I select a UV on my polygon and it gives me two corresponding uvs in the texture editor, i`ve tried sew uvs and merge uvs in the texture editor but it doesn`t seem to work, is there something i should know?
View 2 RepliesFirst of all I am new to Maya, only 4-5 hours of playing through the menu and I've stumbled upon a big issue for me. I can't select polygons after I've deselected them, I can only right click- select all but that's useless when I want to work on just 1 polygon. How to select a polygon?
With NURBS, the "Select Tool" works just fine, but with Poly, nothing happens.
I have attached a picture of what it continues to do when I attempt to select a face of this polygon I revolved from a cv curve tool line. Accidentally copied dual screen. I have been running into countless problems while trying to manipulate this revolved surface like a polygon but there is something stopping me. How do I just select an edge or a face without the entire thing lighting up with yellow dots and not actually selecting anything! I try to hold shift and click other faces but that doesn't work either!
If I could somehow delete the action of revolving a line to treat the independent tessellations as one uniform polygon. I am very new to this program and I don't know where history might be.
i'm having a lot of troubles with a free rig i downloaded at creativecrash [URL]. I'll keep it short as i have quite a lot of things to explain: I animated my shot, and everything was ok. Now i have to shade/light/render my shot using vray, trying to create brand new vray materials; I started from my robot-character. Here comes the problems: - I can't select the polygon geometry(i asked the rigger, and he said the geometry were imported as references at rigging time). There are no geometry layers in reference or template, then there must be somthing else causing me the problem. I can access to the object via hypershade, i can click on the shape node and i can see the geometry selected, but then, when i try to access faces, i can't select them!in no way. This means i can't create selections for materials, and so i can't shade as i liked. I tried to selecte faces using the select by materials feature in the hypershade (as the character has some pre created basic materials)but again, i'm not free to assign materials where i want, and i just can use the pre-existing face selections and work on those, but it's not enough for me. [URL]
View 2 Replies View RelatedI am a newbie, and doing the helmet tutorial. It is asking me to go to the edit mesh menu and select the split polygon tool. It isn't there. where is it.
View 5 Replies View Related[URL]........
This is my model. Simple.
Now the only thing I want to do is to cut out this:
[URL]........
I used the Extrude tool just for visualization. The problem is, working with booleans apparently doesn't work for such objects, it works for freshly created clean polygons, but not for this one, when I try to use "Boolean difference" both objects disappear.
Extruding doesn't work because the faces are still there and I cannot delete them for whatever reason:
[URL].........
My cursor is pointing on the little face, but both are being highlighted. Making a hole through the the "Make a hole" function doesn't work because it only deletes faces as it seems.
I'm trying to use the Create Polygon tool. My problem is that when I click to create a polygon I don't see anything. I can keep clicking and clicking to create points, which it apparently IS creating, but I don't see anything until I switch through one of the View types (wire frame, shaded, etc.).
I know I'm supposed to see the verts the second I click but that's not what I'm getting, it's more like I need to just go through the motions of blindly creating my shape, change views, and then edit the resulting verts and edges later.
I need to rotate a polygon manually so that one of its vertices snaps to a vertex/edge/face of another polygon. How can that be done?
View 2 Replies View RelatedI added 2 split lines to this polygon using the split polygon tool but the other side didn't split. how can i split both sides together in order to make it equally?
View 1 Replies View RelatedI am self taught and only using maya for about 3 months now but the situation where an object that needed many small holes has caused me some problems 3 times now.
In the current situation I am essentially modeling a CPU and a CPU socket. there is ~240 pins on the cpu and that will connect with the socket where there should be 240 holes to match.
The only method I know is boolean difference but that causes the entire polygon cube to disappear instead of creating a hole in it.
what is another method for creating many small holes? another example is a piece of formed metal that has small holes in it for air vent.
When I apply a Uv map into my model it fits very well. But when I apply Smooth, it gets very distorted. How can I resolve this.
