3ds Max Modeling :: Polygon - Material IDs And Smoothing Groups Dialog
Sep 26, 2013
I use the "Polygon: Material IDs" and "Polygon: Smoothing Groups" section (located in Editable Poly) a lot. I was wondering how I could break it off as its own floating dialog box.
Ideally it would be very similar to the Material Editor. Where I can hit a short cut key to bring it up and hide it. I can drag it around and move it to a second monitor or may be even minimize it Having both the Smoothing Groups and IDs in one dialog box would be ideal.
Sometimes, during the process of exporting and importing OBJ files between apps, when the model lands back in Max I find that I cannot edit the smoothing groups. They're locked in. The only work around I've found is to export it back out of Max without smoothing groups, then bring it back in.
I have a model rigged with The Setup Machine and The Face Machine and a single material is applied to each of them. Not sure if the above is relevant, but when I tested this in a clean scene with just a sphere, everything was fine.
I then select a few faces and apply a new material to those faces. I smooth the mesh and the UVs are smoothed and the different materials appear where they should be. If I set the divisions on the polySmoothFace node to 2 or more the materials seem randomly placed across the mesh. The Uvs however, are smoothed correctly. So I then have to reassign the materials to the correct faces.
If I do one smooth mesh, then another separate smooth mesh, the materials are placed correctly.
Is this a bug or do you think something is wrong with my setup?
Core i7-2600K 8GB RAM Win 7 Professional Maya 2011.5
I have a model I am trying to smooth all of the faces on, a slightly distorted sphere. For some reason the faces won't smooth even though they are all in the same smoothing group.
At this present time I would consider myself a high end beginner at 3ds max.
I am currently trying to model a mech and have been trying to smooth it. I have made progress but I don't know where to take the geometry from here. There are numerous smoothing errors in the model and I understand why they are happening, I just don’t know the right way to fix them. You will understand what I mean if you have a look at the model (I've attached it so you can download it).
For example, in the first image you can see an error, if I extended the edges this may get rid of it, but then I get the result in the second image, and it doesn't look right .
I'm trying to model a pillow and I want the top and bottom symmetrical with a round "tubing" around the edges. The problem is that it wont smooth using nurm smoothing across the seem, so i get a fissure where I wanted the tube.
I noticed that in 3ds max 2012, when i split an edge or detach a polygon the smoothing at that point changes and seam is visible. I think that in previous versions when i did the same thing the smoothing remained. Is there a way to prevent this?
I often work with Civil Engineers and I use line work from Civil programs such as 3D Civil and Bentley MX. These programs give me splines (see image 1). I trace over the lines to create poly surfaces which may end up being grass or concrete etc (see image 2)
I don't use the terrain command because the command is not always suitable. The lines I import often have gaps or other issues thats why I find it faster to trace over the lines to create my poly surfaces.
But if you look at image 2 it's very blocky. I would like to smooth between these surface to make the terrain look more natural. I have played with turbosmooth and meshsmooth but sometimes they screw up the surface or don't work at all.
How I could make my surfaces more natural and less blocky.
Any way to fix this (Picture 1) in either at the poly or subd stage. I have experimented with bevel and can reduce it but is there a way to smooth it out completely.
I am having a problem with extruding faces on polygons and then smoothing them. Maya does not seem to want to keep my faces together, and instead, splits them up.
I extrude without smoothing and it looks fine, but after smoothing, everything splits up.
I have been trying to figure out if there is a more efficient way of doing this for some time. It seems so basic but it always comes to play in my smoothing process.
For all you more experienced modelers, what is the best way to have the edges and corners stay at their 90 degree angles when smoothing while not compromising the roundness of the surface with artifacting or pinching in the corners. I find this problem when creating extrudes with sharp corners on curved/ round surfaces then smoothing them.
I'm having trouble with a high poly model. It's too big for my system right now to use in a complex scene, so I want to use a MR proxy to instance it. However the model I have(I wasn't the modeler) is composed of a lot of objects, more than I'm willing to make a proxy for. I tried to make a group out of them and make that a proxy but that doesn't seem to be possible (MR proxies can only store 1 object?)
So my next step was to combine them into one object via attach, however when I do that the smoothing gets really screwed up (see attached jpgs). Any tips for keeping smoothing per object as I add them?
Now the only thing I want to do is to cut out this:
[URL]........
I used the Extrude tool just for visualization. The problem is, working with booleans apparently doesn't work for such objects, it works for freshly created clean polygons, but not for this one, when I try to use "Boolean difference" both objects disappear.
Extruding doesn't work because the faces are still there and I cannot delete them for whatever reason:
[URL].........
My cursor is pointing on the little face, but both are being highlighted. Making a hole through the the "Make a hole" function doesn't work because it only deletes faces as it seems.
First of all I am new to Maya, only 4-5 hours of playing through the menu and I've stumbled upon a big issue for me. I can't select polygons after I've deselected them, I can only right click- select all but that's useless when I want to work on just 1 polygon. How to select a polygon?
With NURBS, the "Select Tool" works just fine, but with Poly, nothing happens.
I select a UV on my polygon and it gives me two corresponding uvs in the texture editor, i`ve tried sew uvs and merge uvs in the texture editor but it doesn`t seem to work, is there something i should know?
I used to use lightwave. With lightwave I could select vertices and then press the "P" key to create a polygon from the selected verts.Now, with max I have found the "create" feature. When using an editable poly, in poly select mode, I select the "create" button and this allows me to do 2 things:
1 - I can create a poly out of nothing by clicking empty space
2 - all verts from existing objects become visible and I select the verts I want to create a new poly.
