When I attempt to place from Content Center some components, I receive the error message I attached:
"Unable to Update Content Part . Write permission is missing."
I receive this error not for all files.
When I insert a threaded part from the Content Center I get this message "unable to successfully update the member part file, problem occurred when setting thread data" The fastener will insert but the threads are very small.
View 7 Replies View RelatedI have some parts published in the Content Center. I need to modify a dimension on some parts. I can edit the family table and modify it. The new dimensions are right. But if I open an assembly which use older versions of the modified parts, when I try to update the Content Center parts, Inventor says all standard parts are up to date. When I insert the modified from the CC, I obtain the old version.
I don't have local versions of the part.
If I insert the part with option "Update standard parts when insert", I have the old version too.
I have already made these modification on other parts with no problem, what is wrong with this part ?
I use Inventor 2010 SP4.
A coworker brought this to my attention and I was also immediately able to reproduce this. We use content center C channels and other common beams a lot. After inserting one into an assembly if you right click and select change size and edit the length it typically doesn't update to the correct length.
Example:
Insert a 10" Ansi MC/C channel any size
right click and select change size
add +.0625 to the existing length and hit apply
measure it at 10.06252 in
repeat change size and type in 10.0625
measure it at 10.0625
repeat change size and type in 10 + .0625
and measure at 10.06252 in
It seems to mess up more when you do math but it also screws up entering a simple number
10.000325 usually ends up as 10.000315 in for me.
Editing the part directly from it's parameter dialog doesn't yield anything like this.
I'm using PS5.1. When I try to Save for Web & Devices I'm getting write permission errors. I haven't used this application for over a year, but it used to work fine.I also used the Mac Disk Utility to Repair Permissions.
View 1 Replies View RelatedNew user 2014
Part created in assembly does not update to part file.
How to do it?
I am using Inv/Vault Pro 2011.
I set up our company log which gets embossed on most parts as a sketch block in an .ipt. The .ipt contains nothing but the sketch block. To use it, the designer only needs to derive the Logo.ipt file into their part and then use the scale setting to set the derived block to the desired size for that part. The result is a scalable set of line geometry that can easily be used for extrusion or emboss that is standard for all users. It works beautifully, that is until you try to use it in a sheet metal part in 2012.
For some reason, when this same part, which works perfectly in normal parts, is derived into a sheet metal part an error pops up stating that, "Selected part does not have any geometry that can be derived." Say what?
I was able to find a workaround by directly copying the block into the sheet metal part, but you no longer have the ability to go back and scale it if needed. Even more strange, when the block was copied over, it could not be deleted from the new part.
Is this just a bug with 2012? Why does it work in a normal part but not sheet metal?
I have created the part based on piece of standard angle taken from library. Now I want to make a mirrored copy of this part by Component-Mirror.
Inventor does not let me do it with standard part.
The question is: How I can transform a standard part to normal one, I mean I could get rid of belonging to standard part? Making a copy does not work. The only way is to derive and mirror this part but I wish there could be easy way.
Ive made a little mistake while making a content center part.
Is there anyway to edit the Ipart that i published into the content center? there is a custom property in there that i would like to have deleted. Inventor 2013
I just created some new content center libraries for different grade bolts. I set up the part number and file number to read how I would like. When I add a bolt from my library the part name is not what I would like. It seems to be the Family Name followed by the Size Designation. Is there anyway I can get this to be the File Name that I modified in the Family Table?
View 1 Replies View RelatedWhen I place a part, such as a bolt, from the Content Center, it's immediately looking for the other half of an insert iMate. How do I make a part I created do that? I put an iMate in the part, but it had no effect.
It sure would save a bunch of time if this would work.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
I have a part published in my content center that was not authored with Tube & Pipe connections. I was wondering if there was a way to edit that part and re-publish it, or would I have to delete it from my Content Center.
View 2 Replies View RelatedI needed to make changes to an existing part that I had published into the CC a few days ago.
what I did was make the changes to the part that is on my local. Then selected the part in CC and RC'd on it and selected "Delete Family". I thought it was gone, but when I go to reinsert it into an assembly, I get this message.
This tells me it is located somewhere else in the CC under a different family. How do I find this other family and then remove it so I can get the updated version in the CC.
The new release has me baffled. Some of the b16.9 fittings are the wrong color. Is there a way to change them back to the old color?
The reducer and straight tee are oddly still the correct color, but the others are a lighter shade of gray.
When I click on a light gray fitting, the material and appearance say "Steel, Wrought; Steel". When I select the old darker color, it says "Wrought Steel; Metal-Steel."
I'd like to change this at the CC level instead of manually changing them in every assembly and design representation.
Autodesk Product Design Suite Ultimate 2014
Inventor Pro 2014 - SP1
Win7 Pro x64
Dell T5500; Xeon E5520 2.27GHz; 15 GB ECC RAM; Quaddro FX4800; SSD
There is no 1/4 x 1 x1 Angle in content center. Can this be fixed?
View 2 Replies View RelatedI did a (I think) standard install of product suite premium 2013 a while back and am trying my first flexible hose run.