View 9 Replies View Relatedin order to get a head start on my next class, I bought the book: Introducing Maya 2011 by Dariush Derakhshani and have been following along with the tutorial projects within.
The issue I am having is probably a silly noob thing, but I can't get the selection handles (for polygon faces) to show up on a simple polygon sphere. I can see the handles on the corners of individual faces, but not the ones that are supposedly in the center of each face.
I have tried going to Display > Transform Display > Selection Handles but nothing happens. I have tried this while selecting the sphere with options under both "Select by Object Type" and "Select by Component Type" with no results.
I am running Maya 2011 on a Macbook Pro on OSX.
I have a model of gums and a set of teeth. What I am trying to do is create an animation where the fourth tooth back on each side of the upper gums disappear then create a blendshape causing the front teeth to move back and fill in the gaps as well as condense the gums so there isn't a gap here either. I am not exactly sure what the best way to do this would be, I am newer to Maya. My question is; Is there and easier way to do this because once I delete the faces and have a divides mesh I go to Mesh->Seperate and select Vertex mode on both and combine the meshes manually by selecting each vertex with the move tool and while holding "V" dragging the vertex over to the adjacent vertex on the opposite mesh. The issue im having is that the width of the mesh starts smaller upfront and progressivly gets bigger as you move to the back of the gums so by deleting a middle section the two meshes dont line up. The back mesh is much wider than the front. I am also worried that when i go to create a Blendshape to transition from the origional mesh to the new shortened one that will pull the teeth back to a perfect smile. I have heard that when creating a BS both meshes need to have the same number of Vertices and after removing a section mine wont. I am also concerned because after the two meshes have been sewn using this process I am left with an ugly point of intersection all the way around my mesh that has proven difficult to blend using the 'Sculpt Geometry Tool' with a falloff/Soft Mod.
View 3 Replies View RelatedMy Inputs tab dont show up when I create a polygon, so i can't edit subdivs? Happens when i try to add subdivs to a newly made polygon primitive.
View 1 Replies View RelatedIm supposed to connect them like they're displayed in the picture. I did both of them separately but i just did all four to show how i want them. Im supposed to connect those two but when i press enter when im done, it disappears. Then use the insert edge loop tool to make the neck line smaller.
Both Pictures are the same. The second one just has backface cullin under display
I'm following a tutorial in 2012 (Modelling a polygonal mesh) which states 'Select Edit Mesh > Split Polygon Tool'. There is no such tool listed in the Edit Mesh drop down and I can't find it anywhere.
View 2 Replies View RelatedHow to turn polygon face with selection handle visible on (every small dot that appearing in the middle of each face). I'm a Maya starter.
View 2 Replies View RelatedI'm using the Make Live feature on a low poly object to create new objects. For example, using the live object as a shell to create new polygon with the "create poly" tool. It seems to only want to snap to the center point of each face on the object.
View 1 Replies View RelatedI am building some geometry and need to fill in this area, (ie fill hole with polygons then clean up with split polygon tool) but I am new to nurbs and am trying to do this model with nurbs. I usually use hull mode and move the hull down into the piece of geometry, but it won't move correctly that way.
So in the picture below i am trying to fill the red area and have it go into the green surface. The curvature of the green area makes it not line up correctly(ie fitting to the curvature of the green surface) when using the "moving hulls" approach. I was seeing if there was an easy way to go about this.
I made all my polygons with the same technique but somehow interactive polygon split tool does not split all polygons... I attached a file with which I have problem. Split tool just "disappears" after submitting changes...
View 1 Replies View Relatedi have been having problems with maya where i can't select individual faces vertices or anythign other than the entire model
View 8 Replies View RelatedHere is what I've tried so far in creating the pupil of the eyeball:
1. Right click - select isoparm - attempt to select.
2. Right click - select Surface Point - attempt to select.
3. Left clicking
4. Holding shift (and other keys) - attempt to select
5. Right clicking
6. Middle clicking
7. Marqueeing
When I right click - select surface point, I get something that looks like a selection, but it also has an isoparm dotted line.... when I attempt to DETACH I get an error.
i can´t let just one vertex, i must always let 3 vertex at last, otherwise it won´t delete, i have even problems when extruding, when I select 1 vertex, instead of extruding just 1, it will create 2 or 3 vertex, probably to make a face.
