Maya Modeling :: Edit Mesh Menu And Select Split Polygon Tool
Jun 3, 2011I am a newbie, and doing the helmet tutorial. It is asking me to go to the edit mesh menu and select the split polygon tool. It isn't there. where is it.
View 5 Replies
ADVERTISEMENT
Maya Modeling :: Polygon Split Tool Does Not Split All Polygons
Sep 2, 2013I made all my polygons with the same technique but somehow interactive polygon split tool does not split all polygons... I attached a file with which I have problem. Split tool just "disappears" after submitting changes...
View 1 Replies View RelatedMaya Modeling :: Can't Find Split Polygon Tool
Jul 19, 2012I'm following a tutorial in 2012 (Modelling a polygonal mesh) which states 'Select Edit Mesh > Split Polygon Tool'. There is no such tool listed in the Edit Mesh drop down and I can't find it anywhere.
View 2 Replies View RelatedMaya Modeling :: Fill Hole With Polygons Then Clean Up With Split Polygon Tool
Aug 20, 2012I am building some geometry and need to fill in this area, (ie fill hole with polygons then clean up with split polygon tool) but I am new to nurbs and am trying to do this model with nurbs. I usually use hull mode and move the hull down into the piece of geometry, but it won't move correctly that way.
So in the picture below i am trying to fill the red area and have it go into the green surface. The curvature of the green area makes it not line up correctly(ie fitting to the curvature of the green surface) when using the "moving hulls" approach. I was seeing if there was an easy way to go about this.
Maya Modeling :: Split Both Sides Of Polygon
Aug 23, 2011I added 2 split lines to this polygon using the split polygon tool but the other side didn't split. how can i split both sides together in order to make it equally?
View 1 Replies View RelatedMaya Modeling :: Split Polygon And Can't Merge Border?
Jul 13, 2012I have a model of gums and a set of teeth. What I am trying to do is create an animation where the fourth tooth back on each side of the upper gums disappear then create a blendshape causing the front teeth to move back and fill in the gaps as well as condense the gums so there isn't a gap here either. I am not exactly sure what the best way to do this would be, I am newer to Maya. My question is; Is there and easier way to do this because once I delete the faces and have a divides mesh I go to Mesh->Seperate and select Vertex mode on both and combine the meshes manually by selecting each vertex with the move tool and while holding "V" dragging the vertex over to the adjacent vertex on the opposite mesh. The issue im having is that the width of the mesh starts smaller upfront and progressivly gets bigger as you move to the back of the gums so by deleting a middle section the two meshes dont line up. The back mesh is much wider than the front. I am also worried that when i go to create a Blendshape to transition from the origional mesh to the new shortened one that will pull the teeth back to a perfect smile. I have heard that when creating a BS both meshes need to have the same number of Vertices and after removing a section mine wont. I am also concerned because after the two meshes have been sewn using this process I am left with an ugly point of intersection all the way around my mesh that has proven difficult to blend using the 'Sculpt Geometry Tool' with a falloff/Soft Mod.
View 3 Replies View RelatedMaya Modeling :: Why Does The Split Polygon Points Disappear
Jun 23, 2011Im supposed to connect them like they're displayed in the picture. I did both of them separately but i just did all four to show how i want them. Im supposed to connect those two but when i press enter when im done, it disappears. Then use the insert edge loop tool to make the neck line smaller.
Both Pictures are the same. The second one just has backface cullin under display
Maya :: Interactive Split Polygon Tool
Aug 19, 2012Sometimes when i want to add an edge between two others edges, the tool just does not create a new edge and I don't see any error popping. Some other time, it will create an edge but it's not going to place it where I wanted it to be. I would like to know how I could fix this problem and or what should i change in the option box.
View 3 Replies View RelatedMaya :: Can't Find Mesh And Edit Mesh Menu
Dec 4, 2011I thought they were supposed to appear when the Polygon shelf is selected? I don't see them. In fact, when I select different shelves the menu items on the right half of the task bar don't change at all. Is this normal?
This is Maya 2011 on Mac OS X Lion.
Maya Modeling :: How To Select Only One Polygon
Sep 8, 2011First of all I am new to Maya, only 4-5 hours of playing through the menu and I've stumbled upon a big issue for me. I can't select polygons after I've deselected them, I can only right click- select all but that's useless when I want to work on just 1 polygon. How to select a polygon?