When I hit populate I get an error message saying something like "your request cannot be fulfilled because parts can"t be fetched from the content centre"
Now I see a whole lot of libraries are not available. My only other experience with this was when the mold libraries were not part of the installation and I had to do a huge download.
As far as the missing mold libraries went, I felt that was something the vendor should really have told us about. But let me not get ahead of myself this time, even though it's midnight and I can't do at least 1 run to show for tomorrow.
I am using IV 2010. I am missing the metric items for content center. I have checkeed the filter for DIN and nothing appears. It looks like the only thing I can view is ANSI. How do I get the rest of the content center loaded?
View 1 Replies View RelatedI mostly use SAE and ANSI screws, bolts, pins and etc in my assemblies. It is tiresome to wade through the DIN, ISO, JAL and other components when looking for a particular inch bolt. Is there a way to unload the excess library listings?
View 3 Replies View Relatedhow to select Content Center Part Automatically. Now I use pick methode for select CC part.
Here's my code :
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click 'Membuat koneksi ke Inventor Dim m_invApp As Inventor.Application = Nothing m_invApp =
[Code]....
I have a part that was made from content center and modified further. I would like Inventor to no longer recognize this part as a content center part. It has been renamed and migrated to 2013 format, but still when inserting into an assembly the assembly recognizes it as a content center part in the browser.
Also, the browser title for the part will not update with the file name.
edit material of part taken from content center library. In library itself i have to change the material of item and specification of part. means i will get the all details in BOM.
View 1 Replies View RelatedA coworker of mine has made a bunch of custom extrusions, turned them into iParts, and published them to the Content Center. The parts are driven in length by the key parameter "Length". Unfortunately, he forgot to mark that "Length" parameter as export in the parameter dialogue before publishing. Is there ANY way to get that "Length" parameter to be exported so the Parts List can pull the cut length?
View 2 Replies View RelatedI've been tasked to turn our 2D cad dwgs to 3D in inventor.
I'm working on a frame at the moment, I got all the square and rectangular tube from the CC and constrained them to match the CAD dwg, now I need to add the mounting holes but if I add holes to one copy all the copies get the holes.
What option can I use to make each instance stand alone?
I am looking for a way to recognize a custom content Center part inside Inventor. The way I see it, I would like to fill a custom property with a value so I can set a seperate category inside Vault Pro for a custom Content Center part.
What I found is the following:
CustomContentCenter variabele: ContentCenter{844FDDD7-2E90-4E4C-8868-134CEAEDC078}
IsCustomPart 1
Is there any way that I can get this information inside an Custom Property?
I'm trying to use "Replace Family Template" to overwrite an iPart family in Content Center.I've made changes to the iProperties of the iPart and I want those new changes to be in Content Center.
When I RMB on the iPart in Content Center and click "Replace Family Template", I get the "Import Part Invalid" message.Should I be able to do what I'm trying to do?
I've run into an issue with the Content Center customization. I easily understand how to manipulate the table to create parts with our part numbers, different material spec, & other predetermined aspects of the included templates that were included with the Inventor 2012 update. The issue I'm running into is that we would like to add or modify the original part the table is referring to.
In my example pics there is a bushing that I would like to control the hex nut size on. In the model it was created with a tangent constraint within the sketch instead of a linear dimension from the two flat surfaces. I would like to change that, but keep getting error messages stating:
I am having some issues concerning updating drawings. When a part (.IPT) is placed in a drawing, everything is fine (ie. the views represented in the drawing are up-to-date). Yet, when I make a change to the part (something as small as a dimensional change) it does not translate through to the drawing. This is also the case for iProperties.
I have been playing around for a while now, but have had no luck. The part is also an iPart, but this shouldn't matter.
Create a Content Center Part that prompts for a file name and sets the Part Number to whatever I save the part as? It would also be nice to... Have the browser Display name the same as the saved filename.
If I have a standard part with a blank filename, inventor will make the part number equal the filename at the first save. It is this functionality that I require when using Custom Content parts.
E.G. If I have a length of 'RHS 200x100x6.3 - 2000mm' selected from content centre and I want the filename to be saved as 'Part-001', then I would like the Part Number to be set as 'Part-001'.
If I then place the same member in another project/assembly I may want to call it 'ProjectPart-100', where the part number would then be 'ProjectPart-100' and so on.
This method ignores the filename entry in the Ipart table.
I have created a new colum in family table editor for a custom part in content center. After that i created an assembly using the same custom part from contentr center. Then i prepared the drawing for that i mean *.idw. In the drawing file i have to attach a part list. and i need to add the the new colum generated in family table to part list.Do we have any option available to add the specified column in part list ?
Inventor Professional Suite 2010
Windows 7
For some reason when I start either the bolted connection generator or the shaft generator, the content center parts don't show up if I select "modify" to change the parts. For example: I wanted to create an axle with a retaining-ring-groove. I created the axle, and under Features I selected Retaining Ring.
Then a dialog shows up with some standard dimensions, and on the right under "Position" it says "ASME B 27.7M". When I click here, an empty dialogbox shows with filter "All" activated.
It should show all retaining rings available in the content center. The strange thing however is that when I exit this function and start the ordinary "Place from Content Center" command, I can see all retaining rings that are available (see pictures).
The same thing occurs when using the bolted connection generator.