AutoCAD Inventor :: Missing Content Center Libraries
May 16, 2013
I did a (I think) standard install of product suite premium 2013 a while back and am trying my first flexible hose run.
When I hit populate I get an error message saying something like "your request cannot be fulfilled because parts can"t be fetched from the content centre"
Now I see a whole lot of libraries are not available. My only other experience with this was when the mold libraries were not part of the installation and I had to do a huge download.
As far as the missing mold libraries went, I felt that was something the vendor should really have told us about. But let me not get ahead of myself this time, even though it's midnight and I can't do at least 1 run to show for tomorrow.
View 2 Replies
ADVERTISEMENT
Jul 16, 2012
First off, we're not using Vault or ADMS as it's simply not an option at the moment. Possibly down the line - we'll just have to see, but no time in the forseable future.
I had a custom library I created on my local machine, no problems, full read/write access works fine.
Turns out there are a couple of us that need to share the library. I figured, no big deal, we'll just go out on the server and create a folder and copy them all there. I did this and configured inventor to look the server for the files. All seemed OK. It saw the files and I can insert parts into assemblies, etc. Problem is, my custom library is no longer set to Read/Write. It will only do Read Only. If I create a new library to that location, it gets created, but still only lists as Read Only.
In searching here, my guess is it has to do with permissions, but what permissions are required on the file/directory to enable Read/Write access? I already have full access to that network folder and it's contents. Does some sort of system account need added to it? Unless it's simply not possible on a network location, i'm at a loss.
View 4 Replies
View Related
Jan 3, 2012
What is the most efficent way to share content center libraries between users? We do not use vault but do use project folders. It has been proposed to copy the CC to the server and then point the project files to that location?
Inventor 2012 Pro
Windows 7 64 bit
Core I5 2410M processor | GeForceGT 525M graphics card | 8G RAM
View 3 Replies
View Related
Nov 6, 2011
I installed Autodesk Inventor 2012 which I was able to download because I am a student. The version I downloaded however, did not install libraries for the Content Center. The first thing I though was that the Content Center was a feature reserved for purchased versions of the program, but when I head to the downloads section I saw a link to download Content Center Libraries.
I downloaded the ISO and ANSI libraries to try out, and placed them in the directory where Inventor is supposed to search for them. When I started up Inventor, the Content Center was still empty. How can I use the libraries? I suspect Inventor is not reading them because they are Inventor 2010 libraries, but I am unable to use the Update Tool - it appears greyed out.
View 9 Replies
View Related
Dec 7, 2012
we have Inventor prof 2012 lisc copy ,now we recd 2013 upgrade copy , as per discusswith local service provider of Autodesk need to uninstall whole 2012 and reload fresh 2013. i copied contenet center folder on other location and reload fresh Inventor 2013.when i installed it it is obserbed that content center libraries don't have standards which contents in Inventor 2012. To open our old projects we need this standards, the procedure to import this content center libraries from 2012 to 2013.
View 1 Replies
View Related
Mar 26, 2013
There is no 1/4 x 1 x1 Angle in content center. Can this be fixed?
View 2 Replies
View Related
Dec 26, 2013
I am using IV 2010. I am missing the metric items for content center. I have checkeed the filter for DIN and nothing appears. It looks like the only thing I can view is ANSI. How do I get the rest of the content center loaded?
View 1 Replies
View Related
Jun 5, 2013
As you can see, there is an entire face of the pipe missing. When I highlight over it (2nd picture) it thinks it is there. This has happened on lots of content center parts. There has been a few issues where this has happened with some of our downloaded user content (in our custom content center) even to the point of disappearing entirely.
This has happened across multiple (identical) machines. However, it doesn't seem to be reproducible on demand.
Pertinent info:
Inventor 2014 Pro, 64-Bit, Build 170, Update 1
Graphics - NVIDIA Quadro 2000 with latest current driver (Problem presented before driver update)
12GB RAM and Xeon Quad Core
View 7 Replies
View Related
May 31, 2012
how I can get the bolt type and sizes to show in the description of the item in a parts list when placed through Content Center! I would like the same with all fixings.
We have configured our own Content Center by copying standards and replacing the part number with our own reference number. This then shows the description as "Bolt" with no size etc.
Can Content Center be configured in a way to show sizes in description?
View 1 Replies
View Related
Jan 10, 2013
I want to find a rectangular flat section of about 250x200cm and a 150x100cm.Is that possible?
