have a question regarding audio float on an object:
some objects react from a certain point with sound by just using a simple box in height for an example...it grows in the height from bottom start point...but if i use the width the movement is going into 2 directions instead of 1 ...i tried to move the pivot but it has no effect....is there a way to tell the reaction he has an another start point ?
I am looking for a way to render a 3d model that reacts to an audio in real time. I know processing does the audio reacting in real time but I was wondering if this is possible to render a 3d object that react to the audio via after effect as well?
View 2 Replies View RelatedWe are just trying out Maya on the OSX Platform.
In the tutorial that we are going through, we are asked to select 2 curves, center the pivot point, and then hit the 'Insert' key to allow us to move the pivot point, and then holding down the 'C' key we should be able to move the pivot point along the curve.
Looking around we found that if you hit the 'fn + left arrow' keys you are meant to get the same as using the 'insert' key on the PC, but this is not right, and also when you try to hold down the 'C' key it does not allow the pivot point to be constrained to the curve.
So where is the 'Insert' key on the Mac?
I am puzzled about how to zero out rotation my object's pivot point when I rotate said pivot point using the "insert" key (on a pc). Furthermore, any subsequent object I make after that has its pivot point off just like the first object when I rotate its pivot point. In fact, even when I start a whole new scene, the pivot point rotation of any object is off just like the first time I rotated the first object's pivot point in a previous scene.
View 2 Replies View RelatedHow I can move pivot that camera rotate around?
View 6 Replies View RelatedI have a character model I got from the Evolver site before it went offline.
I need to set the pivot point of the eyes to be at the center of their meshes so I can use it in Face Robot.
I do this by clicking on the eye object and "Affect Pivot Only", "Center to Object". This works but when I export the model as FBX the moment the export has finished my eyes have both jumped to the the floor and my pivot is still in the correct place. When I import the FBX into Softimage I see the eyes are now on the floor. I also have the same when I try to do the pivot point in Softimage [URL]....I am a competent modeller however a begginer when it comes to Autodesk's software. Is their some property on the model that could make it peform liek this, does it have something to do with the bones/skining?
i have spent the last 2 days trying to move an eye balls origin
I have some objects (corridor / intersection corridor / surface / grading ...) in civil 3d 2013...When we rotate the 3d objects , object rotate pivot point about (0,0,0, or any place x,y,(z=0)..So rotated 3d object (if the Z= High value) can't be seen / can be seen as a point.
how to change the object viewer pivot point ? (not using steering wheel or zoom extents because of first time rotating objects seen so far )
im having trouble with a rotational object. I Basically made a basketball system in the category of specialty equipment. i made several different families in the same category and have nested one big family in specialty equipment.. I then loaded the nested family into a Generic face base template and change the caegory to specialty equipment, after completeing the steps i then loaded it into another family that is just specialty equipment. My problem is that, im either getting constraint problems when i set up my angular dimension parameter and try changing it's angle or when i do get it to change angles the pivot point keeps moving around...The main point is how do i get my pivot point to stay still and have my angle parameter change without errors?
View 1 Replies View RelatedHow to set a pivot point to the CENTER of a 3D object in AutoCAD 2014?
View 3 Replies View RelatedI'm animating a picture, have the limbs on different layers, so I can just simply use the free transform tool to rotate them into the good position.
Although it's a pain to always reset the pivot point from the center. Is there a way to make Photoshop remember where I want the pivot point to be?
How do you lock the pivot point of a light to the light itself? I thought just adding a Axis node would move the light and pivot point but the pivot does not move. Is there a way of parenting them together?
View 2 Replies View RelatedAll right so I'm animating a horse like creature with duik tools but I'm not sure how to get my face features to react along with the movement of the body. For instance I have the horse bring it's head down. Parenting was the first thing I thought of but when I parent the features; mouths, eyes, eye lashes, ears, etc; to the body it makes it to where they follow along with the body but not the right direction. Example; the mouth will still be facing to the right even if the head is looking down.
View 3 Replies View RelatedIs there any way to apply auto safe white/black point limiter to video and the same with audio?
View 2 Replies View Relatedim new to Ps cs6 i loaded four pics as layes i need to be able to float them like i did in the cs5 i cant find where to do it
View 3 Replies View RelatedI work with OpenEXRs 3D renders alot. While they are usually lossless at 32bpc, there are options to save at lossy 24-bit float and lossy 16-bit float with drastically reduced file sizes.(Photoshop still opens them up as 32bpc)
How do these compare to Photoshop's 16bit color? (Which I'm assuming is 16-bit integer?)At 16-bit float, I'm throwing out half the color information, but I'd still have vastly more color information than 16-bit integer? When do I really need 32bpc float? And when is 16bpc float "good enough"?
Is there a way to have all my files open as "floating windows" (the way it used to be) every time I start photoshop and/or every time I open a new file? I do not like the new interface and every time I open a new file I have to go to that drop down button and click "float all in windows".
View 5 Replies View RelatedIs it possible for the 'float all windows' option to stay or be permanent.
Despite setting this option everytime I open a new image it reverts back to the 'tab' option -
controlling a bitmap's tiling amount with a Bezier Float node in the slate material editor.
If I link a bezier float controller to the tile size of a normal bitmap (non real-world scale) it works as expected, i.e. if I set it to 4, then the bitmap tiles 4 times.
