AutoCAD Civil 3D :: Transition Between Assemblies
Nov 15, 2012
I've attached a screenshot of some "webbing" I have going on between regions in my corridor. As you can see on the left, there's the start of a left turn pocket lane, which is why I have two different assemblies. This is just one instance, but this is happening along my entire corridor. I've given up on trying to resolve and have made gaps in my corridor. But me being an engineer, gaps bother me and would rather figure out a solution. I'm wondering if it has anything to do with point codes?
View 4 Replies
ADVERTISEMENT
Jul 20, 2012
I'm trying to use assemblies when creating a corridor. The Tool Pallette is emply but I can drag the assembiles in from the Catalog. I've also created an assembly using the ASC. Neither work when I try to use them. The error message is attached.
I'm using a network installation and I do not have the option of changing it to a DVD installation.
View 2 Replies
View Related
Mar 4, 2013
I have a building pad where I created a grading of 5:1 to existing grade. I want to change one side to 20:1. How do I go about transitioning the 5:1 to the 20:1. I create the 20:1 and the contours just dead end into the 5:1 grading area
View 1 Replies
View Related
Aug 28, 2012
I need to transition to one subassebly to another. The first subassembly is at existing ground the other assembly is above ground. See following picture:
I need to transition from station 12+50 to 13+50. See following picture:
Here is a picture of the Corridor Properties:
Do I need to make a different subassembly in between the two stations? Is there a command I am not seeing that does it for me?
View 9 Replies
View Related
Feb 27, 2013
refer to some bolgs about that how we do this type of transition or accelarationlan lane / deccelaration lane?
View 1 Replies
View Related
Sep 24, 2012
I'm designing a single 2% cross flow blke path. I wanted to reverse the cross flow so I created two corridors, one flowing to the left and one flowing to the right along the same tangent centerline. I want to add a 50 foot warp transition in between them. I'n not sure how to do that. I thought of the intersection design but that won't work.
View 9 Replies
View Related
Oct 3, 2011
I am working in an Inventor Assembly .iam, I have about 250 fasteners (screws) that are constrained to a flat washer and lock washer. I would like to put them in as a single unit (sub assembly if you will) and then promote or explode them in the top level so that my bom has 250 screws, 250 washers, and 250 lock washers all at the same level, not associated to one another except thru the constraints that were entered in the original assembly. I have tried Promote but that doesn't work because it removes the washers from the original file and I end up with only 1 instance of the assembly. Am I approaching this incorrectly? Is there a better way? I run across this scenario with different components quite often.
View 2 Replies
View Related
Mar 8, 2012
If you have created a sub assembly and inserted it into an upper level assemby, is there a way to bust up the sub assembly at that level?
The issue arising is the individual components need to be called out on the upper level, but in the drawing are all showing up as the same balloon.
View 4 Replies
View Related
May 16, 2012
See drawing attached.
I have a large fill area directly dropping to to a large cut area. All of the above work is in rock, There is a retaining wall along a section of the "cliff face" but not at the ends where the cut and fill meet.
I would like to transition the fill batter on to the cut batter to enable the filled area above to be self supporting.
View 1 Replies
View Related
Sep 12, 2013
I am working on a project where some of the corridors require different daylight slopes. I need to transition between a region with 2:1 slope to a 10:1 slope. My local civ3d support said something about using grading tools to achive that.
What I understood was that my assemblies should not have any daylight sub-assembly and that i should grade the corridor and than add a transition zone between the different gradings. Did I understand correctly?
View 9 Replies
View Related
Nov 30, 2012
I'm looking for a way to determine (and preferably edit) the values of P1 and P2, the offsets of the initial tangents into the PC/PT of the shifted curve. It's not in the (admiteddly basic) book I have either.
[Edit: OK, after double-checking,I just found Widening offset clothoid, but I'm still none the wiser.]
View 1 Replies
View Related
May 6, 2010
With Civil 2010 I used superelevataion to transition a street's cross fall from left to right. It was very straight forward with 2010.
Now with 2011 it appears that I cannot add superelevation to an alignment with any curve and change the crossfall of a street from left to right over 20m.
View 3 Replies
View Related
Jul 29, 2012
I want to add a single transition curve between two reverse curve in Civil3D.
I am using Civil3d2012.
View 3 Replies
View Related
Dec 28, 2012
I have a proposed road with a varying curb line. There is a minimum 5 foot tree lawn between the back of curb and sidewalk. I have used a lane transition and attached it to an alignment to get the curb to follow. Also used the urban sidewalk with buffer widths.
How do I connect the back of curb to the sidewalk and keep the sidewalk in the same offset from the baseline. In the attachment, I have used a zero inside boulevard width and slide the sidewalk over from the curb line in my assembly. Will this work?
View 2 Replies
View Related
Aug 2, 2013
I have Civil 3d UKIE. Since the installation of service pack 2 the British std kerb appears on the screen as 2circles approximately 2 meters apart.
View 1 Replies
View Related
May 3, 2013
I'm trying to construct a complex corridor of urban highway. To simplify corridor i've made assemblies for each side of the road (see picture). This solves problem of countless number of regions (and assemblies) that I'll need to set if assemblies are for whole profile.
The problem with seperate assemblies for each side of the road is that I cannot connect them using Median subassembly because Marked point and Median are in different assemblies.
