I'd like to get the Vault file Id from an inventor document on the local workspace in order to be sure that it has been checked in (I want to be sure that all the files on the local disk have been checked in).
View 2 RepliesI started using inventor when he started the job. I have been using Inventor for about 3 years now. My question is that I have always practiced good file management at every level of a project from single parts to large assemblies; however at this new job the file management is horrible, in the last 3 years the company has been through 13 different drafters, thus each drafter was saving files in different location and names making finding parts and assemblies a nightmare.
The problem I am having is that the lead designer is insisting that we implement vault, and that it will solve our problems, However I feel that we needed to develop a universal file and naming convention first, get our file hierarchy in order before we try and implement vault. There will only be 2 of us accessing the cad files and I don't think that vault would even be a good fit for our work flow.
Every time I open a file in Inventor a dialog box comes up that says "Updating file status from vault". In most cases it is not a big deal, but when an 1000+ part assembly is opened this box flashes for each part in the assemly causing a delay in opening the file. Needless to say this is very annoying. So my questions are what is this doing exactly and can I turn it off?
Inventor 2011
Vault 2012 Pro
Windows 7 x64
Inventor Professional 2014 SP1
I try to delete one of version of the file on vault server. When i right-click and delete, it delete all version and original file too.
View 9 Replies View RelatedI thought I had found the answer to file naming nightmares with the autogenerated sequential numbers in Vault. Everything went OK until I renamed some frame generated files with the design assistant and checked those in. Vault obviously doesn't look to see if a file name is already in use because it did not go to the next free number, it just blindly continued with the sequence, ignoring the fact that those names were taken.
Is there any way to have Vault check and keep proper count when parts are added or renamed manually? Or at least manually set the counter to the next available number?
When I try to Check files into Vault from Inventor 2011 and I have, under settings, Create visualization attachment checked, Inventor locks up. Only (1) of (4) machines with this problem. Same machine is using Vista, everyone else is using XP.
Seems to hang up the most when i try to check the .idw. Locks up 50% of the time. Tends to upload parts and assemblies o.k. then hangs up on the .idw.
Windows Vista business 32 bit, SP2
Intel Xeon 5150 @ 2.66 ghz
4 GB Ram
Inventor Suite 2011, SP1 Beta
working on one big file with Vault/multultiple user scenario?
Lets say you design a car and having the frame and the body you have different guys that come in and do electrical, fuel system, so on... They need to work with the frame and the body doing their parts, since thats the reference for them.
But only one guy can check it out. We try the approach that one system is an entire independent assembly inserted into the top assembly but its not perfect.
I want to duplicate & then rename a project I have stored on my vault computer, However I am experiencing many difficulties.
There are probably around 1000 + files in this project-multiple assemblies/drawings & parts. Initially i did a Pack & Go of the Project to my desktop. I then took my first top level drawings & using Design Assistant renamed all the reference parts and assemblies related too it. This worked fine, albeit a very long time to rename all the files.
The problem is that i have say 50 drawing files, some contain similar assemblies/part files which will have already been rename in the first top level drawing & some container different assemblies/parts (which are not related to the first top level drawing) & will have to be renamed separately.
Is there an easier way to duplicate & rename a vault project because design assistant makes this task extremely laborious. An great tool to add would be to 'Find & Replace' a file name & apply it too all the files. Similar to the function in Microsoft Word.
I have looked into the copy design feature in vault however, you can only copy a project within a project, you cannot copy it to a completely new folder in the vault.
The other problem is, is that you can only add a prefix or suffix to every file/related part/assembly, & i would rather replace the project number rather then add the new project number to the file names. This would be a viable option if you could rename multiple files quickly, however this just stems back to the design assistant.
I have a vaulted project with about 1000 parts in it and a subfolder within that that has about 250 parts in it.I am told that vault does not manage references outside the project scope as defined by the IPJ which in theis case is at that 1000 part folder level.
If I go to rename the folder with 250 parts in it, it takes up to a half hour. I am having trouble believing that vault can't do better than a half hour to manage the references of a subfolder of a project with 1000 parts in it, when only 250 parts are affected.