However if I link the float controller to a bitmap set to real-world scale, then it seems to work in reverse. i.e. if I set the float controller to 5, then the UV size appears as 0.005m, and if I set the bezier float controller to 0.005, then the UV scale size is set to 5.0m.
It seams as though in the second example MAX is taking the bezier float value, using it as a tile amount, then just for display purposes it converts it to a real-world size. I can work with it now that I know what it is doing, but it is a little unintuitive.
is there a way to make the setting under Arange float all in window the default I keep haveing to set this as I like to have abunch open at the same time?
View 2 Replies View RelatedThe program seems to run fine except that I cannot move or float the panels. They move ever so slightly and lock in place when I attempt to drag them. The only way to get them back is to do a workspace reset.
I am running Vista 32 bit, Nvidia 8600gt, Intel core 2 duo 2.33hz, and 4gb ram.
I have the Production Suite CS4. I can move panels in every program but Photoshop.
I have reset the configuration folders, tried a selective startup in msconfig and reinstalling Production Suite.
How can I get "Arrange - Float all in window: " to be the default?
View 2 Replies View RelatedI have learned basic skills with VS x4, and made a couple of videos with animated stills, and voice overlay, but I want to do something more sophisicated now. I'd like to have either a still or video background, with objects (images or text) "orbitting" over it, that is floating across the screen in a smooth trajectory. Is that possible to do inside VS without a camcorder or other handheld? If so, can you give me a brief description of where to look in the menus, what to do, and I'll work on it from there. I assume it will involve some superimposed tracks. But how can I create objects moving along a smooth path?
View 5 Replies View RelatedI have somehow managed to get the tool settings in Maya 2011 to be "floating" in its own panel. I don't know what I did that made that happen, nor what to do so the panel won't be "floating" anymore.
I know it must be something simple to fix, i'm just not sure how to fix it.
I have attached an image to try to show what I meant by "floating" tool settings in Maya 2011.
I'm no longer able to select "Float in Windows" or Float All in Windows". These items don't activate; they remain dark. I can see only one image at a time now. How to get it back?
View 3 Replies View RelatedI am In elements 11 editor expert mods. I go to "windows" and wish to select "float all in Windows" but it is not in bold and I cannot select it. Why?
View 1 Replies View RelatedI just downloaded the PSE 12 trial, and see the "all floating" tab in the layout menu, but it is locked and I can only use the default layout. Are some features not avaliable in the trial that will be in the paid version? I'd like to know before purchasing it.
View 1 Replies View RelatedIn CS5, you could have mulitple images open in tabs, and there would be no additioanal padding around the canvas area; the image would lock in place to the upper left.
Now in tabs in CS6, the canvas floats in space. Any way to have tabs and get rid of the space/padding?
This query is with regard to a Wire-removal/Touchup process in dealing with16Bit(half float) EXR files. Here is the process we adopted.
- Opened a 16Bit (Half float) Exr file in Photoshop, which showed it as 32Bit file
- Since the footage has lot of fire/blast elements among which we need to erase a "WIRE", we need to use "Healing Brush" which doesn't work on 32Bit files. When we tried to 'Convert' 32 Bit file to 16Bit file directly, we get a 'Washed Out' problem, since the shot is over exposed due to Fire/Blast elements in it. So here is a pipeline we used.
---- Added "Exposure" (Image > Adjustment > Exposure)
---- Set the "Exposure" to -5 (since it is a over-exposed frame, value -5 depends on exposure values of shots)
---- File > Export > Render Video (OpenExr output)
---- Open the above render file in photoshop
---- Convert to 16bit (Image > mode > 16bit)
---- Use any 16 bit tool for cloning (Eg. Healing tool)
---- Added "Exposure" (Image > Adjustment > Exposure)
---- Set the "Exposure" to +5 (Reversing)
---- Convert to 32bit (Image > Mode > 32Bit)
---- File > Export > Render Video (OpenExr output)
After rendering out, we checked the "original footage" with the "output exr" and apart from the Touch-up (wire removal) portion, all other details remain the same. Since this is a high-end hollywood project, (professionals) confirm whether this process is safe.
During the process we found a bug that this process only works, when we render whole footage, meaning if we try single frame, then there seems to be a slight color difference only in the overexposed area.
When we opened the client input EXR file, under Nuke it shows as "16 Bit (Half float)" but the same when opened under photoshop it shows as 32 Bit file.
I have several objects in a circular array. I want them to pivot on the y axis only so the Z faces toward the camera. How do I do this without the other axis (X,Z) rotating as well. The look at constraint wants to pivot on all three axis.
View 3 Replies View RelatedOn one machine, we can´t move the pivot point of an object. On another machine it´s no problem.
View 7 Replies View RelatedI would like to modify the 16-bit Float EXR compression for my Framestore / Media Storage. What is the syntax? I would like to use 16 bit half with Zip16 (16 scanlines).
I am currently using "floatVideo=EXR:ZIPS:16" and several variations with no success.
SMac 2013 Ext1
3.33 GHz 6-core Intel Xeon
48 GB 1333 MHz DDR3 RAM
K5000
AJA Kona 3G
ioFX 1.6 TB
Eizo ColorEdge CG276W (artist monitor)
Sony XBR 4K UHD Display (client monitor)