I have the content library of ANSI,JIS,GB,ISO and DIN but i can't find anything in these libraries.
View 3 Replies
View Related
Nov 20, 2011
Somehow the Content Center Filter clears all content while in ISO or DIN. Both libraries are turned on in project.
I can see only one custom library when either filter engaged. I also see both ISO and DIN parts when filter is off.
[URL] ........
View 4 Replies
View Related
Jun 1, 2012
I used to use the BSI content fine in my old version of Inventor, but on this years version there appears to be no BSI content. I have tried reinstalling the content center and all of the options are selected but still no BSI?
View 2 Replies
View Related
Nov 18, 2011
I can log into data managment services outside of inventor.
I can't log into content center or access frame generator from inventor.
INV 2009
View 1 Replies
View Related
Jun 22, 2012
I'm using a student version of inventor 2013, and i'm trying using the content center for add bolts at my project, but all the components are unable for my use, because everything are marked as read only.
How can i do for use these components? and other question, how can i create account at vault?
View 6 Replies
View Related
Oct 13, 2012
We have an extensive library of parts that we consistently utilize, but we do use Content Center for hardware and routed systems components.
All of our library parts have our company ERP's item number in the stock number iProperty, and the ERP's description in the Comments iProperty.
For CC items, we have added columns for these and mapped them to the appropriate iProperty.
Everything works great except for one thing.
Many of our ERP descriptions inlude inch marks, foot marks, and the & symbol. For our normal library parts thhis is not an issue. However, CC items utilize these characters differently. The result is our descriptions come out different that what is entered.
See the example below...
How to include these characters in the CC descriptions?
Inventor 2012 SP3 ~ Vault Pro 2013
==================
Lenovo D20 Workstation Intel Xenon E5640@2.67GHz (2)
Win 7, 24gb RAM, NVIDIA Quadro FX 3800
View 8 Replies
View Related
Jun 22, 2012
At my company we currently have a huge number of Autocad deployments for 2010,2011,2012. Right now our deployments weren't setup to include the content centers. I have installed 2012 Inventor on my personal computer as a trial version to grab the .idcl files. I was wondering if I would be able to just drag and drop these onto a server and have my co-workers point to the file location within inventor itself via options>content center>etc.
View 6 Replies
View Related
Nov 29, 2011
Two computers with Inventor Pro 2011 on them, same set up in Apllication Options/Content Center and Apllication Options/File. On one Inventor sees Content Center on the other does not. What could be the problem?
View 2 Replies
View Related
Jun 24, 2013
Installed 2014 recently, and now my Content Center has nothing in it. The "Place from Content Center" window loads, and there are no folders. My item count is 0. I've attached a screen shot for reference. Clicking the refresh button does nothing.
We have no custum hardware/materials/etc.
If I try to update the content center library (step 2), the Configure Libraries is full of "Not Available"s. Again, I've attached a screen shot. I'm nervous to continue migrating with out all that info.
There are two pc's with IV, and the content center is working fine on the other pc. The CC is a local thing, and only my computer seems to be upset.
View 4 Replies
View Related
Mar 24, 2012
I want to make a customized channel with all the dimesnions fixed - except A and G (variables). See attached screen shot.
View 1 Replies
View Related
Jul 24, 2013
I just created an empty Fastenal Library, and it is set to Read/Write. We order most of our fasteners from them, but not much else, so I used "Copy Category Structure To" Fastenal. I created a plain washer to add to the library, but when I try to publish it, I can't get it to work.
When I "Publish Part," I select Fastenal and English, then am asked to select a category to publish to. The Washers folder is greyed out, along with most other folders, but the Ball sub folder is not. I can't select Plain, which is what I need, but I can select Ball.
Also, is there a way to delete sub folders? I right click on Pins or Rivets, and the option to Delete Category is greyed out.
View 1 Replies
View Related
Feb 9, 2012
I have been working on creating custom content center families that will populate our company's part numbers and descriptions into the browser and drawing BOM. I have been quite successful in this except with the material. I've created custom materials for the fasteners that have the specified strengths and finishes per the fastener. By doing this I've created a different problem.
How can I create a custom property that will insert a specified value for material into the BOM? I've tried to change the link for Project.Material and then the part inserts as Inventor's default. I don't think creating individual material styles for each fastener is a viable one since I'll end up with duplicate style names.
