AutoCAD Inventor :: Change Select Set Face Colour Simultaneously?
Mar 19, 2013
Is there any way to change the colour of all faces in a select set simultaneously?
The method I am referring to is when you select faces in a part document, rickt click and select properties from the context menu, a dialog box pops up called "Face Properties" which prompts you to select a colour and click OK. when this is done all of the faces are changed at once.
How do I replicate this via the API?
Currently I have it iterate through each face in a part document and apply the colour override one by one which can take a while when there are about 1000 faces. You can see each face changing as you go.
View 3 Replies
ADVERTISEMENT
Apr 24, 2012
is there away to change the colour of a face on a 3d solid?
i just want the top face a different colour to the rest if that makes any sence
im working in AutoCAD 2012
View 3 Replies
View Related
Aug 1, 2013
I have an assembly with multiple parts.
I wish to change the colour (how they're displayed) of a few of them.
When i right click on the part, i can select iProperties>Occurrence>Appearance
When i control + select multiple items, then right click, the Appearance tab is greyed out.
Not a huge problem at the moment, but in future, I may wish to make 30 + different parts a different colour and would like to do it in one step.
View 3 Replies
View Related
Mar 6, 2012
I need to be able to pick a face on a part in an assembly inside a iLogic rule. How can I set up the events to suspend the code to have the user pick the face?
View 6 Replies
View Related
Nov 8, 2012
I am making a C# Add-in, I need to create a plane from a selected face, I am using the following code, but I am getting stuck.
if (((mApp.ActiveDocument != null)))
{
if ((mApp.ActiveDocument.DocumentType == DocumentTypeEnum.kPartDocumentObject))
{
PartComponentDefinition oPartCom = mApp.ActiveDocument as PartComponentDefinition;
PartDocument oDoc = mApp.ActiveDocument as PartDocument;
[code].......
View 2 Replies
View Related
Dec 12, 2011
This has happened since I updated to 2012 Professional. When I want to use the measure tool or add constrains in assembly mode, the face/edge preview does not show up in red under Select Component Priority. I have to wait for the select other option to come up to see which face I am on. If I click on the face or edge it will show up but not until I do. I don't remember changing any settings that would cause this. I could have the select other option delay set to zero or I could change it to another selection priority but I don't remember having to do that before.
View 2 Replies
View Related
Jan 9, 2013
There are instances where we need to add an extrusion in an assembly (.iam) to show labeling that needs to be done on the floor during assembly.
So we do a new sketch to the face where we need to add the "label", we use text and extrude it 0.001" deep (cut).
On the drawing (.idw) you can see it no problem, but in the model (.iam) itself it's hard to see since the faces that result from the extrusion are the same color as the participant part.
My question is this: Is it possible to change the color of the face of the extrusion?
It's not super important but it would be a good thing to show that detail as we sometimes print a color version of the 3D view for prototyping, troubleshooting, etc.
View 9 Replies
View Related
Feb 8, 2013
I am constructing a skateboard truck and would like to know how to change the angle of the circle face in the first picture to be at the same angle of the face in the second picture. The highlighted areas have been coloured gold. I have attached the ipt file below.
View 6 Replies
View Related
Mar 14, 2012
I have a circular pattern. Is it possible to change the face color on the surface of the feature and have it reflected on all the other features?
View 6 Replies
View Related
Jan 29, 2013
I was wondering if there is a way to change the appearance of a face in a weldment assembly environment. I have a weldment which in the machining process a part of weld bead as well as a portion of one of the components is machined down (spot faced) and I need to change the appearance of those face to polished, but it doesn't let me do that?
View 3 Replies
View Related
Jul 12, 2013
How to change colour globally?
View 5 Replies
View Related
Sep 14, 2012
I have embossed text onto a part face with an assigned colour of white (main part colour is black). That is all fine in the part model, and indeed when I use that part in a sub-assembly. But, when I use that sub-assembly in a larger top-level assembly the text is black (which doesn't show up too well on a black background ). I must be missing something in a setting but I can't find it. As a test I brought another white-on-black embossed part into the same top-level assembly and that is absolutely fine.
View 2 Replies
View Related
Nov 22, 2011
Is it possible to change the colour of User Workplanes in IV 2011?
Autodesk Inventor 2013-64Bit Edition
Intel Xeon W3520 @ 2.67GHz
Win 7 Pro
6.7 System Rating
NVIDIA Quadro FX 1800
View 1 Replies
View Related
Jun 11, 2013
how can I change different colour in a assembly drawing. That means in a single drawing there is so many parts assembled I want to change the different parts in a different colour.
View 1 Replies
View Related
Jun 10, 2012
I have little question that, is it possible to change background colour of drawing sheet in inventor?
I have to change background colour white to black ( as in autocad) .
