I am currently following the getting started guide for Maya 2011 and I have come to a portion where it is required to use the Extrude tool to extend a part of the helmet.(page 100 : Polygonal Modeling / Lesson 1 / Extruding polygon components)
Everything is fine up to this instruction 5 Click the large circle that surrounds the manipulator to display the rotate manipulators and then drag the green circular manipulator to rotate the angle of the extrusion to match the angle in the reference sketch (see image) and then drag the arrow manipulator a second time to extrude a second section of mesh.
The actual problem: On my scene, when I click the circle that surrounds the manipulator, the 3 axis' rotate handles appear,but they disappear as soon as I release the mouse button (It is the same behavior if I move and if I do *not* move the mouse before releasing).
I'm trying to find a way to have an object's rotation axis match it's parent's. In Softimage, this can be done with Freeze Rotation Transform (or some similarly named command), and it will reorient the pivot axis to the parent's. Trying to find Maya equivalent.
It's not important that it match it's parents transform. If there is a way to have an object match any other object's rotation axis, yet maintain vertex positions in world space, that's just as good.
Is it possible to change the display size of the local rotation axis?
I'm trying to visually align the local rotation axis for joints with geometry that isn't always world axis aligned. I've searched on different forums as well as searches on "topeka" (google ), and I've come up with nothing so far.
When setting up a simple FK control curve on say the wrist for example, many times the control curve isn't exactly perpendicular to the local rotation axis of the joint movement, so when we position the control curve to be perpendicular to the joint - it has a rotational value added, but the rotational handles are lines up with the rotational handles of the joint that we want to move.
Freeze Transformations: then the control curves rotational handle go back to being skewed (out of alignment with the joints)
We want to Freeze transformations before constraining the curve, but we'd really to keep those rotations control handles to remain aligned with the joints rotational handles. This will make it an exact control when animating - grab the rotational handle of the curve, rotate it, and the joint will move exactly in the proper direction.
how to get the rotational handle of any control curve to run perpendicular to the shape after freezing transformations?
For some reason some of the joints in my character rig are displaying their local rotation axis and I am unable to turn them off. The usual Display>Transform Display>Local Rotation Axis doesn't do it. This doesn't apply to all joints, just some. This is very frustrating as it causes real clutter when rigging.
I've been using maya since 8.5 and there's a notorius bug that will probably be never addressed by maya developers. I just upgraded to 2012 and am getting this again: // Warning: Could not find an appropriate startup camera: side. A substitute will be used.
And i took all the preventive actions: window size and position are not saved with file, i always go back to four view before saving, etc. Still no joy.
In fact the side camera is not missing, it's right there and fully functional. What happens as a consequence of this error is that one of the rotation axes in perspective view are locked, i can't rotate my scene around the Y axis.
It doesn't work either if i export my object and import it back into a fresh scene. Axis remains locked. I'm losing my scenes that i've put insane amount of work into. No hope to restore them.
I am busy working on rigging a character ( See attachment) to the best of my abilities and am running into some issues:
I have made a nurbs curve object which I intend to use as a controller in my rig, I have however modeled my character with his arms in a 45 degree angle so I snapped this particular object to the wrist and aligned it with the geometry...here comes the fun part , because it is a controller I wanted to have a clean channelbox zo I froze transformations which neatly sets every channel to 0, it also snaps the local axis to a world pivot orientation....
I went in componentmode pressed the question mark thingy and thought it was working..but it still alters the values in the channelbox.
I basically want the same rotation axes editing capabilities as I have with joints, I will try fiddling with that next, but I can't believe that this can't be solved any simpler.
So perhaps I'm missing something blindingly obvious, but in previous versions of Maya, I've been able to simply hit F8 and check the '?' icon to be able to go in and individually rotate Local Rotation Axis to be the way I want.
For some reason I cannot find how to do this now in 2011? I've only been able to do them using the auto-tool.
Looking for the steps I need to take to be able to manipulate the local rotation axis individually as I have in the past now?
I just downloaded Maya 2012. The rotation tool only rotates an object on the y axis. For some reason, when I grab the X or Z axis, it will still only rotate on the Y axis. How do I fix this?
I was watching a tutorial on digital tutors and they Revolved a CV Curve to make a tire, and I want to know how to extend a curve along an axis instead of revolve it.I painted in the Right viewer to show what I want to achieve.
I am puzzled about how to zero out rotation my object's pivot point when I rotate said pivot point using the "insert" key (on a pc). Furthermore, any subsequent object I make after that has its pivot point off just like the first object when I rotate its pivot point. In fact, even when I start a whole new scene, the pivot point rotation of any object is off just like the first time I rotated the first object's pivot point in a previous scene.
In the "move" tool options, you can set the move manipulator to snap to a plane or to three points; is there an equivalent for rotations? Ultimately I'd like to select three points to establish a construction plane, then have an orthographic camera based on those three points. This way you can make a complex rotation based on some real coordinates. I think the old "Design Studio" used to have this function - you can take a polygon face, snap the plane right to it, and all your movements and rotations are exactly relative to that face.
