Maya Modeling :: Possible To Make Star Consisting Of Squares To Model A Bit Easier
Mar 26, 2012
I have got a problem by modeling a roof. The first picture attached shows it right at the moment. I want to keep the star one can see in the center of the picture but the edges look at bit problematic because it consist of 3 former independent cubes. The edges are shown in the second picture.
My question is if it is possible to make the star consist of squares to model it a bit easier. I use maya 2012 education.
View 5 Replies
ADVERTISEMENT
Aug 15, 2013
I have downloaded a drawing of a Spitfire from WWII. I have made the curves with the curve tool. I cannot seam to convert them to anything else. I am trying to "skin" the aircraft so I can make the fuselage.
View 2 Replies
View Related
Sep 7, 2011
I m trying to find some intelligent way to drawing a 5 point star in Maya, but don't using complex commands togheter and using some thing like a primitive comand ( maybe distorting some curve , etc ).
View 3 Replies
View Related
Nov 9, 2011
I need to model a cloth in Maya 2012 as a part of a college assignment. I have attached a jpeg of my pre-production artwork, in it you can see the yellow cloth placed on two wooden planks. At the moment I am modelling the cloth by adjusting the vertices, but find it to be a bit tedious. Is there any other way for me get effective results. Since I am a beginner I would like to know the the different ways a little in detail.
View 3 Replies
View Related
Sep 25, 2011
I have a model which has already layouted uvs. I have to readjust small part of it in the modeling process. Soi deleated few faces and extruded new faces . When i want to automap the new part of the model nothing happens - in the uv texture editor there is simple square with 4 uvs although the faces of the new part is about 50 faces . How to map this part ?
View 2 Replies
View Related
Oct 10, 2012
i made a plane of 100m by 50m but it is not completely visible in pres view. I there any camera setting?
View 1 Replies
View Related
Jul 8, 2013
I bought a 3d mesh model of a chair I want to make out of wood. To do this I want to use Maya to create 2D slices of the mesh model that I can use as templates for my woodwork.
The model looks great in Maya, but how to create these slices or 2D views and print them.
View 2 Replies
View Related
Jul 8, 2011
I'm new to Maya. I'm looking for the option on how to deselect these pink vertex from my model. (photo)
View 2 Replies
View Related
Aug 6, 2013
I would like to edit the faces of a model I imported into Maya, but I cannot find the face option when I right click. When I create a polygon however, it works just fine on it. Is there any way I can convert the model into a polygon?
Fully sized image in attachment.
View 1 Replies
View Related
Jun 12, 2011
Have a model of a camera that was made out of polys, whats the best way to boolean / engrave text onto the model? i tried tons of things, deleting history before boolean diff, combining the objects then extracting. Result is that it either doesnt work or deletes both my text and my object. I always try to boolean things in my model because i lack experience with creating and applying displacement maps.
How to achieve this using boolean diff or can they suggest what to use as reference to learn how to create displacement maps.
View 9 Replies
View Related
Feb 25, 2013
I'm modelling a complex curve for a fashion garment. I've always modelled in polygons in the past but have had more success on this project using nurbs, however I've got to a certain position and I'm wondering which way is the best way to model / create the next section of the garment(see image attached). Is it just the case of creating lots of section lines as lofting?
View 2 Replies
View Related
Apr 17, 2013
I am trying to align my model to my image plane. I marquee select the vertices but only the one in the front selects I have checked Back face culling and soft selections and made sure that they are not on but it is still not working.
View 2 Replies
View Related
Nov 23, 2011
I am trying out Maya 2012 and when i select faces or vertices and try to move on individually, the whole model move. I don't need that, i just need to move the face or vertice alone not the whole image. Also is there any way to download tutorial and installing it into Maya 2012. where i am working with Maya 2012 don't have internet to browse right away.
View 5 Replies
View Related
Mar 28, 2012
New when it comes to any kind of environment modeling, but I'm trying to make a simple landscape with grass and trees for a project.
I've got a nice ground plane and a simple grass plane with a texture applied from Photoshop. I was wondering if there is a way to paint instances of my grass object without manually duplicating and placing each individual blade of grass?
View 1 Replies
View Related
Oct 20, 2011
how to create cross sections without cutting up the model similar to applications like Autodesk Inventor? Maybe inserting a poly plane into the object and tell Maya to only render stuff in the normal direction of the plane if that is even possible?
[URL]
View 4 Replies
View Related
Sep 9, 2013
I have problem with side view, my model appears incomplete. I add a file in word with the problem.
View 4 Replies
View Related
Nov 3, 2011
I am almost done with my model. He is in a naked state for the sake of making sure the anatomy is correct. I am preparing to rig, texture, and animate him. I plan on modeling the shirt and pants separate and use Maya's nCloth for those. I have also modeled glasses that are a completely separate mesh that will need to follow every movement of the head of my model.
Here is my issue, I am puzzled on how to model my shoes and socks.
1) Should i model them as part of the legs to eliminate further animation?
2) Should I model thee shoes and socks separate from the legs?
way to form a hierarchy where i can model everything individually and then make the main body rig a parent to everything secondary (shoes, socks, glasses, etc...)?
