Maya Modeling :: Get Distorted UV Map When Polygon Is Smoother
Feb 24, 2012When I apply a Uv map into my model it fits very well. But when I apply Smooth, it gets very distorted. How can I resolve this.
View 9 Replies
ADVERTISEMENT
Maya Modeling :: Settings To Mirror Cut Poly And Smoother Operations
Dec 20, 2011Im having issues using the mirror function in the "move tool".I select mirror geometry with these options : -x, merge with original, and merge vertices.
This copies my model and allows me to adjust both sides of the model by selecting a single vertex on either side.
"Is there a way I can set Maya to also mirror my cut poly and smoother operations?" As it stands now, Only the vertex's that existed when i mirror geometry are visable on both halves.
Also my center vertices are not attached to each other. So when i try to apply smoothing to the entire model it smooths right through the center of the head, basically creating two halves. Both halves are registering as the same poly.
Maya Modeling :: Cut Out A Piece Of A Polygon
Aug 21, 2012[URL]........
This is my model. Simple.
Now the only thing I want to do is to cut out this:
[URL]........
I used the Extrude tool just for visualization. The problem is, working with booleans apparently doesn't work for such objects, it works for freshly created clean polygons, but not for this one, when I try to use "Boolean difference" both objects disappear.
Extruding doesn't work because the faces are still there and I cannot delete them for whatever reason:
[URL].........
My cursor is pointing on the little face, but both are being highlighted. Making a hole through the the "Make a hole" function doesn't work because it only deletes faces as it seems.
Maya Modeling :: How To Select Only One Polygon
Sep 8, 2011First of all I am new to Maya, only 4-5 hours of playing through the menu and I've stumbled upon a big issue for me. I can't select polygons after I've deselected them, I can only right click- select all but that's useless when I want to work on just 1 polygon. How to select a polygon?
With NURBS, the "Select Tool" works just fine, but with Poly, nothing happens.
Maya Modeling :: How To Select A UV On Polygon
Feb 13, 2011I select a UV on my polygon and it gives me two corresponding uvs in the texture editor, i`ve tried sew uvs and merge uvs in the texture editor but it doesn`t seem to work, is there something i should know?
View 2 Replies View RelatedMaya Modeling :: Use Create Polygon Tool
Oct 12, 2011I'm trying to use the Create Polygon tool. My problem is that when I click to create a polygon I don't see anything. I can keep clicking and clicking to create points, which it apparently IS creating, but I don't see anything until I switch through one of the View types (wire frame, shaded, etc.).
I know I'm supposed to see the verts the second I click but that's not what I'm getting, it's more like I need to just go through the motions of blindly creating my shape, change views, and then edit the resulting verts and edges later.
Maya Modeling :: How To Rotate A Polygon Manually
Apr 13, 2013I need to rotate a polygon manually so that one of its vertices snaps to a vertex/edge/face of another polygon. How can that be done?
View 2 Replies View RelatedMaya Modeling :: Split Both Sides Of Polygon
Aug 23, 2011I added 2 split lines to this polygon using the split polygon tool but the other side didn't split. how can i split both sides together in order to make it equally?
View 1 Replies View RelatedMaya Modeling :: Create Many Holes In Polygon?
Mar 22, 2012I am self taught and only using maya for about 3 months now but the situation where an object that needed many small holes has caused me some problems 3 times now.
In the current situation I am essentially modeling a CPU and a CPU socket. there is ~240 pins on the cpu and that will connect with the socket where there should be 240 holes to match.
The only method I know is boolean difference but that causes the entire polygon cube to disappear instead of creating a hole in it.
what is another method for creating many small holes? another example is a piece of formed metal that has small holes in it for air vent.
Maya Modeling :: Can't Get Selection Handles On Polygon Faces
Aug 12, 2011in order to get a head start on my next class, I bought the book: Introducing Maya 2011 by Dariush Derakhshani and have been following along with the tutorial projects within.
The issue I am having is probably a silly noob thing, but I can't get the selection handles (for polygon faces) to show up on a simple polygon sphere. I can see the handles on the corners of individual faces, but not the ones that are supposedly in the center of each face.
I have tried going to Display > Transform Display > Selection Handles but nothing happens. I have tried this while selecting the sphere with options under both "Select by Object Type" and "Select by Component Type" with no results.
I am running Maya 2011 on a Macbook Pro on OSX.
Maya Modeling :: Unable To Select Face Of A Polygon
Aug 27, 2012I have attached a picture of what it continues to do when I attempt to select a face of this polygon I revolved from a cv curve tool line. Accidentally copied dual screen. I have been running into countless problems while trying to manipulate this revolved surface like a polygon but there is something stopping me. How do I just select an edge or a face without the entire thing lighting up with yellow dots and not actually selecting anything! I try to hold shift and click other faces but that doesn't work either!