View 4 Replies View RelatedI am currently following the getting started guide for Maya 2011 and I have come to a portion where it is required to use the Extrude tool to extend a part of the helmet.(page 100 : Polygonal Modeling / Lesson 1 / Extruding polygon components)
Everything is fine up to this instruction 5 Click the large circle that surrounds the manipulator to display the rotate manipulators and then drag the green circular manipulator to rotate the angle of the extrusion to match the angle in the reference sketch (see image) and then drag the arrow manipulator a second time to extrude a second section of mesh.
The actual problem: On my scene, when I click the circle that surrounds the manipulator, the 3 axis' rotate handles appear,but they disappear as soon as I release the mouse button (It is the same behavior if I move and if I do *not* move the mouse before releasing).
What I'd like to know is whether Maya can do accuracy.
For instance: Is it possible for me to select two edges or vertices and type in an exact distance that I would like to have between them.
Very fine accuracy is not required.
My Windows 7 system is using the latest graphics drivers for Intel 965 Express Chipset.
** When i select an object Maya tends to ignore the foreground object you'd intuitively think it should select and instead selects the bottom-most / farthest back object (eg. instead of selecting the foreground sphere it selects the flat plane the sphere sits on top of).
I've updated my graphics driver to the latest available and yet still the nuisance occurs. I am able to select any desired object however i must rotate the view so that the object has no other items behind it (eg. the viewport is tilted towards the empty sky).
Is this some useless setting in Maya that happened to activate? I've already used Preferences to reset to defaults but no good.
i am modeling a cello.... the forward edge of the body frame is a single face. in order to bevel it, i have to select all the edges... there are lots. for reasons that surpass understanding, MAYA does not recognize the edges of a 'corner' to be an edge loop. nor will it retain the selection with a selection mode change as some apps will (ie: select face, change to 'edge select' and have all the edges selected).
is there some simple way to select ALL the edges of a face?
I am working in meters.
I can not seem to select vertices that are "farther" from the camera.
If I scale the object down - I can start selecting multiple verts again.
If I create a polysphere and make a part of the sphere invisible via isolate select, the hidden faces are still selected if I try to select faces. They are activated as if they were visible. And the invisible faces are selected if I to a click for face selection.
Windows XP, Win 7, Maya2014 SAP SP1.
I'm having a problem with being able to select inputs in the Chanel box / layer editor ! I am using maya 2012 on a MacBook pro , for instance if I create a cylinder ,when it's created I bring up the Chanel box , I have : pCylinder1 then the boxes for adjusting the xyz axis etc , then shapes / pCylinderShape1 , and that's it ! I have no inputs tab to adjust sub-divisions etc ?? Have I not got something selected
View 1 Replies View RelatedI'm new to Maya, so this is likely something I'm just missing or that I've done without realizing it, however...
I've created a scene with a few polygonal objects. As an example, imagine a house with plants around it and a cloud above. The plants are spaced evenly along a curve, and the cloud is also made using a Paint Effect with a Modifier around it to control it's shape using slight forces, etc.
However, when it's done and I select the entire group of objects to drag to a different position, weird things happen. The plants seem to move much more quickly in that direction, so that soon they're no longer positioned where they should be at the base of the house, and the clouds move in the opposite direction from where I'm dragging (i.e. down not up). What I'll call the 'normal' polygonal objects (e.g. the house, car, etc.) all move fine, but I cannot figure out how to fix the other items so everything maintains its relative position, or lock the whole scene together to move as a group.
I've tried to combine them, and even 'parent' everything to the house, but I suspect I've changed something like a control handle position or rotated something that now moves opposite the normal xyz directions.