edit material of part taken from content center library. In library itself i have to change the material of item and specification of part. means i will get the all details in BOM.
View 1 RepliesI can not get the colors set to material in the content center. These are the steps I followed.
1) start new .Ipt => finish sketch.
2) go to "material browser"=> click "create new material in document"
3) edit new material => name "Steel Green " => generic color choose green. => OK.
4) add new material to your custom library or to the "Inventor Material Library". (custom library is in project file)
5) close document
6) go to Tools => Editor => Family Table => Column material Properties => choose "Steel Green".
7) Ok, publish OK.
8) new assembly => place from content => get the new material.
9) check properties. Material is Assigned but not the color
I am working on creating custom structural steel content libraries for our company. One thing that I would like to do is to have the content center create a new part with the xy plane as the midplane of the resultant part. By default, the xy plane is at one end of the part. I turned on the xy plane in the part shown in this screen shot.
View 5 Replies View RelatedIt occurs when a user tries to run AutoCAD 2013.
And returns the error
"Unhandled Exception E0434352 at address FE0DCACDh"
Ive made a little mistake while making a content center part.
Is there anyway to edit the Ipart that i published into the content center? there is a custom property in there that i would like to have deleted. Inventor 2013
I just created some new content center libraries for different grade bolts. I set up the part number and file number to read how I would like. When I add a bolt from my library the part name is not what I would like. It seems to be the Family Name followed by the Size Designation. Is there anyway I can get this to be the File Name that I modified in the Family Table?
View 1 Replies View RelatedWhen I place a part, such as a bolt, from the Content Center, it's immediately looking for the other half of an insert iMate. How do I make a part I created do that? I put an iMate in the part, but it had no effect.
It sure would save a bunch of time if this would work.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
I have a part published in my content center that was not authored with Tube & Pipe connections. I was wondering if there was a way to edit that part and re-publish it, or would I have to delete it from my Content Center.
View 2 Replies View RelatedI needed to make changes to an existing part that I had published into the CC a few days ago.
what I did was make the changes to the part that is on my local. Then selected the part in CC and RC'd on it and selected "Delete Family". I thought it was gone, but when I go to reinsert it into an assembly, I get this message.
This tells me it is located somewhere else in the CC under a different family. How do I find this other family and then remove it so I can get the updated version in the CC.
The new release has me baffled. Some of the b16.9 fittings are the wrong color. Is there a way to change them back to the old color?
The reducer and straight tee are oddly still the correct color, but the others are a lighter shade of gray.
When I click on a light gray fitting, the material and appearance say "Steel, Wrought; Steel". When I select the old darker color, it says "Wrought Steel; Metal-Steel."
I'd like to change this at the CC level instead of manually changing them in every assembly and design representation.
Autodesk Product Design Suite Ultimate 2014
Inventor Pro 2014 - SP1
Win7 Pro x64
Dell T5500; Xeon E5520 2.27GHz; 15 GB ECC RAM; Quaddro FX4800; SSD
I mostly use SAE and ANSI screws, bolts, pins and etc in my assemblies. It is tiresome to wade through the DIN, ISO, JAL and other components when looking for a particular inch bolt. Is there a way to unload the excess library listings?
View 3 Replies View Relatedhow to select Content Center Part Automatically. Now I use pick methode for select CC part.
Here's my code :
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click 'Membuat koneksi ke Inventor Dim m_invApp As Inventor.Application = Nothing m_invApp =
[Code]....
I have a part that was made from content center and modified further. I would like Inventor to no longer recognize this part as a content center part. It has been renamed and migrated to 2013 format, but still when inserting into an assembly the assembly recognizes it as a content center part in the browser.
Also, the browser title for the part will not update with the file name.
A coworker of mine has made a bunch of custom extrusions, turned them into iParts, and published them to the Content Center. The parts are driven in length by the key parameter "Length". Unfortunately, he forgot to mark that "Length" parameter as export in the parameter dialogue before publishing. Is there ANY way to get that "Length" parameter to be exported so the Parts List can pull the cut length?
View 2 Replies View RelatedI've been tasked to turn our 2D cad dwgs to 3D in inventor.
I'm working on a frame at the moment, I got all the square and rectangular tube from the CC and constrained them to match the CAD dwg, now I need to add the mounting holes but if I add holes to one copy all the copies get the holes.
What option can I use to make each instance stand alone?
I am looking for a way to recognize a custom content Center part inside Inventor. The way I see it, I would like to fill a custom property with a value so I can set a seperate category inside Vault Pro for a custom Content Center part.
What I found is the following:
CustomContentCenter variabele: ContentCenter{844FDDD7-2E90-4E4C-8868-134CEAEDC078}
IsCustomPart 1
Is there any way that I can get this information inside an Custom Property?