If I could somehow delete the action of revolving a line to treat the independent tessellations as one uniform polygon. I am very new to this program and I don't know where history might be.
Maya Modeling :: Split Polygon And Can't Merge Border?
Jul 13, 2012I have a model of gums and a set of teeth. What I am trying to do is create an animation where the fourth tooth back on each side of the upper gums disappear then create a blendshape causing the front teeth to move back and fill in the gaps as well as condense the gums so there isn't a gap here either. I am not exactly sure what the best way to do this would be, I am newer to Maya. My question is; Is there and easier way to do this because once I delete the faces and have a divides mesh I go to Mesh->Seperate and select Vertex mode on both and combine the meshes manually by selecting each vertex with the move tool and while holding "V" dragging the vertex over to the adjacent vertex on the opposite mesh. The issue im having is that the width of the mesh starts smaller upfront and progressivly gets bigger as you move to the back of the gums so by deleting a middle section the two meshes dont line up. The back mesh is much wider than the front. I am also worried that when i go to create a Blendshape to transition from the origional mesh to the new shortened one that will pull the teeth back to a perfect smile. I have heard that when creating a BS both meshes need to have the same number of Vertices and after removing a section mine wont. I am also concerned because after the two meshes have been sewn using this process I am left with an ugly point of intersection all the way around my mesh that has proven difficult to blend using the 'Sculpt Geometry Tool' with a falloff/Soft Mod.
View 3 Replies View RelatedMaya Modeling :: Input Tab Not Showing Up When Creating Polygon
Jan 19, 2014My Inputs tab dont show up when I create a polygon, so i can't edit subdivs? Happens when i try to add subdivs to a newly made polygon primitive.
View 1 Replies View RelatedMaya Modeling :: Why Does The Split Polygon Points Disappear
Jun 23, 2011Im supposed to connect them like they're displayed in the picture. I did both of them separately but i just did all four to show how i want them. Im supposed to connect those two but when i press enter when im done, it disappears. Then use the insert edge loop tool to make the neck line smaller.
Both Pictures are the same. The second one just has backface cullin under display
Maya Modeling :: Can't Find Split Polygon Tool
Jul 19, 2012I'm following a tutorial in 2012 (Modelling a polygonal mesh) which states 'Select Edit Mesh > Split Polygon Tool'. There is no such tool listed in the Edit Mesh drop down and I can't find it anywhere.
View 2 Replies View RelatedMaya Modeling :: Can't Select Polygon Objects Or Faces Properly
Dec 13, 2011i'm having a lot of troubles with a free rig i downloaded at creativecrash [URL]. I'll keep it short as i have quite a lot of things to explain: I animated my shot, and everything was ok. Now i have to shade/light/render my shot using vray, trying to create brand new vray materials; I started from my robot-character. Here comes the problems: - I can't select the polygon geometry(i asked the rigger, and he said the geometry were imported as references at rigging time). There are no geometry layers in reference or template, then there must be somthing else causing me the problem. I can access to the object via hypershade, i can click on the shape node and i can see the geometry selected, but then, when i try to access faces, i can't select them!in no way. This means i can't create selections for materials, and so i can't shade as i liked. I tried to selecte faces using the select by materials feature in the hypershade (as the character has some pre created basic materials)but again, i'm not free to assign materials where i want, and i just can use the pre-existing face selections and work on those, but it's not enough for me. [URL]
View 2 Replies View RelatedMaya Modeling :: How To Turn Polygon Face With Selection Handle Visible
Oct 26, 2012How to turn polygon face with selection handle visible on (every small dot that appearing in the middle of each face). I'm a Maya starter.
View 2 Replies View RelatedMaya Modeling :: Make Live Snapping To Polygon Face Center?
Apr 29, 2011I'm using the Make Live feature on a low poly object to create new objects. For example, using the live object as a shell to create new polygon with the "create poly" tool. It seems to only want to snap to the center point of each face on the object.
View 1 Replies View RelatedMaya Modeling :: Edit Mesh Menu And Select Split Polygon Tool
Jun 3, 2011I am a newbie, and doing the helmet tutorial. It is asking me to go to the edit mesh menu and select the split polygon tool. It isn't there. where is it.
View 5 Replies View RelatedMaya Modeling :: Fill Hole With Polygons Then Clean Up With Split Polygon Tool
Aug 20, 2012I am building some geometry and need to fill in this area, (ie fill hole with polygons then clean up with split polygon tool) but I am new to nurbs and am trying to do this model with nurbs. I usually use hull mode and move the hull down into the piece of geometry, but it won't move correctly that way.
So in the picture below i am trying to fill the red area and have it go into the green surface. The curvature of the green area makes it not line up correctly(ie fitting to the curvature of the green surface) when using the "moving hulls" approach. I was seeing if there was an easy way to go about this.