With NURBS, the "Select Tool" works just fine, but with Poly, nothing happens.
Maya Modeling :: How To Select A UV On Polygon
Feb 13, 2011I select a UV on my polygon and it gives me two corresponding uvs in the texture editor, i`ve tried sew uvs and merge uvs in the texture editor but it doesn`t seem to work, is there something i should know?
View 2 Replies View RelatedMaya Modeling :: Unable To Select Face Of A Polygon
Aug 27, 2012I have attached a picture of what it continues to do when I attempt to select a face of this polygon I revolved from a cv curve tool line. Accidentally copied dual screen. I have been running into countless problems while trying to manipulate this revolved surface like a polygon but there is something stopping me. How do I just select an edge or a face without the entire thing lighting up with yellow dots and not actually selecting anything! I try to hold shift and click other faces but that doesn't work either!
If I could somehow delete the action of revolving a line to treat the independent tessellations as one uniform polygon. I am very new to this program and I don't know where history might be.
Maya Modeling :: Can't Select Polygon Objects Or Faces Properly
Dec 13, 2011i'm having a lot of troubles with a free rig i downloaded at creativecrash [URL]. I'll keep it short as i have quite a lot of things to explain: I animated my shot, and everything was ok. Now i have to shade/light/render my shot using vray, trying to create brand new vray materials; I started from my robot-character. Here comes the problems: - I can't select the polygon geometry(i asked the rigger, and he said the geometry were imported as references at rigging time). There are no geometry layers in reference or template, then there must be somthing else causing me the problem. I can access to the object via hypershade, i can click on the shape node and i can see the geometry selected, but then, when i try to access faces, i can't select them!in no way. This means i can't create selections for materials, and so i can't shade as i liked. I tried to selecte faces using the select by materials feature in the hypershade (as the character has some pre created basic materials)but again, i'm not free to assign materials where i want, and i just can use the pre-existing face selections and work on those, but it's not enough for me. [URL]
View 2 Replies View RelatedMaya Modeling :: Use Create Polygon Tool
Oct 12, 2011I'm trying to use the Create Polygon tool. My problem is that when I click to create a polygon I don't see anything. I can keep clicking and clicking to create points, which it apparently IS creating, but I don't see anything until I switch through one of the View types (wire frame, shaded, etc.).
I know I'm supposed to see the verts the second I click but that's not what I'm getting, it's more like I need to just go through the motions of blindly creating my shape, change views, and then edit the resulting verts and edges later.
Maya Modeling :: Edit Mesh To Create A New Extrusion
Oct 20, 2013I've just extruded a face. I realize I need make a slight adjustment. I don't want to undo the extrudtion nor do I want do an Edit Mesh to create a new extrusion.Is there an easy way to readjust an extrudtion?
View 1 Replies View RelatedMaya Modeling :: Edit Mesh And Cylindrical Mapping
Oct 20, 2012I'm using Maya 2013 and I can't find "Edit Mesh" at the top of the window. I've found this page (
[URL]......
but it refers to Maya 2012. The second problem is:
I'm trying to put an image on the cylinder-surface. I've found a youtube-video (added bellow) which says I have to click on "Cylindrical Mapping" after making a "blinn2" (and so on).
But when I click on "Cylindrical Mapping" nothing happens. There isn't even an error message.
Maya Modeling :: Interactive Split Tool
Jan 6, 2013I could not solve with this tool: Interactive Split Tool. I select edges that normally want to cut.
View 1 Replies View RelatedMaya :: Select Tool (q) Marking Menu
Apr 11, 2011How I can modify this to something closer to the 2011 version. More specifically - I used to use the "camera based selection" option all the time, and would love to have it back... It would be a bonus if modifying the marking menus for specific keys, was as easy for the ones surrounding the hotbox.
View 2 Replies View RelatedMaya :: How To Import CSV Data To Create 3D Polygon Mesh
May 20, 2012I need to import .csv data with surface parameters obtained from a microscope in Maya. I also want 3D polygon mesh to be created from that data.