If it is possible pls where is setting in how to do it?.
View 3 Replies
View Related
Feb 3, 2012
I can't to change colour scheme autodesk inventor 2012
View 2 Replies
View Related
Oct 15, 2012
There is any option to merge bottom face of pad eye and pipe curved face... Something like
1. Extrude face to a surface or
2. like notch option available in frame generator ?
N:B - pad eye is made by extrusion and pipe made by frame generator.
View 2 Replies
View Related
Jun 4, 2013
I would like to be able to select a colour like you can in photoshop. The swatches are very limited. I would like to select it from the colour 'wheel', where you can move up and down the slider to select the value and then move over the circle to select your colour? Or where can I find a huge swatch of colours?
View 4 Replies
View Related
Aug 22, 2012
All I need to do is merge a circular face to a flat face, so both faces become one continuous face. Is this possible at all?
I have a attached a screenshot to show what I mean. Face 1 needs to be merged with face 2. This is so if I constrain anything to that face it will constrain to the entire face and not either the circular face OR the flat face.
View 3 Replies
View Related
May 3, 2012
I have an assembly with multible parts which all have iLogic rules in them. I want to controle when the rules are executed in each part, thus I have set them as "Don't run automatically". These rules are iTriggered by the top assembly, if they are active.
Is there a possibility of how I can run multiple rules simultaneously?
The code below is an example of the controle rule that determines the rules to be run but it takes one rule at the time...
IfComponent.IsActive("5580 Heating element package 1")=TrueThen
iLogicVb.RunRule("5580 Heating element basket 1", "iTriggerRule")
EndIf
IfComponent.IsActive("5580 Heating element package 2")=TrueThen
iLogicVb.RunRule("5580 Heating element basket 2", "iTriggerRule")
EndIf
.
.
.
up to x
I have also tried with For - Next statements...But the rules are run in the order that tey are written...
As the computer has a lot of memory in reserve; I want somehow all the iTriggerRules to be run at the same time as this would save a lot of time.
View 2 Replies
View Related
Nov 4, 2013
is it possible to change the colour of all elements in a pattern without changing the ipt file?
I have an assembly that has 4 rectangular patterns that can have any number of elements, sometimes the customer will ask for coating to be applied, in this case i only want to change the colour at the assembly level only.
View 1 Replies
View Related
Feb 16, 2012
I was wondering if there is a macro for printing and PDFing a drawing simulataneously so I don't have to essentially print the same drawing twice. I have done a little research thus far and have turned up nothing. They don't have to necessarily print and pdf at the same time, rather have one print and then the other PDF (or vice versa) once completed?
View 5 Replies
View Related
Apr 16, 2011
Using autocad 2008
There is a cube.
Solidedit --> Face --> Extrude
I place the pickbox on the front side of the cube, press down Ctrl which highlights the front face, then while still pressing down Ctrl, I press space bar to make the highlight jump to the back face. But when I click it with the mouse, the front face gets selected!
View 1 Replies
View Related
May 21, 2012
In any given shaded visual style, is there a way to select solids by their edges rather than the face? Ideally I would like to have X-Ray visual style turned on and be able to select objects in the background through objects in the foreground. This used to be possible in AutoCAD 2006, but I can't find any variable in AutoCAD 2011 to achieve this.
View 9 Replies
View Related
Mar 2, 2013
I have been able to draw the precast concrete tanks I needed. I drew several models and saved them as WBLOCKS to insert in new drawings. The problem is that I don't seem to be able to select a particular face of the tank upon which I want to align the UCS. What am I missing with regard to blocks and UCS alignment?
View 2 Replies
View Related
Jan 15, 2013
Say I draw a mesh sphere and I do the Split Mesh Face. Why am I fail to select the mesh face to split? It only allows me to pick the lines.
View 1 Replies
View Related
Aug 11, 2013
How do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
View 4 Replies
View Related
Aug 1, 2012
Is there a way to pick (16) hex bolt from the content center in any model and change the length of them all at the same time.
View 1 Replies
View Related
Aug 31, 2011
I want to change 'mutil value select" to "custom value input" in ilogic user parameters. something like this:
if condition A then
multivalue.setlist("length", 1,2,3,4,5)
else
(users can enter any value they want, how can i remove the list first and set it to custom value input?)
View 2 Replies
View Related
Aug 17, 2012
I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
View 3 Replies
View Related
Jun 8, 2008
What is the best way to select round the borders of a face?
I've been teaching myself to do this using the magic wand, but it's quite time consuming - lots of undoing, trying different tolerance settings, zooming in/out, using polygonal lasso to 'add to selection' the deselected areas etc
Because the hair is dark and the skin is light it seems like quite a long process?
So I'm wondering if this is the best way, and how the pros do it? eg Would they just manually draw round the edges?
View 1 Replies
View Related