View 3 Replies
View Related
Mar 8, 2013
It sounds like the transition should happen automatically (although some tweaking may be required).
But for some reason, I'm NOT getting a transition.
I had one assembly for the entire length and the designer wanted to have the curb stop at 0+40 and from 0+40 to the end, he wanted NO CURB--just an EOP.
So I copied the assembly, modified the copy so that there was no longer a curb and attached the shoulder (that was previously connected to the curb) to the EOP.
So the codes should all be same. I just attached a dwg file (created/saved in 2012) with my two assemblies in it.
Here's a screen shot of what I'm getting:
View 9 Replies
View Related
Oct 13, 2013
When I click on Tool Pallets, I get the Metric Subassemblies Pallet, even though my drawing units are in feet and the Properties Pallet that comes up is in feet. How do I bring up the Imperial Subassemblies Pallet?
HP DV7 Laptop
Intel Core i7-3820QM 3rd Generation Quad Core 2.7 GHZ CPU
16 GB DDR3 RAM ( 2 DIMM ) / 180 GB SSD
Nvidia GeForce 650M Graphics w/2 GB Memory
Windows 7 Professional 64 bit / AutoCAD Civil 3D 2014
View 5 Replies
View Related
Aug 17, 2010
How I can put the above mentioned Sub-Assemblies in a CUT condition? They all default to a Fill condition (Attachment Point at Top of Wall). I need it to have the attachment point at the Bottom of wall. I cannot seem to find where to do this?
View 5 Replies
View Related
Dec 19, 2012
I have two assemblies that represent road cross section at two points along a corridor. I want the corridor to transition smoothly between the two cross section so that if I look at a section halfway between the two assemblies it will have an intermediate width. Doing this with a simple transition assembly doesn't seem to be the most efficient approach since my offset or target actually changes as one moves up the corridor. Is there a way to generate a polyline or some other type of entity that could be used as a target?
View 9 Replies
View Related
May 4, 2012
How to create a transition crossfall over a distance in assembly. For example, I would like to get hard shoulder crossfall along the edge of travel lane from proposed 2.5% to tie in the existing (e.g. 1%) over 10m.
View 2 Replies
View Related
Oct 3, 2013
Is it possible in civil 3d to input a cross section of superelevation as parabolic rather than straight section in civil 3d. We are looking at a parabolic bend of 40 degrees.
View 6 Replies
View Related
Jul 13, 2012
I have a grading that, going left to right has a a region of relative elevation, a transition followed by another region of relation elevation.
I need to change criterior of the transition region to another relative elevation with the appropriate transition on either side.
I deleted the original transition grading (with the menu commands) and tried adding the 3rd relative elevation but keep getting prompted for a transition length instead of the relative elevation (I am choosing relative elevation criterior). It seems the feature line doesn't want to let go of the original definition. I should be able to replace that original transition with a new criterior, No?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
View 2 Replies
View Related
Jun 25, 2012
Along my corridor I have different assemblies I used. My sidewalk is curb side in some locations and in different locations there is a boulevard between the curb and sidewalk. I want to transition between these different assemblies and I want that transition to show up in the cross sections I cut. Isn't there a way to tell Civil 3D to transition from one assembly to the next one as you could in Eagle Point?
View 9 Replies
View Related
Jun 27, 2012
my surface is way through the in and out transition of my superelevation. the waves are dependent on frequency (ie if i change from 1m to 5m the waves get longer.
View 4 Replies
View Related
Apr 7, 2005
I watched the cul-de-sac placewhere and I seem to missing some functionality shown. Specifically the ability to link a transition lane to an alignment and profile via corridor properties>logical name>no width shown as the placewhere shows?
View 8 Replies
View Related
Jul 5, 2013
1. We all understand that designing highways is not simple and I don't know in your country but in my area almost all the bridges come at an angle from the alignment/corridor. Now, how can you do that in Civil 3D ?
2. Can you insert an entire shape, let's say a culvert into the design / corridor and be able to show it in the 3d view preciselly like it will be in real ? what about showing it in profiles or sections ?
View 9 Replies
View Related
Aug 1, 2013
I have an offset assembly and I have forced the skew of the second alignment. (Is a simple basic lane + a linkslopebetweenpoints and a markedpoint placed at the left extreme of a basic road assembly)
As you can see, there are errors at the area in which we have the greater angle between cross sections. What are the limits of this C3D feature ? Above more that "x" degrees of cross sections directions difference C3D are going to fail ?
View 2 Replies
View Related
Apr 1, 2013
If I create / import a sub-assembly, where is it stored? Meaning is it embedded in one of the cuix files? What happens when my computer is upgraded? Or acad is re-installed?
What if I need a one-off sub-assembly--meaning that I'll only need it for THIS project? I don't want it in my pallette permanently in that case. Can I delete it from the pallette after I've added it to the Assembly?
View 9 Replies
View Related
Aug 17, 2012
I have a corridor with multiple assemblies along a 4 mile stretch of road. In certain locations the corridor is not not modeling the sidewalk. I checked all the targets and everything is good.
View 1 Replies
View Related
Aug 27, 2013
I have a corridor with multiple baselines and assemblies (not offset assemblies, but different baselines and assemblies).
I am trying to link them together with the LinkToMarkedPoint2 subassembly. From what I have read, this should be possible with this command, but I am getting no links. Am I wrong about the capabilities of this subassembly?
View 6 Replies
View Related