Also, I notice a secondary ipj file is created temporarily during the renaming. That ipj appears under an inventor folder under my docs. Can't see why it takes two ipj files to manage one project. Also don't understand why there should be a local ipj file active when I am renaming at the vault level. I am suspicious that this other ipj (named after my company name, indicating a purposeful act) is expanding the scope of reference management since its parent resides at the root Vault explorer ($) separate of the projecy ipj. Also takes way too long to rename individual files.
i use inventor 2012 and Vault Collaboration 2012.
for file naming format i use numbering scheme rule.
in the vault browser is eazy to show the description from each part, search by description etc.
but when ia want to select from inventor, for example i want to replace component from vault or add component from vault. i can't see this description.
my question is, how to show the description in the file browser from inventor?
I would like to know if it is possible to change the pathfile of the FEA results when the part file is saved into Vault. For example: the part file will be saved in the folder manufactruing, but I would like the FEA results to be saved into the folder miscellaneous.
View 3 Replies View RelatedI tried to use 2012 task scheduler to migrate files, got an error message saying it won't support vault project file. I used vault project file for version 2010.
View 1 Replies View RelatedI already have been updating the DisplayName of documents but this name only shows in the Browser Bar and Title bar in Inventor.
When multiple documents are loaded, there are document tabs shown in het bottom area of the Inventor window, these show the File Name. I would like to show the DisplayName there but I don't knop how.
I'm using:
Win7 x64
Inventor 2011 pro
Visual studio Express 2008 - VB.NET
I am writing a external ilogic riule, which will iterate through all the referenced documents of the active assembly and write certain iproperties to a text file.
The code is below
It works in that the text file is created and it does write the iproperties. HOWEVER it only writes the iproperties from the active assembly
' go through all referenced documents in a assembly . Grab the description,title and part number iproperties
' and print out a list
If Not ThisApplication.ActiveDocument.DocumentType= kAssemblyDocumentObject Then
Return
End if
[Code]....
How can i fix this code so that it writes the iproperties for each oFileRef ?
I tried to print thisdrawing.modeldocument in a vba sub, but it doesn't work.
View 4 Replies View RelatedWe are trying to get task scheduler to automatically download certain files from the Vault. Templates and Styles. The templates work great, but there is no way to specify any filetypes other than Inventor filetypes. Am I missing something? Is there a way to specify non-inventor filetypes?
View 2 Replies View RelatedI've created a pdf file (with illustrator cs3). when I try to open it on photoshop CS3 I receive this message:
"error opening the portable document file (PDF) document. error code = 0X20030055"
I can open this pdf file outside photoshop.no problem openning other pdf files on photoshop.
I inadvertently saved a document as a jpg and wondered if there is any way I can convert it to a document file that is handled more easily with a file that is other than a photo file?
View 1 Replies View RelatedWhen I get latest versions of files from Vault Explorer and then open them in Inventor, the vault status of the files in the Inventor browser shows a triangle with an exclaimation mark inside of it. When I move my mouse over the status icon, it says "vault not open". There is no response when I try to log into the Vault within Inventor.
I upgraded from 2009 to 2010 Inventor and Vault two weeks ago. Everything worked fine until today. Vault Explorer seems to be working fine. The ADMS console seems to also be working fine. I can do all the routine tasks in both programs. The problem is only in Inventor.
I am using the autodesk suit 2011. The problem I am having is when I copied a block from autocad using the copy command, then used the paste command in an inventor .dwg and it inserted as an autoCAD block. When I check the finished drawing into vault the autocad block does not show up and will not print.
View 2 Replies View RelatedWe have a user that has been experiencing problems when checking files into vault. The problem occurs when he copies a design (the drawing and part file) in vault then checks out the files to make changes, saves it and checks it back in, Inventor doesn't check in the changes. The preview window (i.e.. dwf that's generated on check in) is correct however the thumbnail is wrong and when you open the latest version none of the changes have been made.
This is taking up a lot of time because he has to make the changes twice and also has to be constantly looking back in vault to files he has just checked in to make sure they are correct.
We are a mid sized company the builds our parts from raw materials. Steel Coils, Steel tubing, Steel plate, etc.
We are have been migrating from MDT to Inventor over the last few years. We are now trying to implement Vault and integrate that data into our ERP system. We would like to model a part and assembly and check that into Vault then pass the BOM into our ERP system.
