Maya Modeling :: How To Zero Out Pivot Point Rotation

Jul 29, 2012

I am puzzled about how to zero out rotation my object's pivot point when I rotate said pivot point using the "insert" key (on a pc). Furthermore, any subsequent object I make after that has its pivot point off just like the first object when I rotate its pivot point. In fact, even when I start a whole new scene, the pivot point rotation of any object is off just like the first time I rotated the first object's pivot point in a previous scene.

View 2 Replies


ADVERTISEMENT

Maya Modeling :: How To Move Pivot Point On Mac

Aug 20, 2013

We are just trying out Maya on the OSX Platform.
 
In the tutorial that we are going through, we are asked to select 2 curves, center the pivot point, and then hit the 'Insert' key to allow us to move the pivot point, and then holding down the 'C' key we should be able to move the pivot point along the curve.
 
Looking around we found that if you hit the 'fn + left arrow' keys you are meant to get the same as using the 'insert' key on the PC, but this is not right, and also when you try to hold down the 'C' key it does not allow the pivot point to be constrained to the curve.
 
So where is the 'Insert' key on the Mac?

View 1 Replies View Related

Maya Modeling :: How To Move Pivot Point

Jun 26, 2013

How I can move pivot that camera rotate around?

View 6 Replies View Related

Maya Modeling :: How To Disable Component Use Object Pivot

Mar 11, 2009

I've been using Maya for over a year and I've starting seeing some weird error. In edit mode, I select a couple of verts. I can transform, rotate, and scale the verts relative to the selection's center. However, recently whenever I want to scale my selected verts the scaling origin goes to the center of the object instead of the selection. This becomes somewhat irritating since it doesn't give the expected results. I've included a few pictures demonstrating my problem.

View 6 Replies View Related

Maya Modeling :: 2013 Pivot Handle Size?

Sep 3, 2013

i was trying to model a character in Maya and somehow messed up the pivot. The handle stretch beyond the horizon in the scale and move tool, and for the rotate one i can't see the circle no matter how far i zoom out.

View 1 Replies View Related

Maya Modeling :: How To Reset Pivot Tool Completely

Nov 26, 2012

I played around with the pivot, and I came to this rotate option, I roated abit only to realise I CANT undo this action.

How can I reset my pivot tool completely? because I can't undo anything, and it will always be not accurate now. always.

View 6 Replies View Related

Maya Modeling :: Align Pivot To Object Normal?

Sep 16, 2013

i am searching a script to align the pivot of a multiples objects (objets are 1 triangle polygon) to their normal. After that a way to offset on multiple objects pivot, a predefined value in the Y axis in local.

View 2 Replies View Related

Maya Modeling :: How To Fix Rotation Tool

Oct 9, 2012

I just downloaded Maya 2012. The rotation tool only rotates an object on the y axis. For some reason, when I grab the X or Z axis, it will still only rotate on the Y axis. How do I fix this?

View 2 Replies View Related

Maya Modeling :: Rotation Axis To Parent

Feb 28, 2013

I'm trying to find a way to have an object's rotation axis match it's parent's. In Softimage, this can be done with Freeze Rotation Transform (or some similarly named command), and it will reorient the pivot axis to the parent's. Trying to find Maya equivalent.

It's not important that it match it's parents transform. If there is a way to have an object match any other object's rotation axis, yet maintain vertex positions in world space, that's just as good.

View 1 Replies View Related

Maya Modeling :: Cannot Select Axis Rotation

Aug 30, 2011

I am currently following the getting started guide for Maya 2011 and I have come to a portion where it is required to use the Extrude tool to extend a part of the helmet.(page 100 : Polygonal Modeling / Lesson 1 / Extruding polygon components)

Everything is fine up to this instruction 5 Click the large circle that surrounds the manipulator to display the rotate manipulators and then drag the green circular manipulator to rotate the angle of the extrusion to match the angle in the reference sketch (see image) and then drag the arrow manipulator a second time to extrude a second section of mesh.

The actual problem: On my scene, when I click the circle that surrounds the manipulator, the 3 axis' rotate handles appear,but they disappear as soon as I release the mouse button (It is the same behavior if I move and if I do *not* move the mouse before releasing).

View 1 Replies View Related

Maya Modeling :: Construction Plane For Rotation?

Sep 29, 2013

In the "move" tool options, you can set the move manipulator to snap to a plane or to three points; is there an equivalent for rotations? Ultimately I'd like to select three points to establish a construction plane, then have an orthographic camera based on those three points. This way you can make a complex rotation based on some real coordinates. I think the old "Design Studio" used to have this function - you can take a polygon face, snap the plane right to it, and all your movements and rotations are exactly relative to that face.

