I m trying to find some intelligent way to drawing a 5 point star in Maya, but don't using complex commands togheter and using some thing like a primitive comand ( maybe distorting some curve , etc ).
View 3 RepliesI have got a problem by modeling a roof. The first picture attached shows it right at the moment. I want to keep the star one can see in the center of the picture but the edges look at bit problematic because it consist of 3 former independent cubes. The edges are shown in the second picture.
My question is if it is possible to make the star consist of squares to model it a bit easier. I use maya 2012 education.
We are just trying out Maya on the OSX Platform.
In the tutorial that we are going through, we are asked to select 2 curves, center the pivot point, and then hit the 'Insert' key to allow us to move the pivot point, and then holding down the 'C' key we should be able to move the pivot point along the curve.
Looking around we found that if you hit the 'fn + left arrow' keys you are meant to get the same as using the 'insert' key on the PC, but this is not right, and also when you try to hold down the 'C' key it does not allow the pivot point to be constrained to the curve.
So where is the 'Insert' key on the Mac?
I am puzzled about how to zero out rotation my object's pivot point when I rotate said pivot point using the "insert" key (on a pc). Furthermore, any subsequent object I make after that has its pivot point off just like the first object when I rotate its pivot point. In fact, even when I start a whole new scene, the pivot point rotation of any object is off just like the first time I rotated the first object's pivot point in a previous scene.
View 2 Replies View RelatedHow to find the center point in auto desk Maya...I know use the center point but i can't find the point..how to find the exact coordinate of the 3d object created using auto desk Maya? [URL]...
View 6 Replies View RelatedHow I can move pivot that camera rotate around?
View 6 Replies View RelatedI was wondering if there is a way to create a group of vertices, edges or faces and somehow create a reference point or attach them to some kind of locator so they can be referenced at a later point. I want to be able to select a group of edges, model them and then move on to another task within Maya and have some kind of reference point so I can go back to the original group and not have to select them individually every time I want to work on that group of edges, faces or vertices, is this possible? I will post a picture shortly to this post so you can see an example of a specific group of edges that I would like to set a reference point or locater for.
View 2 Replies View RelatedI'm having a problem with Maya's vertex/point snapping function. This is a simple thing to do normally but in the 2014 student version (which is full functionality other than having a prompt saying it is a student version upon saving the file), it isn't working.
Basically the process is making a selection of vertices and with the transform tool active, MMB dragging the manipulator to snap the selection to a destination vertex. The pivot point/manipulator of the selection is moving and snapping to the destination vertex on it's own when I hold 'V' and MMB drag, rather than the whole selection moving with the transform manipulator and snapping to the destination vertex. This problem is also happening with the modelling toolkit which is really annoying. I have checked that i'm not in edit pivot mode etc.
The point snapping is working however for objects, but not in component mode as above.
I am running Windows 7, Maya SP2.
How to craete feathers in maya 2012? Or any good plugin for it for win. 7 x32 bit Maya 2012 ?
View 1 Replies View RelatedI'm trying to use the Create Polygon tool. My problem is that when I click to create a polygon I don't see anything. I can keep clicking and clicking to create points, which it apparently IS creating, but I don't see anything until I switch through one of the View types (wire frame, shaded, etc.).
I know I'm supposed to see the verts the second I click but that's not what I'm getting, it's more like I need to just go through the motions of blindly creating my shape, change views, and then edit the resulting verts and edges later.
How to construct buildings using maya or 3ds max which i have in a photograph?
View 4 Replies View RelatedI worked for some time with the free program blender to create my scenes and objects. Because I want to study the subject 'Technical Directing' I started learning how to work with Maya, the more "professional" software.
Although I read through the considered topic of the GettingStarted tutorial, I've still a question to you:
How can I create a face between already existing vertices? This would really improve my workflow.
I am self taught and only using maya for about 3 months now but the situation where an object that needed many small holes has caused me some problems 3 times now.
In the current situation I am essentially modeling a CPU and a CPU socket. there is ~240 pins on the cpu and that will connect with the socket where there should be 240 holes to match.
The only method I know is boolean difference but that causes the entire polygon cube to disappear instead of creating a hole in it.
what is another method for creating many small holes? another example is a piece of formed metal that has small holes in it for air vent.
I am trying to create a face for the empty space on the left but it doesn't seem to be working. Is there way for me to fill it?
