AutoCAD Civil 3D :: Lines At Connection Points Of Subassemblies
Sep 4, 2012I'm doing sections for a new sidewalk, but they have vertical lines at the connection points (see attached). How to turn them off?
View 3 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Draw 2D Lines From Points
Feb 28, 2013How do I draw 2D lines from points? What setting do I need to change? I want to drawin glines using the node as a grip but I do not want them to have z coordinates.
View 5 Replies View RelatedAutoCAD Civil 3D :: Linking Feature Lines To Points?
Apr 16, 2012Is there a way to link feature lines to points? If I have a series of points and I've joined them with a feature line; I want the feature line to update automatically if I adjust a point elevation.
View 4 Replies View RelatedAutoCAD Civil 3D :: Using 4 Points To Create 4 Lines And 1 Parcel
Sep 18, 2013I have 4 points (from "Points from file", I created Points #1, #2, #3 and #$ in the non-linear fashion).
1) I want to create 4 straight lines (connecting Pt#1-Pt#2, P#2-P#3, P#3-Pt#4, P#4-P#1) by using some Commands. What Commands in the Command Line should I use to create these 4 straight lines from these 4 points?
2) I want to create 1 parcel (connecting Pt#1-Pt#2-Pt#3-Pt#4-Pt#1) by using some Commands after "Parcel Creation Tools" => Draw Tangent-Tangent with No Curve is clicked. What Commands should I use in the Command Line to specify these points to form a parcel?
AutoCAD Civil 3D :: Dimension Lines By Picking Points?
Sep 18, 2012Making the switch to Civil 3D. I was previously using 2009, and I could add dimension labels by picking two points (endpoints, intersections, etc.) to get the whole line or just a segment. In Civil 3D 2012, I create styles and add labels through the annotate tab, but I can only selct the line or curve in its entirety. There must be a way to easily label portions of a line or multiple segments as one line.
View 4 Replies View RelatedAutoCAD Civil 3D :: Drawing Lines To Cogo Points Hangs Up
Feb 23, 2012When I start to draw my polylines to cogo points I have inserted in my drawing it keeps wanting to hang up when I hover over the point. I have set up my point styles to bring in our points with all the attribute information so I am thinking it keeps trying to read all that info as soon as my mouse hits it..
I saw a post about rollovertips but that did not change anything. Any ides what might be causing this? Im using Civil3D 2011.
AutoCAD Civil 3D :: Create Points At Surface Vertices Along Sample Lines
Jan 9, 2013I need to create points with surface elevations along sample lines. The points need to represent the verticies one would see in the section editor. I've attached an image of my section editor for one of my sample lines. I need to create points that represent these 24 verticies along this sample line and do so for the rest of my sample lines as well. Is there an automated process to create these points?
View 1 Replies View RelatedAutoCAD Civil 3D :: Interpolating Points From A Surface Based On The Sample Lines
Jul 21, 2013I wanna interpolate points from surface but only in that area where my sample lines intersecting with the surface. There is a point creation tool that makes this based on polylines but I have to many data and it will get to much time to do this. So, for better understanding I attached some pictures, in the first picture it is shown the final result which I have made based on polylines, but here is also a problem, the tool is not putting points where the surface is changing ( on my second picture I highlighted with red circles).
View 5 Replies View RelatedAutoCAD Inventor :: Sketch Symbol Connection Points?
Oct 7, 2011I am trying to get Sketched Symbols with leaders to align.
I have a sketched symbol defined that has connection points defined at the outer quadrants. If the symbol doesn't have a leader they snap together at the connection points without any problems.
If the symbols have a leader they either won't snap, or jump to a random location depending on what grip you select to move.
The following video image shows the problems with the symbols with leaders.
AutoCAD Inventor :: Adding Connection Points To Pipe Fittings In Content Center
Jan 2, 2012I am trying to add some connection points to flanges that we have ion our Content Center. I am having difficulty. I can get it done if I re-author the flange from scratch, but not if I attempt to modify an existing part.