View 2 Replies View Related

Maya Modeling :: Change Display Size Of Local Rotation Axis

Apr 1, 2010

Is it possible to change the display size of the local rotation axis?

I'm trying to visually align the local rotation axis for joints with geometry that isn't always world axis aligned. I've searched on different forums as well as searches on "topeka" (google ), and I've come up with nothing so far.

View 5 Replies View Related

Maya Modeling :: How To Find Center Point

Mar 29, 2013

How to find the center point in auto desk Maya...I know use the center point but i can't find the point..how to find the exact coordinate of the 3d object created using auto desk Maya? [URL]...

View 6 Replies View Related

Maya Modeling :: How To Create 5-point Star

Sep 7, 2011

I m trying to find some intelligent way to drawing a 5 point star in Maya, but don't using complex commands togheter and using some thing like a primitive comand ( maybe distorting some curve , etc ).

View 3 Replies View Related

Maya Modeling :: Creating Reference Point Or Locator For Group?

Jul 26, 2012

I was wondering if there is a way to create a group of vertices, edges or faces and somehow create a reference point or attach them to some kind of locator so they can be referenced at a later point. I want to be able to select a group of edges, model them and then move on to another task within Maya and have some kind of reference point so I can go back to the original group and not have to select them individually every time I want to work on that group of edges, faces or vertices, is this possible? I will post a picture shortly to this post so you can see an example of a specific group of edges that I would like to set a reference point or locater for.

View 2 Replies View Related

Maya Modeling :: 2014 Vertex / Point Snapping Not Working?

Oct 14, 2013

I'm having a problem with Maya's vertex/point snapping function. This is a simple thing to do normally but in the 2014 student version (which is full functionality other than having a prompt saying it is a student version upon saving the file), it isn't working.

Basically the process is making a selection of vertices and with the transform tool active, MMB dragging the manipulator to snap the selection to a destination vertex. The pivot point/manipulator of the selection is moving and snapping to the destination vertex on it's own when I hold 'V' and MMB drag, rather than the whole selection moving with the transform manipulator and snapping to the destination vertex. This problem is also happening with the modelling toolkit which is really annoying. I have checked that i'm not in edit pivot mode etc.

The point snapping is working however for objects, but not in component mode as above.

I am running Windows 7, Maya SP2.

View 1 Replies View Related

Maya Animation :: Control Curves Rotation Axis Coinciding With Joint Rotation?

Jul 15, 2011

When setting up a simple FK control curve on say the wrist for example, many times the control curve isn't exactly perpendicular to the local rotation axis of the joint movement, so when we position the control curve to be perpendicular to the joint - it has a rotational value added, but the rotational handles are lines up with the rotational handles of the joint that we want to move.

Freeze Transformations: then the control curves rotational handle go back to being skewed (out of alignment with the joints)

We want to Freeze transformations before constraining the curve, but we'd really to keep those rotations control handles to remain aligned with the joints rotational handles. This will make it an exact control when animating - grab the rotational handle of the curve, rotate it, and the joint will move exactly in the proper direction.

how to get the rotational handle of any control curve to run perpendicular to the shape after freezing transformations?

View 3 Replies View Related

3ds Max Modeling :: Move Pivot On Bottom

Dec 29, 2013

Is there an easy way to move the pivot on most bottom, most top, most left, most right center bottom, center top, center left, center right of the object ?

View 1 Replies View Related

Maya Animation :: Control Pivot Axis?

Aug 14, 2011

i am a 3ds max user but had to switch to maya for this project. I am trying to make the ctrl pivot axis to follow the bone axis but I dont know how to do it in Maya.

View 1 Replies View Related

Maya :: Modify Pivot Crashing 2012?

May 3, 2012

The video pretty much explains it. Randomly when I move the pivot (d) and snap to point (v) it crashes on mouse release. This has been happening recently more than is acceptable.

I included about 30 seconds up to the issue to show what exactly I was doing before the crash.

View 2 Replies View Related

3ds Max :: How To Set Pivot Point Of Eyes To Be At The Center Of Their Meshes

Feb 14, 2012

I have a character model I got from the Evolver site before it went offline.

I need to set the pivot point of the eyes to be at the center of their meshes so I can use it in Face Robot.

I do this by clicking on the eye object and "Affect Pivot Only", "Center to Object". This works but when I export the model as FBX the moment the export has finished my eyes have both jumped to the the floor and my pivot is still in the correct place. When I import the FBX into Softimage I see the eyes are now on the floor. I also have the same when I try to do the pivot point in Softimage [URL]....I am a competent modeller however a begginer when it comes to Autodesk's software. Is their some property on the model that could make it peform liek this, does it have something to do with the bones/skining?

i have spent the last 2 days trying to move an eye balls origin

View 2 Replies View Related

3ds Max :: Audio Float React Point By Some Pivot?