View 5 Replies View RelatedAutoCad 3D :: Select Mesh Face To Split Failed
Jan 15, 2013Say I draw a mesh sphere and I do the Split Mesh Face. Why am I fail to select the mesh face to split? It only allows me to pick the lines.
View 1 Replies View RelatedMaya Modeling :: Cut Out A Piece Of A Polygon
Aug 21, 2012[URL]........
This is my model. Simple.
Now the only thing I want to do is to cut out this:
[URL]........
I used the Extrude tool just for visualization. The problem is, working with booleans apparently doesn't work for such objects, it works for freshly created clean polygons, but not for this one, when I try to use "Boolean difference" both objects disappear.
Extruding doesn't work because the faces are still there and I cannot delete them for whatever reason:
[URL].........
My cursor is pointing on the little face, but both are being highlighted. Making a hole through the the "Make a hole" function doesn't work because it only deletes faces as it seems.
Maya Modeling :: How To Rotate A Polygon Manually
Apr 13, 2013I need to rotate a polygon manually so that one of its vertices snaps to a vertex/edge/face of another polygon. How can that be done?
View 2 Replies View RelatedMaya Modeling :: Create Many Holes In Polygon?
Mar 22, 2012I am self taught and only using maya for about 3 months now but the situation where an object that needed many small holes has caused me some problems 3 times now.
In the current situation I am essentially modeling a CPU and a CPU socket. there is ~240 pins on the cpu and that will connect with the socket where there should be 240 holes to match.
The only method I know is boolean difference but that causes the entire polygon cube to disappear instead of creating a hole in it.
what is another method for creating many small holes? another example is a piece of formed metal that has small holes in it for air vent.
Maya Modeling :: Get Distorted UV Map When Polygon Is Smoother
Feb 24, 2012When I apply a Uv map into my model it fits very well. But when I apply Smooth, it gets very distorted. How can I resolve this.
View 9 Replies View RelatedMaya Modeling :: Can't Get Selection Handles On Polygon Faces
Aug 12, 2011in order to get a head start on my next class, I bought the book: Introducing Maya 2011 by Dariush Derakhshani and have been following along with the tutorial projects within.
The issue I am having is probably a silly noob thing, but I can't get the selection handles (for polygon faces) to show up on a simple polygon sphere. I can see the handles on the corners of individual faces, but not the ones that are supposedly in the center of each face.
I have tried going to Display > Transform Display > Selection Handles but nothing happens. I have tried this while selecting the sphere with options under both "Select by Object Type" and "Select by Component Type" with no results.
I am running Maya 2011 on a Macbook Pro on OSX.
Maya Modeling :: Input Tab Not Showing Up When Creating Polygon
Jan 19, 2014My Inputs tab dont show up when I create a polygon, so i can't edit subdivs? Happens when i try to add subdivs to a newly made polygon primitive.
View 1 Replies View RelatedMaya Modeling :: How To Turn Polygon Face With Selection Handle Visible
Oct 26, 2012How to turn polygon face with selection handle visible on (every small dot that appearing in the middle of each face). I'm a Maya starter.
View 2 Replies View RelatedMaya Modeling :: Make Live Snapping To Polygon Face Center?
Apr 29, 2011I'm using the Make Live feature on a low poly object to create new objects. For example, using the live object as a shell to create new polygon with the "create poly" tool. It seems to only want to snap to the center point of each face on the object.
View 1 Replies View RelatedMaya Modeling :: Deleting Extra Mesh?
May 24, 2011from what I understand, mesh cleanup fixes problems with bad geometry. but is there a function by which I can delete all edgeloops in a mesh that don't contribute to the shape? so Maya turns the mesh into as low rez as possible while retaining the shape....
View 2 Replies View RelatedMaya Modeling :: 2D Slices Of Mesh Model
Jul 8, 2013I bought a 3d mesh model of a chair I want to make out of wood. To do this I want to use Maya to create 2D slices of the mesh model that I can use as templates for my woodwork.
The model looks great in Maya, but how to create these slices or 2D views and print them.
Maya Modeling :: Editing More Than One Mesh At A Time?
Mar 11, 2011Is there any way for editing more then one meshes at a time? For example: I want to extrude, bevel, connect components of my two cubes at the same time.
View 2 Replies View Related