I am having a problem with extruding faces on polygons and then smoothing them. Maya does not seem to want to keep my faces together, and instead, splits them up.
I extrude without smoothing and it looks fine, but after smoothing, everything splits up.
I am currently using Maya 2012 Student Version and am having trouble when extruding edges. When I click 'extrude' many of my polys disappear. I will attach some screen shots.
View 1 Replies View Related I'm pretty sure that 'Keep faces together' when extruding does not work correctly in 2012. Well not on my mac anyhow. If you wish to replicate my problem here is my workflow-
Create cube poly > make some subdivisions> select some faces> extrude with 'keep faces together" unchecked> Select a face and use move tool, notice that faces will move apart as they should> Now select some more faces> extrude with 'keep faces together' checked this time> select a face and use move tool> notice how face is still separate as it SHOULD NOT be.
I have a bit of a pickle, I am doing some models for Skyrim, I now have the mesh imported, have already done some modifications to it, but fot the parts that are going to beng I need to turn some polygons into faves(three sided) so they would bent better.
View 2 Replies View RelatedI have a simple question about extruding. I want to extrude a simple plane and want to keep the bottom side of this plane open. In short I don't want a thickness effect. Maya keeps closing the bottom side of the plane and build a cube.
How can I do this in Maya,
I'm currently working on a model and there are a few faces that need extruding. Whenever I go to extrude them rather than just adding to the face it simply takes the face moves it back (or forward) and adds sides to it, so rather than being a solid extrude it's a concave area.
Intel Core i7 CPU 960 @ 3.20GHz
Windows 7 Ultimate 64 bit
ATI Radeon 5900 Series
3DS Max 2013
Maya 2013
I'm having trouble with shading objects I imported from SolidWorks using SimLab's plug-in. My problem is two-fold:
First, the polygons appear to have bizarre twists and bends in them, but there are no corresponding edges to create these deformations. Also, Maya thinks all the faces are planar. I tried cleaning up the objects and it yielded no results. These weird twists appear in both the work space and when rendered. I have tried deleting overlapping edges, but it didn't work.
Second, when I try to apply a bump map to my objects, they don't work. I tried using a noise and a fractal bump map and neither appear on the rendered image. However, the Brownian bump map works. I have tried creating other objects in the scene and the noise and fractal bump maps work just fine on those, just not on my imported geometry. I figured out a brute-force method to make the bump maps work - I delete a polygon and use the append tool to create a new polygon - but I have over 110,000 polygons on this thing.
I'm working on an 8-core MacPro running Windows 7 64bit with 32 GB RAM and two GeForce 9500GT video cards.
I am converting over from Softimage (which I love, but is Windows only) to Maya for OSX. Is there an equivalent in Maya to the new thickness tool available in Softimage 2012 SAP? For instance, if one creates a sphere polygonal object in Maya and slices it, is there a way to give the shell a thickness (like creating a bowl) other than just extruding?
View 1 Replies View RelatedI have converted a NURBS object into Polygon Object, however it has still kept the riginal" NURBS object. How do I take the visibility off the NURBS object?
View 1 Replies View Relatedi have a problem converting polygons to subdiv .when i convert i can only see the object like in wire frame and when going back to polygons i get the same issue.i get this error "// Error: line 0: No object matches name: polyToSubdShape4.
View 3 Replies View Relatedi was creating a simple character(blobs withen blobs). It was going pretty good until i camme across an issue that i can't seem to fix. I first had his neck as a nurb but i realized to do what i wanted i would need to deleted a couple faces so simple create a polygon the same size and shape. So i draged the nurb over clicked create polygon and i made it. The issues was that i can not seem to get them the same size i went to the channel box and typed in the same numbers for size. It was similiar but, was off the entire object was too big. I tried extruding it to match the same rough height and i got that nurb was on a scale that was about 1.626 times larger this. I forgot to mention that i am running maya 2014 student edition.
View 2 Replies View RelatedI'm brand new to Maya just started last night. I'm trying to join two edges of two seperate polygons to achieve one nice smooth edge. I select the merge edge tool and select one edge - its all good - then I try to click another and nothing happens; and ofcourse when I hit enter it says select more than one edge .
View 2 Replies View RelatedI have a model rigged with The Setup Machine and The Face Machine and a single material is applied to each of them. Not sure if the above is relevant, but when I tested this in a clean scene with just a sphere, everything was fine.
I then select a few faces and apply a new material to those faces. I smooth the mesh and the UVs are smoothed and the different materials appear where they should be. If I set the divisions on the polySmoothFace node to 2 or more the materials seem randomly placed across the mesh. The Uvs however, are smoothed correctly. So I then have to reassign the materials to the correct faces.
If I do one smooth mesh, then another separate smooth mesh, the materials are placed correctly.
Is this a bug or do you think something is wrong with my setup?
Core i7-2600K
8GB RAM
Win 7 Professional
Maya 2011.5
Any way to fix this (Picture 1) in either at the poly or subd stage. I have experimented with bevel and can reduce it but is there a way to smooth it out completely.
View 1 Replies View RelatedI have been trying to figure out if there is a more efficient way of doing this for some time. It seems so basic but it always comes to play in my smoothing process.
For all you more experienced modelers, what is the best way to have the edges and corners stay at their 90 degree angles when smoothing while not compromising the roundness of the surface with artifacting or pinching in the corners. I find this problem when creating extrudes with sharp corners on curved/ round surfaces then smoothing them.