Nov 22, 2012

have a question regarding audio float on an object:

some objects react from a certain point with sound by just using a simple box in height for an example...it grows in the height from bottom start point...but if i use the width the movement is going into 2 directions instead of 1 ...i tried to move the pivot but it has no effect....is there a way to tell the reaction he has an another start point ?

View 2 Replies View Related

AutoCAD Civil 3D :: Object Viewer Pivot Point

Oct 5, 2012

I have some objects (corridor / intersection corridor / surface / grading ...)  in civil 3d 2013...When we rotate the 3d objects , object rotate pivot point  about (0,0,0,   or any place x,y,(z=0)..So rotated 3d object (if the Z= High value)  can't be seen / can be seen as a point.

how to change the object viewer pivot point ? (not using steering wheel or zoom extents  because of first time rotating objects seen so far )

View 3 Replies View Related

Revit :: Rotating - Making The Pivot Point Not Movable?

Aug 2, 2013

im having trouble with a rotational object. I Basically made a basketball system in the category of specialty equipment. i made several different families in the same category and have nested one big family in specialty equipment.. I then loaded the nested family into a Generic face base template and change the caegory to specialty  equipment, after completeing the steps i then loaded it into another family that is just specialty equipment. My problem is that, im either getting constraint problems when i set up my angular dimension parameter and try changing it's angle or when i do get it to change angles the pivot point keeps moving around...The main point is how do i get my pivot point to stay still and have my angle parameter change without errors?

View 1 Replies View Related

AutoCad 3D :: Set Pivot Point To Center Of 3D Object In 2014?

Jun 5, 2013

How to set a pivot point to the CENTER of a 3D object in AutoCAD 2014?

View 3 Replies View Related

Photoshop :: How To Save Pivot Point With Free Transform Tool

Apr 26, 2012

I'm animating a picture, have the limbs on different layers, so I can just simply use the free transform tool to rotate them into the good position.

Although it's a pain to always reset the pivot point from the center. Is there a way to make Photoshop remember where I want the pivot point to be?

View 2 Replies View Related

Maya Modeling :: Character Modeling From Animation Academy

Oct 14, 2011

I have a problem when I am modeling my character or rather the character from the animation academy. I have created an NURBS sphere and I want to adjust it to the arm, so I go to the component mode add some isosparms and then it happens!!! I can´t move any vertexes... but in the object mode I can move the hole object.

View 1 Replies View Related

AutoDesk Smoke :: Lock Pivot Point Of A Light To Light Itself?

Oct 26, 2012

How do you lock the pivot point of a light to the light itself? I thought just adding a Axis node would move the light and pivot point but the pivot does not move. Is there a way of parenting them together?

View 2 Replies View Related

Maya Animation :: Finger SDK Rotation

Sep 30, 2011

I set up SDKs on my character's fingers. Everything was working fine. Fingers rotated properly from the open hand "0" position to a closed fist at the "10" position. I have the hand set up as the Driver and the fingers as the driven.

I then wanted my IK arm to work in FK, so I went into my attribute editor for IK pole vector constraint and checked on "IK/FK Control". I did a few rotations of the elbow joint and everything seemed fine.

I then went back to do some work on my hand, and when I when to change the values in my channel box to get the hand to clench, the fingers did not rotate into a fist, but rather went in all directions.

I can get the hand to work correctly intermittently (when I go back to the bind pose), so I know the correct rotation information is there. I have tried deleting history and making sure translations are not set on the hand. Would this be a gimbal or a local vs. global orientation problem?

Also, a side question: I noticed that when I built the SDKs for the fingers, I had numerous "blendWeights" created. Are these weights involved with moving the fingers between the minimum and the maximum values you set in the SDK set-up process?

View 1 Replies View Related

3ds Max Modeling :: Get A Cube To Rotate Around Rotation System Of A Sphere?

Mar 9, 2012

I'm using 3DS Max 2012 and am trying to get a cube to rotate around the rotation system of a sphere sitting near by so that the cube looks like it's orbiting the sphere. The problem is that when I go to the coordinates menu and click on Pick, I select the sphere, but the rotation gizmo is still around the cube.

Here's a screenshot to show you what I mean.

See how the sphere is where the coordinates are suppose to be, but they are still around the cube?

How do I make this get around the sphere?

View 3 Replies View Related

3ds Max Modeling :: Civil View Vehicle Axle Rotation?

Aug 22, 2013

version 2014 It looks like the axle of vehicles is provided for wheel rotation only.I could be wrong, but it looks like plan rotation (z axis) is not provided.Or can it be applied manually at path curves?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved