For some reason some of the joints in my character rig are displaying their local rotation axis and I am unable to turn them off. The usual Display>Transform Display>Local Rotation Axis doesn't do it. This doesn't apply to all joints, just some. This is very frustrating as it causes real clutter when rigging.
View 1 RepliesIs it possible to change the display size of the local rotation axis?
I'm trying to visually align the local rotation axis for joints with geometry that isn't always world axis aligned. I've searched on different forums as well as searches on "topeka" (google ), and I've come up with nothing so far.
So perhaps I'm missing something blindingly obvious, but in previous versions of Maya, I've been able to simply hit F8 and check the '?' icon to be able to go in and individually rotate Local Rotation Axis to be the way I want.
For some reason I cannot find how to do this now in 2011? I've only been able to do them using the auto-tool.
Looking for the steps I need to take to be able to manipulate the local rotation axis individually as I have in the past now?
When setting up a simple FK control curve on say the wrist for example, many times the control curve isn't exactly perpendicular to the local rotation axis of the joint movement, so when we position the control curve to be perpendicular to the joint - it has a rotational value added, but the rotational handles are lines up with the rotational handles of the joint that we want to move.
Freeze Transformations: then the control curves rotational handle go back to being skewed (out of alignment with the joints)
We want to Freeze transformations before constraining the curve, but we'd really to keep those rotations control handles to remain aligned with the joints rotational handles. This will make it an exact control when animating - grab the rotational handle of the curve, rotate it, and the joint will move exactly in the proper direction.
how to get the rotational handle of any control curve to run perpendicular to the shape after freezing transformations?
Definition about world and local axis,What is different between both.
View 1 Replies View RelatedI am busy working on rigging a character ( See attachment) to the best of my abilities and am running into some issues:
I have made a nurbs curve object which I intend to use as a controller in my rig, I have however modeled my character with his arms in a 45 degree angle so I snapped this particular object to the wrist and aligned it with the geometry...here comes the fun part , because it is a controller I wanted to have a clean channelbox zo I froze transformations which neatly sets every channel to 0, it also snaps the local axis to a world pivot orientation....
I went in componentmode pressed the question mark thingy and thought it was working..but it still alters the values in the channelbox.
I basically want the same rotation axes editing capabilities as I have with joints, I will try fiddling with that next, but I can't believe that this can't be solved any simpler.
See the image in the attachment
how do you adjust the rotation axis of a joint. Attached is what am talking about.
View 2 Replies View RelatedTake a sphere, transform it in both location and rotation. Now you want to make it's new transform and rotation zeroed out so so that it still rotates around it's local axis but all its base values are zero. If you just freeze transforms, it puts everything to zero around the world axis not the local axis. This is not what I want. I want to be zeroed around the local axis.
Win 7 Pro 64Bit
i7 980 Extreme 3.33Ghz
24Gb Ram
NVidia Quadro K5000
I'm trying to find a way to have an object's rotation axis match it's parent's. In Softimage, this can be done with Freeze Rotation Transform (or some similarly named command), and it will reorient the pivot axis to the parent's. Trying to find Maya equivalent.
It's not important that it match it's parents transform. If there is a way to have an object match any other object's rotation axis, yet maintain vertex positions in world space, that's just as good.
I am currently following the getting started guide for Maya 2011 and I have come to a portion where it is required to use the Extrude tool to extend a part of the helmet.(page 100 : Polygonal Modeling / Lesson 1 / Extruding polygon components)
Everything is fine up to this instruction 5 Click the large circle that surrounds the manipulator to display the rotate manipulators and then drag the green circular manipulator to rotate the angle of the extrusion to match the angle in the reference sketch (see image) and then drag the arrow manipulator a second time to extrude a second section of mesh.
The actual problem: On my scene, when I click the circle that surrounds the manipulator, the 3 axis' rotate handles appear,but they disappear as soon as I release the mouse button (It is the same behavior if I move and if I do *not* move the mouse before releasing).
I've been using maya since 8.5 and there's a notorius bug that will probably be never addressed by maya developers. I just upgraded to 2012 and am getting this again: // Warning: Could not find an appropriate startup camera: side. A substitute will be used.
And i took all the preventive actions: window size and position are not saved with file, i always go back to four view before saving, etc. Still no joy.
In fact the side camera is not missing, it's right there and fully functional. What happens as a consequence of this error is that one of the rotation axes in perspective view are locked, i can't rotate my scene around the Y axis.
It doesn't work either if i export my object and import it back into a fresh scene. Axis remains locked. I'm losing my scenes that i've put insane amount of work into. No hope to restore them.
I've created a mech robot and now I want to create a rig for it. But the problem is, that none of the joints are 'ball and socket joints'. So the joints can only rotate in one dimension, like a typical mechanical joint. My first solution was simply locking two out of three rotation axis for the bones and this works fine for FK animation. For IK animation however, it doesn't work. The locks are simply ignored.Is there any way to lock a rotation axis for an IK bone system?
View 5 Replies View RelatedI am in the process of doing an animation for a PPT presentation. I have several series of images like the one attached which represents a card with some holes in it flat (if you like) on the desktop. I'd like to rotate the image 30 degrees about its vertical axis giving the (isometric) impression that it faces to the right (or left). Is there a functionality in Paint.NET which can achieve this?
View 9 Replies View RelatedI set up SDKs on my character's fingers. Everything was working fine. Fingers rotated properly from the open hand "0" position to a closed fist at the "10" position. I have the hand set up as the Driver and the fingers as the driven.