View 2 Replies View Relatedhow i can create a rounded like tubular fonts in maya?kind of like the aspect you get when you apply the mia-roundcorners? but i would like to do it with meshes?
View 1 Replies View RelatedI've just extruded a face. I realize I need make a slight adjustment. I don't want to undo the extrudtion nor do I want do an Edit Mesh to create a new extrusion.Is there an easy way to readjust an extrudtion?
View 1 Replies View RelatedIs There a way to creat two spheres and to transform (rotate, move) one without affect the other? For example, I created two spheres in center of the scene, when I transformed (move, rotate) one other sphere was affected, deforming it. I now this is a basic doubt but I can't progress to next exercise.
View 2 Replies View RelatedI'm modelling a complex curve for a fashion garment. I've always modelled in polygons in the past but have had more success on this project using nurbs, however I've got to a certain position and I'm wondering which way is the best way to model / create the next section of the garment(see image attached). Is it just the case of creating lots of section lines as lofting?
View 2 Replies View RelatedI am trying to create a flat plane that is on a diagonal. In Max I remember you could zero out using the scale tool with local space orientation. How do I do this in Maya?
In the enclosed image see red arrow. The back/bottom edge of the tail is supposed to be flat. How do I get all vertices to be in one plane?
I am trying to create UVS on a bunch of spherical rocks. Is there a way to do this all at once without having all the rocks on the same projection? I have tried using MEL but can't quite figure it out.
View 4 Replies View RelatedI have used Quad Draw to create geometry on the surface of an object, this geometry and its pivot can be seen in picture 1.I then try to mirror this geometry to the other side of the object's surface using the settings shown in picture 2
I get a mirror, but not based on the pivot, but it seems the mirrored geometry wants to be attached to the original drawn polys as shown on picture 3. Could it be a bug or is this how Quad Drawn objects are intended to behave?
when i try to create a beveled tamil language font in maya 2013 sp2 ,it appears as question mark ,is there any way to ,even i changed my windowws 7 display language and key board language to tamil , i inserted the pic
View 1 Replies View Relatedhow to create cross sections without cutting up the model similar to applications like Autodesk Inventor? Maybe inserting a poly plane into the object and tell Maya to only render stuff in the normal direction of the plane if that is even possible?
[URL]
I created a very simple two poly object and then deleted my construction history and now I cannot seem to create a new polygon in the scene unless I turn off interactive creation.
If I choose create>sphere etc the little sign that says drag on grid appears but when I do nothing happens. I made a new scene and did the same thing and I don't have the same problem so Im not sure why in this particular scene.
i Have extruded Half the face of a cylinder. I just need to know how to turn the new extruded face into a perfect Hexagon.
View 4 Replies View RelatedI would like to make a star shape - but I need lots of verts and faces - I know how to make one with splines but when I extrude it there is not enough geometry in the face to do what I need to. Basically I'm wanting to create a rather beat up/bent in places sheet metal star.
View 5 Replies View RelatedI have a problem when I am modeling my character or rather the character from the animation academy. I have created an NURBS sphere and I want to adjust it to the arm, so I go to the component mode add some isosparms and then it happens!!! I can´t move any vertexes... but in the object mode I can move the hole object.
View 1 Replies View Relatedhow to create a star or like a sparkling effect on a wine glass ect..
View 1 Replies View RelatedYesterday one of my friend asked me how to create star with round edge as opposed to pointed edge. Quite fascinated by his challenge I started my beloved CorelDraw and drew a star with 40 spikes at a depth of 10. Since the stars have pointed edge, I used the Filler tool to round-off the sharp edges, I was successful, but the fillet tool also rounded off the lower (inside) node. hence I failed, to create what my friend had challenged.
One option is to create a star, then painfully select only the outer nodes and use the fillet tool to round off the edges. Is there any other easy method of doing the same in CorelDraw.
( My friend apparently uses the rival program Adobe Illustrator and mocks me using CDR )
In movies, photos, etc., a person will have a star burst on their teeth e.g. to show that their teeth are clean, that they are attractive, etc.
How do you create something like this? I have PSP X4.
How can I create a smart collection that automatically includes 4+ star photos created in the last month plus 5 star photos created within the last year? (i.e., only show best photos further back in time, but more recently, show a wider selection of photos)
Apparently, you can't include results of one SmartCollection in another SmartCollection (i.e., "Collection" criteria does not operate on SmartCollections).