IV 2012
Running on:
Windows 7 64 bit
12 GB Ram
Intel Xeon processer
View 3 Replies
View Related
Aug 6, 2013
Where I can get a pdf of the standard Content Center Library? Just a list of all the parts and sizes along with nomenclature.
Dell XPS 8300
Intel(R) Core(TM) i7-2600 CPU@3.40GHz
16GB RAM
Win 8.1 Pro
Autodesk Product Design Suite 2014
View 4 Replies
View Related
Oct 5, 2012
I am using content center for fasteners I want for my assembly.However, when I close the assembly drawing and try to reopen it, the link has been lost between the assembly and the fasteners and I am unable to find them.
I have created a project file before I start the assignment thinking this will solve the linkage problem but no luck.
View 3 Replies
View Related
Mar 11, 2011
I'm trying to create a custom Content Center bolt that can be one of three different materials (6.8, 8.8, 10.9). The materials are stored in our Styles Library, and the project specifies "Use Styles Library = Yes"; so the three materials are visible from the Content Center Editor. The Material column in the Content Center Editor is defined to "Map To Inventor Property: Project.Material". Everything looks fine. But no matter what material I select, I get 6.8.
I've already got LOTS of parts published with custom materials and they all work fine, but the big difference is that these families are all the SAME material. I'm having problems with getting a family to use DIFFERENT materials. We're using Inventor 2009.
View 6 Replies
View Related
Mar 26, 2013
I'm looking for a 2" x 1" x 3/16" bar channel in the Content Center but I cannot find anything smaller than 3" x 1.41" x 0.17". I've been looking under Structural Shapes > Channels. Am I missing content from the Content Center? Or does this just not exist in the Content Center?
View 6 Replies
View Related
Feb 2, 2013
I'm very new to Autodesk Inventor 2013.I'm working on a small project on my laptop at school. Recently I tried to work on this project at home. So I put everything on a Memory Stick, plugged it in at home and opened the file as usual. The problem is that the file needs references to the content center parts like screws etc. and can't find them. I was looking through my whole computer for this content center files Inventor is asking me, but I can't find them.
If I open a new project and open the content center it works without problems. The problem is just that I can't tell Inventor where the parts are to which it needs to be referenced.
View 3 Replies
View Related
Mar 9, 2012
I am just starting to make assembly parts from the content center and have found that for the most it is useful. Unfortunately I have found that when these parts are placed in the assembly and a drawing is make of the assembly the bill of material lists total inches of a structural member rather than quantity of piece parts in the quantity column. Thus a 10" tube shows a QTY. of 100 in. rather than 10 piece parts. I have removed the check to export B_L in the function menu but that does not solve my problem. Is there a way to get this to read quantity of piece parts and not total length of material used?
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
View 1 Replies
View Related
Apr 18, 2013
We have upgraded from Inventor 2012 to 2013 in August and my company never uses the Content Center, but I need it now and when I opened it up, the center is empty. I need bolt and washers and its empty. I tried linking the libraries folder to the Content Center link but nothing.
View 8 Replies
View Related
Oct 30, 2012
I have re-installed the content center. we do not use the vault even though i had to install the basic to install the content center see attached for my file settings for the content center.
View 9 Replies
View Related
Feb 2, 2012
I've never set up a custom content center before and I've done some research on the forums but I could really find the information I was looking for. My goal is to change the stock number and description to our company standard. Right now I edit it with the bom editor which is a bit time consuming. Another goal i would like would be that the part number is always the file name.
-Autodesk Inventor Professional 2010
View 5 Replies
View Related
Aug 2, 2012
I'm working on creating a customized content center for my company. I am having a problem with one of the CC parts. My process of operation is as follows. Change project file to default. Make sure Library View is on Merged View. Then I select the part that I need. RC copy to our project file. Revise the Part Numbers to match our part numbers then ok. Go to place in an assembly drawing and as soon as you click on the part Inventor crashes. It seems to be only on particular part. All of the other items I have place (over 50 or more) into our customized content center work fine, but not this one.
It seems that whenever I set a key column to be "Part Number" it crashes. If I have any other key columns selected (minus part number column) it works fine. I've also tried creating my own column that says part number and when that one is selected it still crashes. The part that I am having an issue with is the Slotted Hex Head Machine Screw - Inch. Also we are still running 2010 with service pack 4 I do believe.
View 9 Replies
View Related