View 3 Replies
View Related
Feb 17, 2012
Maya 12 Hotfix 2, MacOS 10.6.8
When I am selecting objects, even in object mode I am getting this onslaught of bright yellow vertices, as though I had vertices selected in preferences or hotkeys... but I don't. All that stuff is off in my preferences. I can't seem to make it go away. Can't see faces for all the vertices cluttering up the view. Happening in all the panels.
View 1 Replies
View Related
May 9, 2012
I am currently trying to make a symmetrical texture map for my character.
For example, I want the arms of a character to share the same texture pattern.
But I can't place the UV shell corresponding to one arm on top of the piece corresponding to the other arm because it doesn't match without flip.
If I'm trying to flip this shell it becomes shaded with a semi-transparent red color. But all UV shells must be shaded with blue and have a clockwise winding order. Am I right ?
Is there a way to reverse the winding order so the UVs match the original half's without physically flipping the UV shell on the U or V.
View 4 Replies
View Related
Apr 18, 2012
I'm working on a project that needs to make a renderable shape off a curve, the curve points are based on a random set of data - so basically I'm making a fever chart. I need the curve to go exactly along with the points, so I used bezier curve. The curve looks like pic-01
Since curve doesn't show up in render, so i'm trying to make a tube shape.
1) a polygon plane, then go edit mesh - extrude. like pic-02. The extrude division is the same amount of points
2) a nurbs circle, then go surface - extrude. like pic-03 and pic-04.
As you all can see, none of these two look good. I can understand that this is because the turns are too dramatic, but I wonder if there is a way to get around the limit and generate a graph like pic-05 in 3d.
View 2 Replies
View Related
Oct 16, 2012
I have a character with UVs created and a texture assigned, now I need to add some additional polys to the character, how can I make sure the new polys I add are also added to the UV set and therefore get the texture map ?
View 1 Replies
View Related
Jul 19, 2011
I am trying to make 1 object out of 3 closed splines. I am a max user and this command is called Attach inside max. I am presently learning Maya as my new job require the rigging to be done inside Maya and instead of exporting my controllers aswell learn how to do it in Maya...
View 1 Replies
View Related
Sep 24, 2011
I am trying to make some trim work to go on a project of mine. Im using a shape then tryig to extrude down the curve is there a way to make the corner tight or a plugin to make trim work easier. you can see in the first image what im trying to make and the second my curve and what i get when im done.
View 1 Replies
View Related
Jul 31, 2008
I'm using Mac 10.4.11, PhotoShop 8, Epson Stylus Photo RX600 (and InDesign CS v3.1). The printer can do beautiful work when it all works together, but that is rare.
Will upgrading PhotoShop provide smoother color management tools? Other than that I have no problems with my configuration?
View 1 Replies
View Related
Feb 3, 2013
Sometimes I get xrefs that just seem to drag the system down - also on high end systems. This especially happens if I start throwing the view-cube around. Have you got any tricks on how to make such xrefs more "easy" on the system?
View 6 Replies
View Related
Jul 12, 2011
I have imported a model from C4D using the FBX importer, and everything was fine, except that it was way to big. I scaled it down to a more "manageable" size. So the scale reads 0.01 (All axis).
My question is, is there any way I can make Scale reflect the actual object size? Maya know these numbers, because they are present when using the universal manipulator tool. I would like it if the scene scale could reflect the real size of the object. So if i create a new object, the size relates to the size of the existing objects in the scene?
Can i put the real scale on the object, and then just "downscale the scene", so that the objects don`t appear giant? Like scene scale or something?
View 1 Replies
View Related
Apr 29, 2011
I'm using the Make Live feature on a low poly object to create new objects. For example, using the live object as a shell to create new polygon with the "create poly" tool. It seems to only want to snap to the center point of each face on the object.
View 1 Replies
View Related
Jan 27, 2012
Have to make an assembly manual consisting of 40 to 60 pages with mostly photos, very little text. I do not start on "wrong foot".
Can it be converted to say a PDF-document so that people without CorelDraw can open it on their computers?
View 5 Replies
View Related
Dec 12, 2013
I want to view folders in library to make sorting easier but my template of folders (created in Finder) will not show. Before I cull my images, I'd like to be able to sort/shove specific images into specific folders before culling. It appears that the only way to see these folders is to have an image in them.
How do I get these folders to appear in Library?
View 3 Replies
View Related
Oct 22, 2013
I am trying to make a mobster themed game, consisting out of puzzles. Every puzzle has the same background, which i am making at the moment.
The idea was a bricked wall, a bit cracked and with bullet holes. I got the brick wall, but i cant seem to get it to look more "real" also the cracks in the wall don't look realistic. For the bullet holes i bought some extra pencil sets. But i cant get the desired effect.
View 9 Replies
View Related
Apr 17, 2012
I've created a model of a monkey in Maya. The model is symmetric along the X axis - however, the UVs are not.
I've just gotten to the stage where I'm rigging my model and discovered that I'm missing polygons for a finger joint on both hands. I'd like to insert some edge loops for this extra joint. I could do this by just adding the loops by hand, but if I do that, they'll be a little bit off and my model will no longer be symmetric. Alternately, I could delete the right half of my model, add the loops on the left half, and then mirror and merge my geometry. This would preserve the symmetry, but completely destroy the UV info on the right half of my model.
This seems like it would be a common modeling problem. Does Maya have a way I can add the extra cuts to my model, preserve symmetry and not force me to redo the UVs and texture map for my entire model?
View 3 Replies
View Related