My workflow:
Get a custom fitting to my localEdit itRun the Tube and Pipe Autor toolAdd my additional connectionSaveFrom the content center editor run Replace Family Template on the original family
This doesn't seem to work.
AutoCAD Civil 3D :: How To Specify Code Set To Be Used On Subassemblies
Jul 11, 2013How do I specify the code set to be used on subassemblies when creating an intersection? I want to specify this in a command setting so that the intersection is built correctly without me having to edit feature lines in the corridor properties for th intersection.
View 9 Replies View RelatedAutoCAD Civil 3D :: Subassemblies - Pkt / Dll And Different Computers
May 15, 2013how subassemblies work, vis a vis pkt files & all the files created in the ProgramData folder (.atc, .cfg, .dll, .emd, .pvd, .xaml, pdb)? Here's our situation:
A user will make a subassembly, save it locally. The subassembly is used in a corridor. A different user tries to access this file: the subassembly is there (shows in plan), but the parameters are empty and that part of the assembly doesn't run. The subassembly doesn't appear in the Tool Pallet. You do get a .NET error when trying to look at the subassembly.
How we fix this is to open up the C:ProgramDataAutodeskC3D 2013enuImported Tools folder on the computer which made the subassembly, copy everything, and paste it into the other computer's C:ProgramDataAutodeskC3D 2013enuImported Tools folder. How/why doesn't the drawing which has the subassembly in it just work?? And moving forward, how can we share drawings with custom subassemblies? Remap everyone's .net search path to a network drive?
AutoCAD Civil 3D :: Have Subassemblies On Ribbon Interface?
Jun 11, 2013I think tool palette with vertical tabs are a lot of unconfortable...
Is there any way to have or to create a "mega-subassemblies-ribbon" ?
AutoCAD Civil 3D :: Aligning Different Subassemblies At Intersection?
Jul 23, 2013issue with my Corridor. It involves the intersection of a main road alignment and a secondary road. Thing is my main road has a 6' shoulder whereas my secondary road doesn't have a shoulder at all. I used the Intersection Wizard to create the Intersection, but the two templates don't align. Without the shoulder the ditches don't line up. I tried drawing a polyline between the two ditches and targeting it and that worked, but then realized that going from 6' shoulder to no shoulder wasn't working either so when I tried to target a polyline from the 6' shoulder to the edge of pavement all kind of stuff happened that didn't make sense to me.
Windows 7 Prof w/ SP1, 64bit, Xeon 3Ghz, 16GB
Civil 3D 2013
AutoCAD Civil 3D :: Subassemblies At Different Slopes Targeting Each Other
Nov 15, 2013I have a ditch and a road that need to follow separate profiles but be integrated with each other as a single corridor and the ditch's 3:1 slope needs to meet up with the road's 2% slope. Is it possible to have the two subassemblies target each other without having to create a dummy surface or a feature line for targeting to?
View 6 Replies View RelatedAutoCAD Civil 3D :: Add Labels To Assemblies / Subassemblies?
Dec 15, 2011I was wondering if there is a way to add labels to assemblies/subassemblies. When I use generic subassemblies or subassemblies I have created in SAC there aren't labels such as slope or offset/elevation. At this point I am stuck creating labels in each of my section views and this can become very tedious.
I am using C3D 2011
AutoCAD Civil 3D :: Importing Subassemblies From SAC Causes Crash
Mar 11, 2013When I attempt to import a PKT file from SAC, C3D crashes. This includes custom ones that I created as well as samples from the ADESK site.
View 9 Replies View RelatedAutoCAD Civil 3D :: Export Subassemblies Into Subassembly Composer?
Mar 11, 2013I understand the procedure for IMPORTING a pkt file from SAC into C3D. But is there a way to go the other direction?I want to use certain SAs that come with OOB C3D -- but I want to customize them.
Of course I can recreate them -- but I'd rather not start from scratch (ESPECIALLY where it comes to the codes).