I then wanted my IK arm to work in FK, so I went into my attribute editor for IK pole vector constraint and checked on "IK/FK Control". I did a few rotations of the elbow joint and everything seemed fine.
I then went back to do some work on my hand, and when I when to change the values in my channel box to get the hand to clench, the fingers did not rotate into a fist, but rather went in all directions.
I can get the hand to work correctly intermittently (when I go back to the bind pose), so I know the correct rotation information is there. I have tried deleting history and making sure translations are not set on the hand. Would this be a gimbal or a local vs. global orientation problem?
Also, a side question: I noticed that when I built the SDKs for the fingers, I had numerous "blendWeights" created. Are these weights involved with moving the fingers between the minimum and the maximum values you set in the SDK set-up process?
i am a 3ds max user but had to switch to maya for this project. I am trying to make the ctrl pivot axis to follow the bone axis but I dont know how to do it in Maya.
View 1 Replies View RelatedI did the bones, but as you can see in the picture, the rotation not along the bone, is according to xyz, might be because i freeze them?
How can i rotate the bone accordingly? is there a way to rotate it local, and global like in Softimage?
I have an object that I want to rotate different.... not sure how to explain, it, but you can tell what I want by looking at the screenshot attached. I want the rotate to align with the cylinder. I've tried reset transformations, and the home key to move the pivot. I've also tried the different settings for the rotate settings and nothing is changing this angle. Is there a way to manually set this?
View 3 Replies View RelatedIf there is a quick easy way to spin an object, rotate it on one axis through the 360 degrees a number of times.
View 2 Replies View RelatedI am animating a ball right now, that is rolling all over the place. Would be cool to animate just the translation of an object and not to worry about rotation. Is there a way? Like.. through the expressions or set driven key? Also would be even better if rotation speed increased as the movement speed did.
View 2 Replies View RelatedI have set rotation limits on all of my joints in a rig. But when I move the Ik handle, the joints all rotate in however they want.
What can I do to make it so that when I move the IK handle, the joints are constrained to their individual limits?
I used to be able to create quick a makeshift skeleton for things like robots by parenting the objects that make up the robot to each other hierarchically. But the past few times I've tried to do the same thing, the child objects deform in weird ways when I rotate the parent. I looked and found a few references to this in forums, but not a single solution. The idea of going through and setting up either a proper skeleton, or parenting everything to group objects seems unnecessarily complex and frustrating when there was a simple solution before.
View 3 Replies View RelatedWhen I set up the Image based lighting in Mental Ray, and key the dome that is created to rotate in a animation, it is clearly rotating in the viewport, and when I render individual frames, it works, but when I batch render (confirming that the render range is set correctly) it renders each frame with the dome in the same position.
View 1 Replies View RelatedI am having trouble with setting rotation to other then linear for the IK Controls, the FKs work fine. Is this some limitation, or option that I am missing ? Also, the keys are displayed as diamonds instead of the usual squares, so I guess there is some lock which I cannot find.
View 1 Replies View Related1. Windows/Animation Editors/HumanIK/Skeleton Generator - Generate Skeleton
2. Create control rig for it.
3. Set keys to rotate shoulder down and back.
Keys are linear by default and cannot be changed, except to "stepped". Clicking Spline, Auto, etc. Doesn't change anything. Works fine on translation curves. URL....I accidentally check the "force FIK curves to linear" button? It's totally killing our animation pipeline.
Is there any way I can extract the rotation of a block relative to the yz axis and xy axis. I can extract the insertion point and xy rotation but not the yz and xz.
View 9 Replies View RelatedI want to know after rigging why should i orient joint in the attribute editor using the channel "joint orientation". Because i can easily fix the rotational axis after rotating the bone and freezing transformation.
View 2 Replies View RelatedMy current goal is to specify the rotation and translation of an object using a text file full of numbers. I have been told that I should import a "move" file. However, I can't seem to find any kind of reference about the move file format or how to use it. I see in the import dialog box that there is a file type called "move" but I don't know how to format the data that I put into the "move" file.
Also, I tried to export a "move" file so I could take a look at what Maya generates, but I keep getting the error "// Error: Could not save file "C:/My Documents/maya/projects/body_in_ocean/scenes/examplemove.mov".
I created a group with my object in one file, referenced it in my working file, moved the group around and set some keys in the working file, but I can't seem to export any move data. How to get this to work?
I'm rigging a shoulder pad to a biped and I'd like it to only rotate on one axis. Google hasn't been that useful, and I hope I don't need scripting for this kind of minor thing. I'm rather new to 3Ds Max Design but I'm learning fast and liking it so far!
I've attached what I want to effectively accomplish. I'm looking for a way to lock the z-axis of the object with the upper arm's z-axis.
EDIT: Reduced picture size.
I am having some trouble with moving vertexes on their local axis. When I move a vertex with the move tool (in local mode) the vertex moves REALLY fast and what is causing it. It works fine with the view coordinates enabled but just not on local.
View 2 Replies View RelatedWhen you rotate an object less than 1 degree, the local axis is no longer aligned with an object?
For example you have a wheel which rotate nicely along it's central axis, then you tilt the wheel by 0.5 degree and when you rotate around it's central axis, the wheel wobbles. The pivot point actually doesn't rotate with the object for rotations less than 1 degree...
EDIT: Video demonstrating the issue: [URL] ....
how do I scale a group of polygons in their local axis? I have seen people doing this fine in Maya.
I have attached an image that explain this clearly. It's a simple cylinder, extruded and when I scale the extruded polygons in local x axis, they get scaled in crazy different axes.