I am working on creating custom structural steel content libraries for our company. One thing that I would like to do is to have the content center create a new part with the xy plane as the midplane of the resultant part. By default, the xy plane is at one end of the part. I turned on the xy plane in the part shown in this screen shot.
View 5 Replies
[URL]
I have begun the creation of a new custom content center library because the old one was or became corrupted during our migration from from Inventor 2011 to 2013. The old custom library was un-recoverable. The creation of a custom content center library, adding components to the the custom library and working with the file tables adding columns for part description etc.. is rather easy. Refreshing legacy content center files has been rather difficult. In some cases I needed to delete the legacy files and them re-insert them manually. This process is rather time consuming. What I would like to do is to create all the files in the family table after I have made the changes to the family talble.
I can not get the colors set to material in the content center. These are the steps I followed.
1) start new .Ipt => finish sketch.
2) go to "material browser"=> click "create new material in document"
3) edit new material => name "Steel Green " => generic color choose green. => OK.
4) add new material to your custom library or to the "Inventor Material Library". (custom library is in project file)
5) close document
6) go to Tools => Editor => Family Table => Column material Properties => choose "Steel Green".
7) Ok, publish OK.
8) new assembly => place from content => get the new material.
9) check properties. Material is Assigned but not the color
edit material of part taken from content center library. In library itself i have to change the material of item and specification of part. means i will get the all details in BOM.
View 1 Replies View RelatedIt occurs when a user tries to run AutoCAD 2013.
And returns the error
"Unhandled Exception E0434352 at address FE0DCACDh"
When inserting a content center part for which we have to choose a material, we would like to have a custom material as a default (material with name: "No material selected"). So when selecting no material for this part (for example when the user forgets to select a specific material), the default material (in this case material "No material selected") will be active. In this way, we can see in one view across the BOM which parts have no material assigned yet.
How can this be achieved in the content center (editor)?
Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
Somehow the Content Center Filter clears all content while in ISO or DIN. Both libraries are turned on in project.
I can see only one custom library when either filter engaged. I also see both ISO and DIN parts when filter is off.
[URL] ........
I used to use the BSI content fine in my old version of Inventor, but on this years version there appears to be no BSI content. I have tried reinstalling the content center and all of the options are selected but still no BSI?
View 2 Replies View RelatedI can log into data managment services outside of inventor.
I can't log into content center or access frame generator from inventor.
INV 2009
I'm using a student version of inventor 2013, and i'm trying using the content center for add bolts at my project, but all the components are unable for my use, because everything are marked as read only.
How can i do for use these components? and other question, how can i create account at vault?
We have an extensive library of parts that we consistently utilize, but we do use Content Center for hardware and routed systems components.
All of our library parts have our company ERP's item number in the stock number iProperty, and the ERP's description in the Comments iProperty.
For CC items, we have added columns for these and mapped them to the appropriate iProperty.
Everything works great except for one thing.
Many of our ERP descriptions inlude inch marks, foot marks, and the & symbol. For our normal library parts thhis is not an issue. However, CC items utilize these characters differently. The result is our descriptions come out different that what is entered.
See the example below...
How to include these characters in the CC descriptions?
Inventor 2012 SP3 ~ Vault Pro 2013
==================
Lenovo D20 Workstation Intel Xenon E5640@2.67GHz (2)
Win 7, 24gb RAM, NVIDIA Quadro FX 3800
At my company we currently have a huge number of Autocad deployments for 2010,2011,2012. Right now our deployments weren't setup to include the content centers. I have installed 2012 Inventor on my personal computer as a trial version to grab the .idcl files. I was wondering if I would be able to just drag and drop these onto a server and have my co-workers point to the file location within inventor itself via options>content center>etc.
View 6 Replies View RelatedTwo computers with Inventor Pro 2011 on them, same set up in Apllication Options/Content Center and Apllication Options/File. On one Inventor sees Content Center on the other does not. What could be the problem?
View 2 Replies View RelatedInstalled 2014 recently, and now my Content Center has nothing in it. The "Place from Content Center" window loads, and there are no folders. My item count is 0. I've attached a screen shot for reference. Clicking the refresh button does nothing.
We have no custum hardware/materials/etc.
If I try to update the content center library (step 2), the Configure Libraries is full of "Not Available"s. Again, I've attached a screen shot. I'm nervous to continue migrating with out all that info.
There are two pc's with IV, and the content center is working fine on the other pc. The CC is a local thing, and only my computer seems to be upset.
I want to make a customized channel with all the dimesnions fixed - except A and G (variables). See attached screen shot.
View 1 Replies View RelatedI just created an empty Fastenal Library, and it is set to Read/Write. We order most of our fasteners from them, but not much else, so I used "Copy Category Structure To" Fastenal. I created a plain washer to add to the library, but when I try to publish it, I can't get it to work.
When I "Publish Part," I select Fastenal and English, then am asked to select a category to publish to. The Washers folder is greyed out, along with most other folders, but the Ball sub folder is not. I can't select Plain, which is what I need, but I can select Ball.
Also, is there a way to delete sub folders? I right click on Pins or Rivets, and the option to Delete Category is greyed out.