AutoCAD Civil 3D :: Using Customized Subassemblies And Parts Builder?
Aug 14, 2012We are just starting with Civil 3D 2012. We are doing a pilot project, and the engineer wanted to make a custom curb subassembly matching the exact dimensions (angle from bottom of curb to top of curb) as the county detail. I didn't think that was necessary and thought we could use one of the generic subassemblies. usually use the basic or generic subassemblies or do you create your own to match specific municipalities' details exactly?
Do you find that the parts that come with Civil 3D are usually sufficient for design or do you make a lot of custom parts?
AutoCAD Civil 3D :: Comparison Point On Conditional Subassemblies
Jul 9, 2013I need to create a corridor that has this section. So I'm using this assembly:
on which I put 3 conditional fill subassemblies on point A, one for fill conditions of more than 2 m that would daylight at 2:1 until it reaches 2 m down and then daylights at 1:3 until it reaches the EG. Then I have another for fill conditions of less than 2 m that only daylights at 2:1 to the EG, and the last one is for all cut conditions.
As expected I have the following problem in some stations that have fill conditions on A of less than 2 m but more than 2 m on B:
Is there any way I can make B the comparison point without having the following problem on cut conditions?
Or that I could create an assembly with the condition that when I have a fill of more than 2 m on point B it daylights, from point B, at 1:3; but when B would be on cut conditions it daylights from A?
AutoCAD Civil 3D :: Creating Corridors With Multiple Materials In Different Subassemblies
Apr 3, 2013I am trying to set up a corridor with multiple materials with multiple pavement sections. For example, I have concrete and asphalt surface pavement, about 4 different kinds of base material and 2 different sub base materials to use. It doesn't seem like you can get quantities divided up like that. It seems like you can only get the 'base' material counted up with the quantities and you can only assign one material to it. Is the answer to create multiple corridors for each pavement type that has their own Code Set to assign to each corridor?
View 9 Replies View RelatedAutoCAD Civil 3D :: How To Provide Multiple Daylight Subassemblies With One Assembly
Jul 24, 2013Have a question regarding multiple daylight subassemblies, don't know if it is possible. So I have an assembly with a trench SA in cut condition and a project to surface in fill condition, I built the corridor with this assembly and most of things look fine. However, there is a short stretch (in cut condition) of the corridor that I would like to modify such that a trench is not provided. I know I can create a new assembly with my desire condition, then create a new region and drop that assembly there, but I am wondering if there any other way to achieve my goal without another assembly.
View 8 Replies View RelatedAutoCAD Civil 3D :: Turn Off Different Levels Of Shading In Subassemblies That Show Up
Dec 18, 2012is there a way to turn off different levels of shading in the subassemblies that show up? when i orbit my road, i cant clearly see what is going on, and would like to turn off some shading. see image, i want to turn off where the arrows are pointing.
View 2 Replies View RelatedAutoCAD Civil 3D :: Modify Assembly - Some Of Existing Subassemblies Move
Oct 24, 2012I've got several assemblys built for a road project. the problem is whenever i modify an assembly by adding a subassemby, some of the existing subassemblies move. they stay attached to the assembly but they disconnect from the part they were attached to. i can move them back so the assembly looks correct but when i rebuild the corridor chances are they show up wrong. i've tried 'move to' and just grabbing and snapping. i can eventually get it attached but not without trial and error. i'm running c3d2012.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
AutoCAD Civil 3D :: Transition Between Subassemblies - Show Up In Cross Sections
Jun 25, 2012Along my corridor I have different assemblies I used. My sidewalk is curb side in some locations and in different locations there is a boulevard between the curb and sidewalk. I want to transition between these different assemblies and I want that transition to show up in the cross sections I cut. Isn't there a way to tell Civil 3D to transition from one assembly to the next one as you could in Eagle Point?
View 9 Replies View RelatedAutoCAD Civil 3D :: Edit Subassemblies In Corridor Modeling Catalog
Apr 2, 2013I am using C3D 2013.