I'm trying to use "Replace Family Template" to overwrite an iPart family in Content Center.I've made changes to the iProperties of the iPart and I want those new changes to be in Content Center.
When I RMB on the iPart in Content Center and click "Replace Family Template", I get the "Import Part Invalid" message.Should I be able to do what I'm trying to do?
I've run into an issue with the Content Center customization. I easily understand how to manipulate the table to create parts with our part numbers, different material spec, & other predetermined aspects of the included templates that were included with the Inventor 2012 update. The issue I'm running into is that we would like to add or modify the original part the table is referring to.
In my example pics there is a bushing that I would like to control the hex nut size on. In the model it was created with a tangent constraint within the sketch instead of a linear dimension from the two flat surfaces. I would like to change that, but keep getting error messages stating:
I am facing problem with editing content center library. Find attached file for more details. soft ware is asking for read / write library. I have 2011 version there is only read only option.
What will i have to do for the same.
I have created a new colum in family table editor for a custom part in content center. After that i created an assembly using the same custom part from contentr center. Then i prepared the drawing for that i mean *.idw. In the drawing file i have to attach a part list. and i need to add the the new colum generated in family table to part list.Do we have any option available to add the specified column in part list ?
Inventor Professional Suite 2010
Windows 7
For some reason when I start either the bolted connection generator or the shaft generator, the content center parts don't show up if I select "modify" to change the parts. For example: I wanted to create an axle with a retaining-ring-groove. I created the axle, and under Features I selected Retaining Ring.
Then a dialog shows up with some standard dimensions, and on the right under "Position" it says "ASME B 27.7M". When I click here, an empty dialogbox shows with filter "All" activated.
It should show all retaining rings available in the content center. The strange thing however is that when I exit this function and start the ordinary "Place from Content Center" command, I can see all retaining rings that are available (see pictures).
The same thing occurs when using the bolted connection generator.
I am new to inventor and am trying to autodrop sos 632-8 from then content center into a sheet metal part. I have correct holesfor this (.213") but it just will not autodrop. I can drop a screw in the same hole which makes me feel like there is some issue with the pem fasterners.
View 1 Replies View RelatedI'm making my first iAssemblies and have run into a strange problem.
I have the option to add the Table Replace column for iParts, but this option isn't avialeble for parts inserted from content center.
I'm trying to create a content center part with a decal attached to the model. The problem I am facing it that the decal is not adjusting in size when the ipt is placed from the content center. The decal does adjust in the original ipt.
View 2 Replies View RelatedI'm looking for a way to change the size of a custom content center part via ilogic. I found a way to replace them on this forum but this is not ideal for, because that creates a new part every time i change the size of the part.
View 2 Replies View RelatedI have created a new item in content center in my personnel library. When i am creating a new item in content center its creating *.ipt file somewhere ? If so from which location i can open the part file ?
View 3 Replies View RelatedWhen I insert a threaded part from the Content Center I get this message "unable to successfully update the member part file, problem occurred when setting thread data" The fastener will insert but the threads are very small.
View 7 Replies View RelatedWhen inserting a content center part for which we have to choose a material, we would like to have a custom material as a default (material with name: "No material selected"). So when selecting no material for this part (for example when the user forgets to select a specific material), the default material (in this case material "No material selected") will be active. In this way, we can see in one view across the BOM which parts have no material assigned yet.
How can this be achieved in the content center (editor)?
Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
A coworker brought this to my attention and I was also immediately able to reproduce this. We use content center C channels and other common beams a lot. After inserting one into an assembly if you right click and select change size and edit the length it typically doesn't update to the correct length.
Example:
Insert a 10" Ansi MC/C channel any size
right click and select change size
add +.0625 to the existing length and hit apply
measure it at 10.06252 in
repeat change size and type in 10.0625
measure it at 10.0625
repeat change size and type in 10 + .0625
and measure at 10.06252 in
It seems to mess up more when you do math but it also screws up entering a simple number
10.000325 usually ends up as 10.000315 in for me.
Editing the part directly from it's parameter dialog doesn't yield anything like this.
When using Inventor with Vault, we have a problem when categorizing custom content center parts in Vault. In short, custom content center parts are incorrectly categorized as "Content Center" and automatically released - as there is no property that we can use to identify these files.
I need iLogic code to trigger when custom content center files are created/saved, wich adds the following custom iproperty "IsCustomContentCenter=True".
Somehow the Content Center Filter clears all content while in ISO or DIN. Both libraries are turned on in project.
I can see only one custom library when either filter engaged. I also see both ISO and DIN parts when filter is off.
[URL] ........