AutoCAD Civil 3D :: Add Labels To Assemblies / Subassemblies?

Dec 15, 2011

I was wondering if there is a way to add labels to assemblies/subassemblies.  When I use generic subassemblies or subassemblies I have created in SAC there aren't labels such as slope or offset/elevation.  At this point I am stuck creating labels in each of my section views and this can become very tedious.

I am using C3D 2011

View 2 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Assemblies Not Registered / How To Get Assemblies To Work

Jul 20, 2012

I'm trying to use assemblies when creating a corridor. The Tool Pallette is emply but I can drag the assembiles in from the Catalog. I've also created an assembly using the ASC. Neither work when I try to use them. The error message is attached.

I'm using a network installation and I do not have the option of changing it to a DVD installation.

View 2 Replies View Related

AutoCAD Civil 3D :: Surface Slope Labels - Rise:Run Custom Labels?

Dec 27, 2013

I am trying to create a surface rise:run slope label for our company template file.  I have it set using the default values that I want.  But right now the text is just 1:1...where we want it to read 1V:1H.

how I can keep the label dynamic to the surface, but put the V & H in the label after the values.?

View 2 Replies View Related

AutoCAD Civil 3D :: Why Does Not Consider Curve Labels As A Part Of Alignment Labels

May 3, 2013

I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ? 

Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc .... 

(aligment by aligment ...... of a whole project ?

Civil 3D (2013)

View 9 Replies View Related

AutoCAD Civil 3D :: How To Specify Code Set To Be Used On Subassemblies

Jul 11, 2013

How do I specify the code set to be used on subassemblies when creating an intersection? I want to specify this in a command setting so that the intersection is built correctly without me having to edit feature lines in the corridor properties for th intersection.

View 9 Replies View Related

AutoCAD Civil 3D :: Subassemblies - Pkt / Dll And Different Computers

May 15, 2013

how subassemblies work, vis a vis pkt files & all the files created in the ProgramData folder (.atc, .cfg, .dll, .emd, .pvd, .xaml, pdb)?  Here's our situation:

A user will make a subassembly, save it locally.  The subassembly is used in a corridor.  A different user tries to access this file: the subassembly is there (shows in plan), but the parameters are empty and that part of the assembly doesn't run.  The subassembly doesn't appear in the Tool Pallet.  You do get a .NET error when trying to look at the subassembly.

How we fix this is to open up the C:ProgramDataAutodeskC3D 2013enuImported Tools folder on the computer which made the subassembly, copy everything, and paste it into the other computer's C:ProgramDataAutodeskC3D 2013enuImported Tools folder.  How/why doesn't the drawing which has the subassembly in it just work??  And moving forward, how can we share drawings with custom subassemblies?  Remap everyone's .net search path to a network drive?

View 4 Replies View Related

AutoCAD Civil 3D :: Have Subassemblies On Ribbon Interface?

Jun 11, 2013

I think tool palette with vertical tabs are a lot of unconfortable... 

Is there any way to have or to create a "mega-subassemblies-ribbon" ?

View 3 Replies View Related

AutoCAD Civil 3D :: Aligning Different Subassemblies At Intersection?

Jul 23, 2013

issue with my Corridor.  It involves the intersection of a main road alignment and a secondary road. Thing is my main road has a 6' shoulder whereas my secondary road doesn't have a shoulder at all. I used the Intersection Wizard to create the Intersection, but the two templates don't align. Without the shoulder the ditches don't line up. I tried drawing a polyline between the two ditches and targeting it and that worked, but then realized that going from 6' shoulder to no shoulder wasn't working either so when I tried to target a polyline from the 6' shoulder to the edge of pavement all kind of stuff happened that didn't make sense to me.

Windows 7 Prof w/ SP1, 64bit, Xeon 3Ghz, 16GB
Civil 3D 2013

View 9 Replies View Related

AutoCAD Civil 3D :: Subassemblies At Different Slopes Targeting Each Other

Nov 15, 2013

I have a ditch and a road that need to follow separate profiles but be integrated with each other as a single corridor and the ditch's 3:1 slope needs to meet up with the road's 2% slope.  Is it possible to have the two subassemblies target each other without having to create a dummy surface or a feature line for targeting to?