Is it possible to edit a sub-assembly in the Corridor Modeling Catalog (Imperial.NET) see attached image.
The company I work for has several users working off one network server. I would like to make a revision to one of the dimensions in the sub-assembly "UrbanCurbGutterGeneral" (the default gutter width is 16" I would like to make the default 18"). I'm assuming I need to change this in the Catalog so every users tool palette will be updated also.
AutoCAD Civil 3D :: Subassemblies Not Displaying Correctly In Section Views?
Apr 18, 2012I am running a corridor in Civil 3D 2012 that has two baselines. Issues with multiple baselines in section views, but understand this problem was eliminated in 2012? In any case, this does not seem to by my issue. Attached you will find a section view through the two baselines (one is for a general overlay, the second for widening). The section view seems to display correctly at station 3+75, but 25' feet further down the road it does not display the corridor assemblies correctly (as can be seen by the lack of a ditch and shoulder overlay in the second image).
I have checked the code styles to make sure all links are included, as well as the comparing section view properties. All settings and styles appear to be the same, and the corridor seems to be built correctly. If I sample the Finished Grade corridor surface, it displays in section view as if the ditch were there (see third image).
Civil 3D 2010 & 2012
HP Z400 Workstation
Intel(R) Xeon(R) CPU W3550 @ 3.07 GHz
6GB of RAM
64-bit OS
NVIDIA Quadro 2000 running driver version 8.17.12.7105
Win 7 Professional
AutoCAD Civil 3D :: Create Assembly Consisting Of Two Curbs Subassemblies
Jun 7, 2012I'm trying to create an assembly that consists of two curbs sub-assemblies that are tied to independent alignments with a pavement section in between them. I have been successful in actually creating an assembly with the two curb sections, but I cannot figure out how to define a line or pavement section that will connect one gutter to the other.
I have one curb tied to the main baseline and the other tied to an offset. I have assigned horizontal alignments and profiles to the baseline and the offset. The curbs actually place where I want them when viewed with the section editor. I had thought that I could use the LinkToMarkedPoint subassembly and simply attach it to the gutter of one curb and to a marked point on the gutter of the other curb, but I can't get it to actually work.
Again, the curb alignment and profiles are completely in independent one another, and I need a way to define a pavement section (or just a surface) between the two gutters.
AutoCAD Civil 3D :: Creating Surface Boundary When Using OverlayWidenMatchSlope Subassemblies
Jul 12, 2012I'm creating a corridor to widen a road on the left and right sides. I am using OverlayWidenMatchSlope, with various other subassemblies. In places it daylights, in places there's a cut wall modeled from generic links. I am trying to create a good boundary for the corridor surfaces but I'm puzzled by one thing. The OWMS subassembly has a P2 code, but the corridor will not generate a featureline connecting the P2 codes..
I will try adding another baseline, and a new subassembly that will just use a generic link to target the sawcut line (the insert point for OWMS). That should give me a featureline I can use for a surface boundary. Is there a way to generate that featureline from the inside edge (the insert point) of the OWMS subassembly?
Win 7 64-bit, Intel i7 920,12 GB
Win 7E 64-bit, Intel i7, 12 GB
C3D 2012
AutoCAD Civil 3D :: Section Views - Some Subassemblies Only Showing On Certain Stations
Oct 20, 2011I am having an issue with my section views. Some of my subassemblies are only showing on certain stations. If I view the stations on the cross section editor, the corridor looks just fine, but when I go to the section sheet where the corridor is x-referenced, the driveway disappears.
I have rebuilt the corridor numerous times, detached and reattached the drawing, made a new drawing and recreated the sample lines to no avail. Attached are some pictures to show the disappearing driveway on the right side of the street.
AutoCAD Visual LISP / AutoLISP :: Construct Lines Between Lines Ending Points Multi Selection?
Aug 3, 2013I want to construct lines between every two line ending point by multi selectio window instead of drawing it manually between lines ending point ?
View 3 Replies View Related