All I can find online is to highlight over an area to select multiple mesh points. That will not work in my case. I can't tell illustrator to select same color, the way it does with fills and strokes? I want to change the color and I have to click on every single point again? Ridiculous.
View 3 RepliesIs there any way to sample all of the color points with the gradient mesh tool all at once rather than using the eyedropper one by one on each point??
View 8 Replies View RelatedI'm trying to practice on myself using the gradient mesh tool… I understand the point made about making many smaller meshes e.g. eyes, nose, mouth…
I open an image of myself >open the layers panel and lock my image…Create a new blank layer…Then I select my pen tool…Start making an outline of my face, approximately 1-3 pixels all the way around the outside…Then I go up to the menu bar and click on, "Object >Create Gradient Mesh" - 15 rows by 15 columns…then I use the selection tool and select the whole mesh that was just created…then set the opacity to 0%…Using the direct selection tool to select & move anchor points and handles as needed to match light lines…then I use the mesh tool to select an anchor point to start coloring this is where I start to run into trouble…
after selecting my first anchor point to color, I select the color picker tool from the toolbox for some reason I'm not able to select that color beneath the mesh (the color underneath the selected anchor point)…
I played around & so far the only way I'm able to select the color beneath is by moving the whole mesh to the side, but… I end up losing the reference point of where that anchor was…
I've just begun learning how to use the gradient mesh and I'm wondering if there is a way to have all the points in the mesh automatically sample the color of whatever they sit over, ie the template? This seems like it would be a very usefull function.
I'm using CS5.
I have a picture in Illustrator CS3 and I'm trying to make a vector for a t-shirt. I want to remove the brown background, but I'm unable to select the background. I select image, live trace etc (6 colors), but stil unable to select only the background, only the whole picture. Not sure what to do here.
View 3 Replies View RelatedWe are having a problem applying a gradient mesh to a shape. If we apply the mesh to a square box the grid appears properly, but if we apply it to a shape the grid is massively distorted with lines going in all directions.
View 3 Replies View RelatedI'm using Vectorscribe trial and think pathscribe is quite useful, but it does not work with gradient mesh. Is there any way to use pathscribe with gradient mesh?
View 3 Replies View RelatedIs there a way to do a gradient mesh in XDP like in Adobe illustrator?
View 9 Replies View RelatedI'm using CS5. I'm looking for a way not to assign any color to a node so I can make gradient mesh with some transparent gradation using '0% opacity' and 'no color(this is the part I'm asking)'. This is needed for overlapping meshes.
View 4 Replies View RelatedI am attempting to use the mesh too but when I click on my object it just turns it black and grayscale. I create a circle with a color gradient then click the mesh tool and when I click my objuect it just turns black and grayscale.
View 5 Replies View RelatedI am trying to sample color of a photo on a lower layer in a gradient mesh layer above. It doesn't work in Illustrator CS6, but it works in CS4.
mac pro 3.2 xeon/6gig/1T/os10.8.4
Trying to work with gradient mesh colouring the nodes and every few nodes I colour the selection stops working and i cant select the mesh. Doesn't matter if which selection tool I use or even the gradient mesh tool its still the same issue. I can see the mesh lines and when i click with any tool on the mesh lines will show up in black but i cant select it to see the nodes. The only way that i've found around this is to save the work, close the file and reopen it. It's starting to be a pain as im having to do this every couple minutes.
I've done all CS6 updates and still getting the same issues so now im stumped.
For a school project I was to render an everyday object and I chose a pepper. I created the pepper with the mesh tool and also rendered it with the gradient mesh, now my instructor says that I need to have really smooth curves but I have way too many anchor points so I don't know how to fix the curves.
View 4 Replies View RelatedI have a gradient mesh and I used a single pantone color to shade it, ie. with different tints of the one colour.
I want to see what it looks like in a different pantone color and wondered if there was a way to swap out the original color for a new one and keep the different percentages at the same time.
So, basically, I am DETERMINED to learn how to use gradient mesh in 5.1. I tried to do that well-known red pepper exercise (I'll provide the URL if somebody hasn't seen it.) Everything was going fine until I actually tried to use the background jpg of the pepper itself in outline mode as a template. The idea is to pick up the template colors of the pepper and then use them as gradient mesh colors. No matter how I tried to do it, that trick just would not work.
If you are working on a gradient mesh and are using image template as a guide you want to work in outline preview so you can see the underlying art to determine wht you are constructing and also it then allows you to use the eyedropper to sample the color of the actual photo so it can be translated tothe mesh and you can simply switch back to Preview mode to check your progress.
Very handy when working with gradient meshes if you are using and underlying template to translate into art.
That sounds great, but sampling the color of the photo and then actually using it on the gradent mesh points just did not seem to work for me.
Can i save a vector with gradient mesh as isolated .PNG? It has some effects, so if I'm taking it out from the blue background it becomes darker. I need it isolated png for using it in an iOS app.
View 2 Replies View RelatedI'm having problems getting what I want on Illustrator CS6. This is the shape that I'm working on: [URL]
I got two paths, one for the inner outline, one for the outer. I want this to be one object, looking just like that, where red is the fill, and black is the outline. Simple as that. [URL] - this is what i want.
So, the inner "circle" is not filled with anything, beacause my object is this "frame" outside. But since I have two seperate paths, I'm filling the outer path with colour, and I get:
[URL] the outer filling is red, the outside is transparent, which is good, but the inside is red because the inner path has no filling.