I am trying to scale faces individually inward. I extruded the faces and went to scale them but they are still scaling together even though my keep faces together option is unchecked. I tried extruding with faces together and then unchecking it but that didn't work. I also tried deleting my preferences folder and that didn't work
View 2 Replies View RelatedI am building some geometry and need to fill in this area, (ie fill hole with polygons then clean up with split polygon tool) but I am new to nurbs and am trying to do this model with nurbs. I usually use hull mode and move the hull down into the piece of geometry, but it won't move correctly that way.
So in the picture below i am trying to fill the red area and have it go into the green surface. The curvature of the green area makes it not line up correctly(ie fitting to the curvature of the green surface) when using the "moving hulls" approach. I was seeing if there was an easy way to go about this.
As the User's Guide says: The Keep Faces Together setting can be turned on and off when using Extrude by ctrl+shift+right-clicking on the object whenever the Show Manipulator Tool is displayed.
How to use it? I tried as it said, however nothing occurred. H
(I tried by these steps: Select the object -> clicking Extrude -> clicking Show Manipulator Tool in Modify/Transformation tools -> ctrl+shift+right-clicking the object -> Extrude)
I've got a good grasp on 3D modeling and I've taken numerous tutorials to get started.I revolved a container profile from an Illustrator path and I've assigned a mia_material. It's basically a cylinder that I need to map a label onto and my problem is two fold...
1. I am unable to select faces (face mode). In my RMB popup menu, I see "Surface Point", not "Faces".
2. So then I just add the label file to the whole thing, choose Create UVs -> Cylindrical mapping and I am unable to edit, re-position and scale the image to the cylindrical faces.
I'm not new to modeling, but new to Maya. I'm trying to extrude a group of faces, but it is making me extrude them at the same angle they are at in the model(local I think). How do I change the axes to extrude the faces straight up instead of at the angle they are at?
I know this is easy in Max, but I can't find it in the Help File of Maya.
This is an emergency nesecito deliver this project on Tuesday, look what happens When I use the merge is desaparesen extruded or portions of the face
View 1 Replies View Relatedin order to get a head start on my next class, I bought the book: Introducing Maya 2011 by Dariush Derakhshani and have been following along with the tutorial projects within.
The issue I am having is probably a silly noob thing, but I can't get the selection handles (for polygon faces) to show up on a simple polygon sphere. I can see the handles on the corners of individual faces, but not the ones that are supposedly in the center of each face.
I have tried going to Display > Transform Display > Selection Handles but nothing happens. I have tried this while selecting the sphere with options under both "Select by Object Type" and "Select by Component Type" with no results.
I am running Maya 2011 on a Macbook Pro on OSX.
I'm used to being able to select and hide polygons while creating models in programs like Lightwave and Modo. It is an essential function that I can't imagine Maya lacks, yet there isn't an obvious way to do this as far as I can tell. Is there a workaround?
View 5 Replies View RelatedWe've had to re-image machines, so it's been a few days of trouble shooting new issues with re-install of Maya2012.
Installed SP2 for Vista yesterday in hopes some of the modeling issues would be fixed. But still having two issues.
The worst is each time I try to cut faces my faces in sections of model disappear. The face is there and it's closed. If I re-launch Maya then the display is correct.
The last but less of a nuisance at this time is a white display during view port changes. Didn't have this issue before. But all of our machines here on the team are doing the same thing.
I am using maya 2011. I have a simple roof, which i extracted faces from the small house (see pic1). However, when i smooth the roof, all the extracted faces went smooth individually (see pic2). How can i combine all those individual faces i extruded, to make into a single mesh or polygon, so that when i press 3, it will smooth like as in pic3 rather than individually.
View 3 Replies View RelatedI would like to edit the faces of a model I imported into Maya, but I cannot find the face option when I right click. When I create a polygon however, it works just fine on it. Is there any way I can convert the model into a polygon?
Fully sized image in attachment.
i'm having a lot of troubles with a free rig i downloaded at creativecrash [URL]. I'll keep it short as i have quite a lot of things to explain: I animated my shot, and everything was ok. Now i have to shade/light/render my shot using vray, trying to create brand new vray materials; I started from my robot-character. Here comes the problems: - I can't select the polygon geometry(i asked the rigger, and he said the geometry were imported as references at rigging time). There are no geometry layers in reference or template, then there must be somthing else causing me the problem. I can access to the object via hypershade, i can click on the shape node and i can see the geometry selected, but then, when i try to access faces, i can't select them!in no way. This means i can't create selections for materials, and so i can't shade as i liked. I tried to selecte faces using the select by materials feature in the hypershade (as the character has some pre created basic materials)but again, i'm not free to assign materials where i want, and i just can use the pre-existing face selections and work on those, but it's not enough for me. [URL]
View 2 Replies View RelatedHow can I hide the measurements displayed on the faces and edges of my mesh here?
View 2 Replies View RelatedI'm trying to extrude multiple faces, and then get them to rotate along the center of the object so that they can all sort of have the same angle radiating from the center. In the picture, the one on the top Left is my starting point. I would like to rotate those faces, for example, so that they will all be flat (picture on Right which I achieved through vert snapping to grid) but the only results I can produce are the 2 small pictures on the bottom. =(
Is this possible?
I'm trying to extrude a flat polygon so that i can break it up into pieces using volumebreaker. When i'm in edit poly and i extrude , this is what happens: url....I want it to be extruded downwards, but leave the selected area on the top.
View 1 Replies View RelatedI made all my polygons with the same technique but somehow interactive polygon split tool does not split all polygons... I attached a file with which I have problem. Split tool just "disappears" after submitting changes...
View 1 Replies View Related