It all sounds good up until I looked at how our part files were structured. There is not BOM in an ipt that I have found phantom or referential. Here is my problem
It takes 1 lb of a .0625" thich steel sheet that is 6.5" wide. We stamp our product in a 200 ton press producing a finish componet.Problem 1- Part1.ipt (model of my stamping) does not have a lower level it is a component in Inventor there is no BOM that I have found.Problem 2 - Part2.iam uses part1ipt but we punch a hole in it and push material outward to create a lip so we can lap weld the next part.When I try to extrude this feature I can only cut the part I cannot add material or deform it in any way.Problem 3 - We also manufacture bent tubes. We consume 1.5 ft of part C to make part D. I cannot insert 1.5ft of a part that is 20ft long as we buy it. then we bend it. I cannot insert a 1.5ft part into an assembly and then bend it.
Major problem - even though I can change the dwg file or idw file to add a parts list Vault does not put this information in the Item master BOM.
I have opened Vault for the first time and I don't know how to access it, it wants a username/password/server/database. I am one of two people in the company how use inventor etc so there is no existing server/database within my company so I assume i have to set one up?
View 3 Replies View RelatedWe have a product line that relies heavily on iAssemblies. The main assembly and several layers of subassemblies are all iAssemblies. All the children that needed to be generated so far were added to the vault.
If I activate a different member in the main assembly factory, Inventor wants to update some of the various children. For some reason, vault won't prompt me to check out the children. I get a variety of errors, unless I manually check out the children.
There are at least 20 iAssemblies involved at different levels of this thing, not to mention all the iParts thrown in as well.
I'm using the free Vault that doesn't have a batch print option so I've been writing some code that does the trick.
The code lists open drawings, assemblies and parts, and depending onwhich is selected, displays a list of all the drawings associated with the file and it's sub-components.
Everything is good except that when the list of drawings is populated I am only able to search through the working folder for drawings. This means that if the drawing has been modified by another, or the drawing has not been opened on the local computer, it will not print (or print the old version).
Is there a way to pull the latest files from vault into the working folder automatically? Currently the only way this is possible is by selecting "Get/Checkout" in vault and downloading the files.
A customer has a problem with the add-in of Vault in Inventor. Log In and Log Out options are lost as shown in the picture. The machine already formatted and installed applications again but the problem continues.
View 9 Replies View RelatedI am making a copy design of a big file, two things I need to change manually which takes lots of time:
I need to change the status of files from Reuse to Copy, also I need to change the paths to the right ones as the paths that kick in by default when I change the main directory on the top are not right.
Is there a quick way of changing status of all the files to Copy, kinda shift and highlight or the way Vault renames files with Replace option? With big assemblies connected with 10 drawing files doing it all by hand.
We are trying to migrate our 2010 and earlier inventor files that exists in our vault 2012 professional fully replicated environment to The latest inventor release.
We are trying to utilize the task scheduler. but when attempting to use the "Migrate Files from Vault" and select the option to add folders. we receive several pop ups, one after another. The header states "folder" and in the message box is simply "1000" then an "ok" button.
After clicking ok a half dozen times the dialog finally comes up to select the folder, but the entire vault is not available in the selection window. I have tried this on several machines and 2 different databases. Same result.
I search for a file in Vault 2014 and find it needs refreshing i.e. the double red arrows icon in "Vault Status" column. I hit the refresh button in the ribbon and the file still has the double red arrows icon and doesn't appear to refresh.
Inventor 2014?
I recently installed Vault pro 2013. I was running Inventor 2012 at the time.. My vault add-in stopped loading. I installed Inventor 2013 and the vault add-in still won't load. I've gone to the Add-in manager 2013 and set it to loaded. I hit the "OK" button and nothing. Open the manager up again and it says "unloaded". Something is going on that is not allowing my vault add-in to load.
View 1 Replies View RelatedI am having issues getting my .dwg files to check back in to Vault Basic. I can get all different types of files (.iam .ipt .idw) to check in without issues, but .dwg files hang and Inventor will eventually lock up.
I've tried disabling Visualization and I still cannot make it past this point. I can even tell it to check in everything at once, and it will breeze through the other files but any .dwgs will hang.
My PC Config:
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
16 GB RAM
Dual AMD Radeon HD 6450
Running Product Design Suite 2014