Right, so next I fill the inner path with white and it looks almost good: [URL]
But the inside is not transparent, it's an "illusion" and everything will be great on a white background, but that's not the case.
I want to convert these to paths into one object to behave exactly like I showed in the first image. Red is the fill, black is the outline. And I plan to use gradient mesh heavily on that shape, so that has to work to.
Bad quality, just doing some quick previews on Photoshop.
I have problem with illustrator CC v17 ..
Please Watch This Video And Check My Problem ! [URL]
I'm trying to create a distressed look on an object that has a gradient mesh appliet to it. i've done this with regular objects but never on one with a gradient mesh. one of the steps in this process is to expand the object, but i'm not able to do so because the expand option is grayed out in the drop down menu.
normally after expanding the object i would use one of the artistic charcoal brushes to create a texture over the object in a different color. then i would select the brush strokes and expand apperance. then, using the pathfinder, i would merge the expanded brush strokes with the expanded object and then delete the brush stokes. what remains is the object with little cut-outs where the texture of the brush strokes used to be.
however i can't do this because i can't expand the object with a gradient mesh.
I just installed softimage 2012 on my pc and I've been having several bug problems. I can't select faces on models. Points, edges, etc. are available but not faces. also, when I change to textured view mode, no textures appear, it always shows as shaded mode. finally, xsi always opens with the layout messed up and on robot mode.
I 'm running it on administrator mode on windows 7 x64 also I tried disabling windows desktop styles etc.
I have an NVIDIA GEFORCE 9600 GS video card
8gb ram
700 gb hd
I have CS5. The bugs and broken features in AICS6, make it unusable in my workflow.
I am specifically concerned about the inability to drag global color swatches from the color panel to Gradient stops in the Gradient Panel. I use this method to update a gradient color because I find it MUCH faster than option-dragging to duplicate a stop color, then deleting the unused stop. Since I do this constantly, I find using CS6 very tedious.
In my illustration I have like 300 objects and 100 of them are gradient objects. The gradient colors all different. How to select all gradient objects in one click? Is there any plug in ore some trick?
View 6 Replies View RelatedThe direct selection and lasso tools keep selecting entire paths. I thought these tools were for selecting individual or small groups of anchor points so that they can be edited. I am using Illustrator CS6, and I'm not sure if I'm doing something wrong or if my program is being buggy.
View 2 Replies View RelatedI am working on a scanned black and white image that I image traced in Illustrator. I am now in the process of seperating certain parts of the image from each other for changing colors. I know how to do this, but my way is by using direct select and going in and picking out points and joining them which is going to take ages. Is there any way to say select a range of anchor points on a path (not the whole path, but not individual points either) like shift clicking a range of files in windows explorer? Are there any other ways I can go about this in a more time efficient manner? I am using the Creative Cloud.
View 1 Replies View RelatedNoramlly in CS5 and any other version of Photoshop or Illustrator that I know of, if you click a point in an object, it will show the handles for transforming the line. As I'm creating something today, it works for a while and then stops. Yesterday I had the same problem. I drew a few things and then suddenly, the Direct Select Tool is not showing any transform handles.
I can get them to show if I can click and drag a box over the point, but this is slow and doesn't work well for layered art. I already tried resetting my illustrator preferences.
Also, in CS5 there's a simple icon that you can click to convert the currently selected point from a curved point to an angled point. Is there not such a thing in CS2?
I was always able to do this before. (should be simple...) I made a gradient and just want to save / add it to a Swatch Panel that I've already defined and saved. I used to be able to drag (I think) the gradient into the desired Swatch Panel and then 'save the swatch again' It won't let me do this today even though I just did it last night!
I'm working on a Windows 7 machine and I am using Illustrator CS5....
I know that to merge different sections they have to be on the same layer / sublayer then you should cut them so they merge or rather it's not closed. That is exactly what I did and the little gap you see in the image, I can't get those two to merge together as one seamless object ?
View 8 Replies View RelatedIllustrator CS4, latest updates.MORE than often, slices on my design can't be selected.I tried everything, from sending all others to the background or deleting them, resaving them, cute-paste, moving them to another layer, hide-show, lock-unlock…
You can see them on wireframe view, but they won't preview, nor are selectable other than drawing a square over them with the slice select tool, but after you have them selected, you can't move them with the pointer, since they get de-selected.
While the are selected with the above technique, just nudge them and move them back to its place. e.g. click the "up" arrow once and them "down" once while the slices are selected and the slice-select tool is active.
how do I create a gradient using my own colors? I've recently upgraded form CS3 where I was able to just drag a colour swatch onto the gradient slider to set the colour. Now I can't do that. If I try with one of the default colors it works no problem but if I create my own swatch then I get a circle with a line through it saying I can't do it.
View 5 Replies View RelatedIs there a way to, as in Photoshop's effects gallery, create a color-overlay on an already-done gradient in Illustrator CS 5.1? I've already done the gradient and I have my color, but can't quite make it work.
View 2 Replies View RelatedImagine a radial gradient that goes from red in the center to transparent. Then cut it in half. Then on the bottom, I need it to go from blue in the center to transparant. Also radial. How do I do this in Illustrator? I want it to look like it's all the same radial gradient... just red on top and blue on the bottom. I've mocked it up in Photoshop below. But I want to know if I can do this in Illustrator.
View 14 Replies View Related