Maya Modeling :: Polygon Split Tool Does Not Split All Polygons
Sep 2, 2013I made all my polygons with the same technique but somehow interactive polygon split tool does not split all polygons... I attached a file with which I have problem. Split tool just "disappears" after submitting changes...
View 1 Replies View Related3ds Max Modeling :: Create A Polygon From Selected Vertices
Aug 28, 2011I used to use lightwave. With lightwave I could select vertices and then press the "P" key to create a polygon from the selected verts.Now, with max I have found the "create" feature. When using an editable poly, in poly select mode, I select the "create" button and this allows me to do 2 things:
1 - I can create a poly out of nothing by clicking empty space
2 - all verts from existing objects become visible and I select the verts I want to create a new poly.
These seem like really cool tools, if it wasn't for one small detail..With "#2" if I engage the create button, and select a vert - I can no longer rotate around the object and look at it from different angles (by pressing alt+center mouse) UNTIL AFTER I have created the new polygon.
This small detail is kind of annoying because with certain intricate models, I may need to move it around to get to the next vert in line. The only way for it to work, it to make sure I can clearly see ALL verts needed for the new poly with no other geometry or objects obscuring them before starting the create button.
Is it not possible to simply go into "vert selection mode" select a collection of verts (in doing so, be able to rotate around the object between making the selections) and then after I have made my selections simply click a button or key to create a new polygon from the selection?
3ds Max Modeling :: Combining Multiple Elements Of Polygon
Nov 4, 2013I have a editable poly with multiple elements (all '2D' on the same plane). Some of the elements intersect each other. How do I combine or merge them together?
See attached.
3ds Max Modeling :: Create Normals On Both Sides Of A Polygon?
Oct 20, 2011Is it possible to create two normals per polygon, one for each side in 3dsm? I need to export a .obj with normals on both sides.
I know how to flip, unify and use the "2 sided" materials in 3dsm but thats not enough unfortunately.
3ds Max Modeling :: Polygon - Material IDs And Smoothing Groups Dialog
Sep 26, 2013I use the "Polygon: Material IDs" and "Polygon: Smoothing Groups" section (located in Editable Poly) a lot. I was wondering how I could break it off as its own floating dialog box.
Ideally it would be very similar to the Material Editor. Where I can hit a short cut key to bring it up and hide it. I can drag it around and move it to a second monitor or may be even minimize it Having both the Smoothing Groups and IDs in one dialog box would be ideal.
Maya :: Interactive Split Polygon Tool
Aug 19, 2012Sometimes when i want to add an edge between two others edges, the tool just does not create a new edge and I don't see any error popping. Some other time, it will create an edge but it's not going to place it where I wanted it to be. I would like to know how I could fix this problem and or what should i change in the option box.
View 3 Replies View RelatedMaya Modeling :: Character Modeling From Animation Academy
Oct 14, 2011I have a problem when I am modeling my character or rather the character from the animation academy. I have created an NURBS sphere and I want to adjust it to the arm, so I go to the component mode add some isosparms and then it happens!!! I can´t move any vertexes... but in the object mode I can move the hole object.
View 1 Replies View RelatedMaya :: Unable To Find Polygon Transparency Sorting
Apr 29, 2011I just started using Maya 2011, and in 8.5 the view window had a dropdown menu to change the viewport to polygon transparency sorting. Well there is no dropdown menu in 2011. So where do I change it? I can't tell if I'm clipping my model onto itself without doing a render.
View 4 Replies View RelatedMaya Animation :: After Effects - How To Animate Growth Of Polygon
Jan 21, 2013I have worked on After Effects and recently started doing my Motion Graphics work in MAYA. I made some models using the Polygonal Mesh primitive objects for logos etc etc.
I was wondering if I can animate the growth of an object as though it is being formed formed in 3D space. I tried doing this by taking it in AE but it becomes a Flat image and I loose the z dimension, thus I can only move the mask in X & Y axis.
If there are any tools to animate or any Keywords that I can explore to make this job feasible. I do not want to pull down the transparency and animate it as then it makes the entire object disappear or visible at the same time.
Maya :: How To Import CSV Data To Create 3D Polygon Mesh
May 20, 2012I need to import .csv data with surface parameters obtained from a microscope in Maya. I also want 3D polygon mesh to be created from that data.
View 5 Replies View RelatedMaya Animation :: Skin Conversion To Muscle System Without Converting Every Single Joint To Polygon Bone Object
Nov 10, 2011Any way to do the skin conversion to muscle system WITHOUT converting every single joint to a polygon bone object. I'd prefer to manually create the muscle bone objects from only the joints I plan to use for the muscle system, and then do the skin conversion using only those joints already converted. Basically, I only need a few muscles in this system and therefore only need a few polygon bone objects, but as far I can tell, there is only one way to do the skin conversion and it automatically converts every joint that the skin is attached to.
View 5 Replies View Related