View 6 Replies View Related

AutoCAD Civil 3D :: Importing Subassemblies From SAC Causes Crash

Mar 11, 2013

When I attempt to import a PKT file from SAC, C3D crashes. This includes custom ones that I created as well as samples from the ADESK site.

View 9 Replies View Related

AutoCAD Civil 3D :: Export Subassemblies Into Subassembly Composer?

Mar 11, 2013

I understand the procedure for IMPORTING a pkt file from SAC into C3D.  But is there a way to go the other direction?I want to use certain SAs that come with OOB C3D -- but I want to customize them.

Of course I can recreate them -- but I'd rather not start from scratch (ESPECIALLY where it comes to the codes).

View 3 Replies View Related

AutoCAD Civil 3D :: Lines At Connection Points Of Subassemblies

Sep 4, 2012

I'm doing sections for a new sidewalk, but they have vertical lines at the connection points (see attached).  How to turn them off? 

View 3 Replies View Related

AutoCAD Civil 3D :: Using Customized Subassemblies And Parts Builder?

Aug 14, 2012

We are just starting with Civil 3D 2012.  We are doing a pilot project, and the engineer wanted to make a custom curb subassembly matching the exact dimensions (angle from bottom of curb to top of curb) as the county detail.  I didn't think that was necessary and thought we could use one of the generic subassemblies.  usually use the basic or generic subassemblies or do you create your own to match specific municipalities' details exactly?

Do you find that the parts that come with Civil 3D are usually sufficient for design or do you make a lot of custom parts?

View 6 Replies View Related

AutoCAD Civil 3D :: Comparison Point On Conditional Subassemblies

Jul 9, 2013

I need to create a corridor that has this section. So I'm using this assembly:  

on which I put 3 conditional fill subassemblies on point A, one for fill conditions of more than 2 m that would daylight at 2:1 until it reaches 2 m down and then daylights at 1:3 until it reaches the EG. Then I have another for fill conditions of less than 2 m that only daylights at 2:1 to the EG, and the last one is for all cut conditions.

As expected I have the following problem in some stations that have fill conditions on A of less than 2 m but more than 2 m on B:

Is there any way I can make B the comparison point without having the following problem on cut conditions?

Or that I could create an assembly with the condition that when I have a fill of more than 2 m on point B it daylights, from point B, at 1:3; but when B would be on cut conditions it daylights from A?

View 7 Replies View Related

AutoCAD Civil 3D :: Creating Corridors With Multiple Materials In Different Subassemblies

Apr 3, 2013

I am trying to set up a corridor with multiple materials with multiple pavement sections.  For example, I have concrete and asphalt surface pavement, about 4 different kinds of base material and 2 different sub base materials to use.  It doesn't seem like you can get quantities divided up like that.  It seems like you can only get the 'base' material counted up with the quantities and you can only assign one material to it.  Is the answer to create multiple corridors for each pavement type that has their own Code Set to assign to each corridor? 

View 9 Replies View Related

AutoCAD Civil 3D :: How To Provide Multiple Daylight Subassemblies With One Assembly

Jul 24, 2013

Have a question regarding multiple daylight subassemblies, don't know if it is possible.  So I have an assembly with a trench SA in cut condition and a project to surface in fill condition, I built the corridor with this assembly and most of things look fine.  However, there is a short stretch (in cut condition) of the corridor that I would like to modify such that a trench is not provided.  I know I can create a new assembly with my desire condition, then create a new region and drop that assembly there, but I am wondering if there any other way to achieve my goal without another assembly.

View 8 Replies View Related

AutoCAD Civil 3D :: Turn Off Different Levels Of Shading In Subassemblies That Show Up

Dec 18, 2012

is there a way to turn off different levels of shading in the subassemblies that show up? when i orbit my road, i cant clearly see what is going on, and would like to turn off some shading. see image, i want to turn off where the arrows are pointing.