Take a sphere, transform it in both location and rotation. Now you want to make it's new transform and rotation zeroed out so so that it still rotates around it's local axis but all its base values are zero. If you just freeze transforms, it puts everything to zero around the world axis not the local axis. This is not what I want. I want to be zeroed around the local axis.
My rotate tool in maya seems to be "locked" i can't freely rotate whenever i left click hold the center and it only rotates where my viewport is looking at so if im at the X axis I can't rotate the Z axis. Tried setting my preferences to default and nothing. I've also set my rotate tool to default.
Whenever I move my camera say to the Z axis the Z handle gets selected and same when I move the camera to the X axis.
Is there any way I can extract the rotation of a block relative to the yz axis and xy axis. I can extract the insertion point and xy rotation but not the yz and xz.
Here is what I've tried so far in creating the pupil of the eyeball:
1. Right click - select isoparm - attempt to select. 2. Right click - select Surface Point - attempt to select. 3. Left clicking 4. Holding shift (and other keys) - attempt to select 5. Right clicking 6. Middle clicking 7. Marqueeing
When I right click - select surface point, I get something that looks like a selection, but it also has an isoparm dotted line.... when I attempt to DETACH I get an error.
i can´t let just one vertex, i must always let 3 vertex at last, otherwise it won´t delete, i have even problems when extruding, when I select 1 vertex, instead of extruding just 1, it will create 2 or 3 vertex, probably to make a face.
First of all I am new to Maya, only 4-5 hours of playing through the menu and I've stumbled upon a big issue for me. I can't select polygons after I've deselected them, I can only right click- select all but that's useless when I want to work on just 1 polygon. How to select a polygon?
With NURBS, the "Select Tool" works just fine, but with Poly, nothing happens.
I select a UV on my polygon and it gives me two corresponding uvs in the texture editor, i`ve tried sew uvs and merge uvs in the texture editor but it doesn`t seem to work, is there something i should know?
My Windows 7 system is using the latest graphics drivers for Intel 965 Express Chipset.
** When i select an object Maya tends to ignore the foreground object you'd intuitively think it should select and instead selects the bottom-most / farthest back object (eg. instead of selecting the foreground sphere it selects the flat plane the sphere sits on top of).
I've updated my graphics driver to the latest available and yet still the nuisance occurs. I am able to select any desired object however i must rotate the view so that the object has no other items behind it (eg. the viewport is tilted towards the empty sky).
Is this some useless setting in Maya that happened to activate? I've already used Preferences to reset to defaults but no good.
i am modeling a cello.... the forward edge of the body frame is a single face. in order to bevel it, i have to select all the edges... there are lots. for reasons that surpass understanding, MAYA does not recognize the edges of a 'corner' to be an edge loop. nor will it retain the selection with a selection mode change as some apps will (ie: select face, change to 'edge select' and have all the edges selected).
is there some simple way to select ALL the edges of a face?
I have attached a picture of what it continues to do when I attempt to select a face of this polygon I revolved from a cv curve tool line. Accidentally copied dual screen. I have been running into countless problems while trying to manipulate this revolved surface like a polygon but there is something stopping me. How do I just select an edge or a face without the entire thing lighting up with yellow dots and not actually selecting anything! I try to hold shift and click other faces but that doesn't work either!
If I could somehow delete the action of revolving a line to treat the independent tessellations as one uniform polygon. I am very new to this program and I don't know where history might be.
i'm having a lot of troubles with a free rig i downloaded at creativecrash [URL]. I'll keep it short as i have quite a lot of things to explain: I animated my shot, and everything was ok. Now i have to shade/light/render my shot using vray, trying to create brand new vray materials; I started from my robot-character. Here comes the problems: - I can't select the polygon geometry(i asked the rigger, and he said the geometry were imported as references at rigging time). There are no geometry layers in reference or template, then there must be somthing else causing me the problem. I can access to the object via hypershade, i can click on the shape node and i can see the geometry selected, but then, when i try to access faces, i can't select them!in no way. This means i can't create selections for materials, and so i can't shade as i liked. I tried to selecte faces using the select by materials feature in the hypershade (as the character has some pre created basic materials)but again, i'm not free to assign materials where i want, and i just can use the pre-existing face selections and work on those, but it's not enough for me. [URL]
If I create a polysphere and make a part of the sphere invisible via isolate select, the hidden faces are still selected if I try to select faces. They are activated as if they were visible. And the invisible faces are selected if I to a click for face selection.
I'm having a problem with being able to select inputs in the Chanel box / layer editor ! I am using maya 2012 on a MacBook pro , for instance if I create a cylinder ,when it's created I bring up the Chanel box , I have : pCylinder1 then the boxes for adjusting the xyz axis etc , then shapes / pCylinderShape1 , and that's it ! I have no inputs tab to adjust sub-divisions etc ?? Have I not got something selected
