14") = 9End IfRuleParametersOutput()iLogicVb.UpdateWhenDone = True'InventorVb.DocumentUpdate()
As you can see, i have commented out InventorVb.DocumentUpdate() , im not quite sure what would accomplish the update and save of the assembly document in the background (without prompting for a save/update). I have also tried thisDoc.Save and thisdoc.update. Using these 2 commands along with the InventorVb.DocumentUpdate() or iLogicVb.UpdateWhenDone caused Inventor to Crash.
I have two tables on a drawing one showing a parts list the other changes to dimensions.
The table to show the dimension changes is a configuration table pointing to an ipart.
iLogic is used to update the ipart but you have to right click to update the Active Member in the ipart to see the drawing update.
Is there a way to automate the 'update active member'? (on the ipart table - this does update the drawing)
I just have the one row in the table, it's purpose was to pass the values onto the drawing (as the part resizes I didn't want the dimensions moving so opted to tabulate them) - hoping they would update!
or
Is there a way to have a table update parametrically i.e. I've tried .csv as a source to the table but can't force an update. This way I could scrap the ipart & just import the values to a table.
The table also includes some txt comments which change with the ipart properties.
Sometimes I need to revise an assembly/part and I forget to open the drawing first and check a few things before I do. Inevitably my B-Hole employees (that's right, you know who you are if you are reading this! ) don't constrain their section lines and I end up losing a whole bunch of annotations that I then need to put back.
Is there a way to defer the updates to a drawing outside of the document settings for that drawing? I need to open this up, tie down their section lines, attach the detail cuts, etc. then get it to update.
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
I like to keep the properties of my drawing the same as those of my model. Currently I must remember to hit the "updat copied properties" button in the drawing to discard any old drawing properties and replace them with the properties from the model.
Is there any way to automate this task (perhaps on saving the drawing?) I presume an iLogic rule could be created in the drawing template, just not sure how to go about it.
Is it possible to open the part from the BOM?
If I remember correctly, at one point there was an option. Or maybe I mistake it with SW?
I'm using Inventor 2011 and when I go to change parameters using iLogic in an assembly model, (sometimes it is a component suppression, other times it is an iPart component change) it won't update the associated drawing file. I need to go into the BOM on the drawing and renumber the balloons, or change something else in order for the custom iProperties to update in the drawing template. If I just change the iPart component, then the BOM doesn't need to update making the renumbering of balloons redundant.
I'm using iLogic to update all of the iProperties and component references, then reattach balloons. What I would like to do is automatically update the custom iProperties drawing template fields, and renumber the drawing BOM.