View 2 Replies View Related

AutoCAD Civil 3D :: Modify Assembly - Some Of Existing Subassemblies Move

Oct 24, 2012

I've got several assemblys built for a road project. the problem is whenever i modify an assembly by adding a subassemby, some of the existing subassemblies move. they stay attached to the assembly but they disconnect from the part they were attached to. i can move them back so the assembly looks correct but when i rebuild the corridor chances are they show up wrong. i've tried 'move to' and just grabbing and snapping. i can eventually get it attached but not without trial and error. i'm running c3d2012.

Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0

View 4 Replies View Related

AutoCAD Civil 3D :: Transition Between Subassemblies - Show Up In Cross Sections

Jun 25, 2012

Along my corridor I have different assemblies I used.  My sidewalk is curb side in some locations and in different locations there is a boulevard between the curb and sidewalk. I want to transition between these different  assemblies and I want that transition to show up in the cross sections I cut. Isn't there a way to tell Civil 3D to transition from one assembly to the next one as you could in Eagle Point?

View 9 Replies View Related

AutoCAD Civil 3D :: Edit Subassemblies In Corridor Modeling Catalog

Apr 2, 2013

I am using C3D 2013.

Is it possible to edit a sub-assembly in the Corridor Modeling Catalog (Imperial.NET) see attached image.

The company I work for has several users working off one network server. I would like to make a revision to one of the dimensions in the sub-assembly "UrbanCurbGutterGeneral" (the default gutter width is 16" I would like to make the default 18"). I'm assuming I need to change this in the Catalog so every users tool palette will be updated also.

View 2 Replies View Related

AutoCAD Civil 3D :: Subassemblies Not Displaying Correctly In Section Views?

Apr 18, 2012

I am running a corridor in Civil 3D 2012 that has two baselines.  Issues with multiple baselines in section views, but understand this problem was eliminated in 2012? In any case, this does not seem to by my issue.  Attached you will find a section view through the two baselines (one is for a general overlay, the second for widening).  The section view seems to display correctly at station 3+75, but 25' feet further down the road it does not display the corridor assemblies correctly (as can be seen by the lack of a ditch and shoulder overlay in the second image).

I have checked the code styles to make sure all links are included, as well as the comparing section view properties.  All settings and styles appear to be the same, and the corridor seems to be built correctly.  If I sample the Finished Grade corridor surface, it displays in section view as if the ditch were there (see third image).

Civil 3D 2010 & 2012
HP Z400 Workstation
Intel(R) Xeon(R) CPU W3550 @ 3.07 GHz
6GB of RAM
64-bit OS
NVIDIA Quadro 2000 running driver version 8.17.12.7105
Win 7 Professional

View 2 Replies View Related

AutoCAD Civil 3D :: Create Assembly Consisting Of Two Curbs Subassemblies

Jun 7, 2012

I'm trying to create an assembly that consists of two curbs sub-assemblies that are tied to independent alignments with a pavement section in between them.  I have been successful in actually creating an assembly with the two curb sections, but I cannot figure out how to define a line or pavement section that will connect one gutter to the other.

I have one curb tied to the main baseline and the other tied to an offset.  I have assigned horizontal alignments and profiles to the baseline and the offset.  The curbs actually place where I want them when viewed with the section editor.  I had thought that I could use the LinkToMarkedPoint subassembly and simply attach it to the gutter of one curb and to a marked point on the gutter of the other curb, but I can't get it to actually work.

Again, the curb alignment and profiles are completely in independent one another, and I need a way to define a pavement section (or just a surface) between the two gutters.

View 2 Replies View Related

AutoCAD Civil 3D :: Creating Surface Boundary When Using OverlayWidenMatchSlope Subassemblies

Jul 12, 2012

I'm creating a corridor to widen a road on the left and right sides.  I am using OverlayWidenMatchSlope, with various other subassemblies.  In places it daylights, in places there's a cut wall modeled from generic links.  I am trying to create a good boundary for the corridor surfaces but I'm puzzled by one thing.  The OWMS subassembly has a P2 code, but the corridor will not generate a featureline connecting the P2 codes.. 