I have been working on creating custom content center families that will populate our company's part numbers and descriptions into the browser and drawing BOM. I have been quite successful in this except with the material. I've created custom materials for the fasteners that have the specified strengths and finishes per the fastener. By doing this I've created a different problem.
How can I create a custom property that will insert a specified value for material into the BOM? I've tried to change the link for Project.Material and then the part inserts as Inventor's default. I don't think creating individual material styles for each fastener is a viable one since I'll end up with duplicate style names.
IV 2012
Running on:
Windows 7 64 bit
12 GB Ram
Intel Xeon processer
Where I can get a pdf of the standard Content Center Library? Just a list of all the parts and sizes along with nomenclature.
Dell XPS 8300
Intel(R) Core(TM) i7-2600 CPU@3.40GHz
16GB RAM
Win 8.1 Pro
Autodesk Product Design Suite 2014
I am using content center for fasteners I want for my assembly.However, when I close the assembly drawing and try to reopen it, the link has been lost between the assembly and the fasteners and I am unable to find them.
I have created a project file before I start the assignment thinking this will solve the linkage problem but no luck.
I'm trying to create a custom Content Center bolt that can be one of three different materials (6.8, 8.8, 10.9). The materials are stored in our Styles Library, and the project specifies "Use Styles Library = Yes"; so the three materials are visible from the Content Center Editor. The Material column in the Content Center Editor is defined to "Map To Inventor Property: Project.Material". Everything looks fine. But no matter what material I select, I get 6.8.
I've already got LOTS of parts published with custom materials and they all work fine, but the big difference is that these families are all the SAME material. I'm having problems with getting a family to use DIFFERENT materials. We're using Inventor 2009.
I'm looking for a 2" x 1" x 3/16" bar channel in the Content Center but I cannot find anything smaller than 3" x 1.41" x 0.17". I've been looking under Structural Shapes > Channels. Am I missing content from the Content Center? Or does this just not exist in the Content Center?
View 6 Replies View RelatedI'm very new to Autodesk Inventor 2013.I'm working on a small project on my laptop at school. Recently I tried to work on this project at home. So I put everything on a Memory Stick, plugged it in at home and opened the file as usual. The problem is that the file needs references to the content center parts like screws etc. and can't find them. I was looking through my whole computer for this content center files Inventor is asking me, but I can't find them.
If I open a new project and open the content center it works without problems. The problem is just that I can't tell Inventor where the parts are to which it needs to be referenced.
I am just starting to make assembly parts from the content center and have found that for the most it is useful. Unfortunately I have found that when these parts are placed in the assembly and a drawing is make of the assembly the bill of material lists total inches of a structural member rather than quantity of piece parts in the quantity column. Thus a 10" tube shows a QTY. of 100 in. rather than 10 piece parts. I have removed the check to export B_L in the function menu but that does not solve my problem. Is there a way to get this to read quantity of piece parts and not total length of material used?
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
We have upgraded from Inventor 2012 to 2013 in August and my company never uses the Content Center, but I need it now and when I opened it up, the center is empty. I need bolt and washers and its empty. I tried linking the libraries folder to the Content Center link but nothing.
View 8 Replies View RelatedI have re-installed the content center. we do not use the vault even though i had to install the basic to install the content center see attached for my file settings for the content center.
View 9 Replies View RelatedI've never set up a custom content center before and I've done some research on the forums but I could really find the information I was looking for. My goal is to change the stock number and description to our company standard. Right now I edit it with the bom editor which is a bit time consuming. Another goal i would like would be that the part number is always the file name.
-Autodesk Inventor Professional 2010
I'm working on creating a customized content center for my company. I am having a problem with one of the CC parts. My process of operation is as follows. Change project file to default. Make sure Library View is on Merged View. Then I select the part that I need. RC copy to our project file. Revise the Part Numbers to match our part numbers then ok. Go to place in an assembly drawing and as soon as you click on the part Inventor crashes. It seems to be only on particular part. All of the other items I have place (over 50 or more) into our customized content center work fine, but not this one.
It seems that whenever I set a key column to be "Part Number" it crashes. If I have any other key columns selected (minus part number column) it works fine. I've also tried creating my own column that says part number and when that one is selected it still crashes. The part that I am having an issue with is the Slotted Hex Head Machine Screw - Inch. Also we are still running 2010 with service pack 4 I do believe.
Why can't Autodesk be more consistent? I'm trying to use Part Number in my Description Field in Family Table.
I.e.. Hex head bolt : DIN 931-1 - M6 x 60
Countersunk bolt : M4 x 20 DIN 7991
Why the switch???
Is it possible to publish an assembly to the content center?
Dell Precision T3500
Intel(R) Xeon(R) CPU W3530 @2.8GHz
ATI FIrePRo V5800 (FireGL V)
12 GB Ram
64 BIt OS
Once you publish an item to the content center if you want to remove it how is this done?
View 4 Replies View RelatedI want to insert a conical slot in a part file, or a part in an assembly which i edit in place.
I was told to activate content center, but how?
I don't find the button.