These seem like really cool tools, if it wasn't for one small detail..With "#2" if I engage the create button, and select a vert - I can no longer rotate around the object and look at it from different angles (by pressing alt+center mouse) UNTIL AFTER I have created the new polygon.
This small detail is kind of annoying because with certain intricate models, I may need to move it around to get to the next vert in line. The only way for it to work, it to make sure I can clearly see ALL verts needed for the new poly with no other geometry or objects obscuring them before starting the create button.
Is it not possible to simply go into "vert selection mode" select a collection of verts (in doing so, be able to rotate around the object between making the selections) and then after I have made my selections simply click a button or key to create a new polygon from the selection?
I'm trying to use the Create Polygon tool. My problem is that when I click to create a polygon I don't see anything. I can keep clicking and clicking to create points, which it apparently IS creating, but I don't see anything until I switch through one of the View types (wire frame, shaded, etc.).
I know I'm supposed to see the verts the second I click but that's not what I'm getting, it's more like I need to just go through the motions of blindly creating my shape, change views, and then edit the resulting verts and edges later.
I added 2 split lines to this polygon using the split polygon tool but the other side didn't split. how can i split both sides together in order to make it equally?
I have a editable poly with multiple elements (all '2D' on the same plane). Some of the elements intersect each other. How do I combine or merge them together?
I am self taught and only using maya for about 3 months now but the situation where an object that needed many small holes has caused me some problems 3 times now.
In the current situation I am essentially modeling a CPU and a CPU socket. there is ~240 pins on the cpu and that will connect with the socket where there should be 240 holes to match.
The only method I know is boolean difference but that causes the entire polygon cube to disappear instead of creating a hole in it.
what is another method for creating many small holes? another example is a piece of formed metal that has small holes in it for air vent.
in order to get a head start on my next class, I bought the book: Introducing Maya 2011 by Dariush Derakhshani and have been following along with the tutorial projects within.
The issue I am having is probably a silly noob thing, but I can't get the selection handles (for polygon faces) to show up on a simple polygon sphere. I can see the handles on the corners of individual faces, but not the ones that are supposedly in the center of each face.
I have tried going to Display > Transform Display > Selection Handles but nothing happens. I have tried this while selecting the sphere with options under both "Select by Object Type" and "Select by Component Type" with no results.
I have attached a picture of what it continues to do when I attempt to select a face of this polygon I revolved from a cv curve tool line. Accidentally copied dual screen. I have been running into countless problems while trying to manipulate this revolved surface like a polygon but there is something stopping me. How do I just select an edge or a face without the entire thing lighting up with yellow dots and not actually selecting anything! I try to hold shift and click other faces but that doesn't work either!
If I could somehow delete the action of revolving a line to treat the independent tessellations as one uniform polygon. I am very new to this program and I don't know where history might be.
I have a model of gums and a set of teeth. What I am trying to do is create an animation where the fourth tooth back on each side of the upper gums disappear then create a blendshape causing the front teeth to move back and fill in the gaps as well as condense the gums so there isn't a gap here either. I am not exactly sure what the best way to do this would be, I am newer to Maya. My question is; Is there and easier way to do this because once I delete the faces and have a divides mesh I go to Mesh->Seperate and select Vertex mode on both and combine the meshes manually by selecting each vertex with the move tool and while holding "V" dragging the vertex over to the adjacent vertex on the opposite mesh. The issue im having is that the width of the mesh starts smaller upfront and progressivly gets bigger as you move to the back of the gums so by deleting a middle section the two meshes dont line up. The back mesh is much wider than the front. I am also worried that when i go to create a Blendshape to transition from the origional mesh to the new shortened one that will pull the teeth back to a perfect smile. I have heard that when creating a BS both meshes need to have the same number of Vertices and after removing a section mine wont. I am also concerned because after the two meshes have been sewn using this process I am left with an ugly point of intersection all the way around my mesh that has proven difficult to blend using the 'Sculpt Geometry Tool' with a falloff/Soft Mod.
Im supposed to connect them like they're displayed in the picture. I did both of them separately but i just did all four to show how i want them. Im supposed to connect those two but when i press enter when im done, it disappears. Then use the insert edge loop tool to make the neck line smaller.
Both Pictures are the same. The second one just has backface cullin under display
I'm following a tutorial in 2012 (Modelling a polygonal mesh) which states 'Select Edit Mesh > Split Polygon Tool'. There is no such tool listed in the Edit Mesh drop down and I can't find it anywhere.
i'm having a lot of troubles with a free rig i downloaded at creativecrash [URL]. I'll keep it short as i have quite a lot of things to explain: I animated my shot, and everything was ok. Now i have to shade/light/render my shot using vray, trying to create brand new vray materials; I started from my robot-character. Here comes the problems: - I can't select the polygon geometry(i asked the rigger, and he said the geometry were imported as references at rigging time). There are no geometry layers in reference or template, then there must be somthing else causing me the problem. I can access to the object via hypershade, i can click on the shape node and i can see the geometry selected, but then, when i try to access faces, i can't select them!in no way. This means i can't create selections for materials, and so i can't shade as i liked. I tried to selecte faces using the select by materials feature in the hypershade (as the character has some pre created basic materials)but again, i'm not free to assign materials where i want, and i just can use the pre-existing face selections and work on those, but it's not enough for me. [URL]