I will try adding another baseline, and a new subassembly that will just use a generic link to target the sawcut line (the insert point for OWMS).  That should give me a featureline I can use for a surface boundary.  Is there a way to generate that featureline from the inside edge (the insert point) of the OWMS subassembly?

Win 7 64-bit, Intel i7 920,12 GB
Win 7E 64-bit, Intel i7, 12 GB
C3D 2012

View 2 Replies View Related

AutoCAD Civil 3D :: Section Views - Some Subassemblies Only Showing On Certain Stations

Oct 20, 2011

I am having an issue with my section views. Some of my subassemblies are only showing on certain stations. If I view the stations on the cross section editor, the corridor looks just fine, but when I go to the section sheet where the corridor is x-referenced, the driveway disappears.

I have rebuilt the corridor numerous times, detached and reattached the drawing, made a new drawing and recreated the sample lines to no avail. Attached are some pictures to show the disappearing driveway on the right side of the street.

View 8 Replies View Related

AutoCAD Civil 3D :: Remotely Manage Subassemblies That Appear In User Tool Palette?

Mar 26, 2012

If I build a subassembly in subassembly composer is it possible to deploy it in my company without having each user import it?

View 1 Replies View Related

AutoCAD Inventor :: Promoting Parts In Assemblies From Stock Sub-assemblies Or Component Groups

Oct 3, 2011

I am working in an Inventor Assembly .iam, I have about 250 fasteners (screws) that are constrained to a flat washer and lock washer. I would like to put them in as a single unit (sub assembly if you will) and then promote or explode them in the top level so that my bom has 250 screws, 250 washers, and 250 lock washers all at the same level, not associated to one another except thru the constraints that were entered in the original assembly. I have tried Promote but that doesn't work because it removes the washers from the original file and I end up with only 1 instance of the assembly. Am I approaching this incorrectly? Is there a better way? I run across this scenario with different components quite often.

View 2 Replies View Related

AutoCAD Inventor :: Busting Up Sub Assemblies In Upper Level Assemblies?

Mar 8, 2012

If you have created a sub assembly and inserted it into an upper level assemby, is there a way to bust up the sub assembly at that level?

The issue arising is the individual components need to be called out on the upper level, but in the drawing are all showing up as the same balloon.

View 4 Replies View Related

AutoCAD Civil 3D :: Transition Between Assemblies

Nov 15, 2012

I've attached a screenshot of some "webbing" I have going on between regions in my corridor.  As you can see on the left, there's the start of a left turn pocket lane, which is why I have two different assemblies.  This is just one instance, but this is happening along my entire corridor.  I've given up on trying to resolve and have made gaps in my corridor.  But me being an engineer, gaps bother me and would rather figure out a solution.  I'm wondering if it has anything to do with point codes?

View 4 Replies View Related

AutoCAD Civil 3D :: Assemblies And Corridors

Dec 28, 2012

I have a proposed road with a varying curb line.  There is a minimum 5 foot tree lawn between the back of curb and sidewalk.  I have used a lane transition and attached it to an alignment to get the curb to follow.  Also used the urban sidewalk with buffer widths. 

How do I connect the back of curb to the sidewalk and keep the sidewalk in the same offset from the baseline.  In the attachment, I have used a zero inside boulevard width and slide the sidewalk over from the curb line in my assembly.  Will this work?

View 2 Replies View Related

AutoCAD Civil 3D :: Sub Assemblies Not Displaying

Aug 2, 2013

I have Civil 3d UKIE. Since the installation of service pack 2 the British std kerb appears on the screen as 2circles approximately 2 meters apart.

View 1 Replies View Related

AutoCAD Civil 3D :: How To Connect Assemblies

May 3, 2013

I'm trying to construct a complex corridor of urban highway. To simplify corridor i've made assemblies for each side of the road (see picture). This solves problem of countless number of regions (and assemblies) that I'll need to set if assemblies are for whole profile.

The problem with seperate assemblies for each side of the road is that I cannot connect them using Median subassembly because Marked point and Median are in different assemblies. 

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved