AutoCAD Inventor :: 2014 Pro Addins Not Loaded Vault Ribbon Missing?
Sep 27, 2013Since yesterday The vault ribbon is missing in Inventor 2014 and also add ins are grayed out(not loaded).
win 7 x64 system?
ADVERTISEMENT
AutoCAD Inventor :: Vault Ribbon Missing?
Dec 2, 2011All of a sudden I see that within my Inventor the vault Collaboration ribbon has disappeared. How do I bring this back?
C1
Inventor Professional 2013
Vault Collaboration 2013
AutoCAD Inventor :: Vault Icon Missing From 2013 Ribbon?
Apr 17, 2012Just installed inventor 2013 and the icon to launch vault is missing from the ribbon where it used to be in v 2012. Also when i try to open a file the quick link to vault is not there. i have installed vault basic 2013 and it opens up fine and my files are in it. Do i have to create a link?
View 2 Replies View RelatedAutoCAD Inventor :: Vault Tab Disappears From Ribbon
Jun 5, 2013When I open up Inventor 2014 the Vault tab is visible in the ribbon; however, when I create a new file (of any type) the vault tab disappears from the ribbon. I can retrieve it by right clicking on the ribbon, clicking ribbon appearance and selecting reset ribbon. This fix is only temporary because if I close out Inventor and re-open it I must go through the same steps to retrieve the Vault tab in the ribbon. Any way to make it stay in the ribbon so I don't have to reset the ribbon every time?
After digging a bit more I came across the answer: [URL]....
AutoCAD Inventor :: Map Folders On Vault Ribbon Is Grayed Out?
Apr 22, 2013I am very new to Autodesk products, I never used any of them before. I just purchased a student license and I downloaded Inventor Professional. This is the 2013 version, 64 bit edition. I also downloaded Vault Basic 2012.
I am trying to learn how to use these tools and one step in this process is to map the working folder in Inventor to Vault so files can be checked in and out, so I created a new vault, added users and groups, and that went without any problem.
Then, in Inventor I log in to this new vault. All the other buttons, (Open, Place, Check In and Check Out) are grayed out at this time. Reading the literature, I got the instructions to click on the Vault ribbon in Inventor, then on Access and "Map Folders". But at this point I cannot proceed because this menu item is grayed out as well.
AutoCAD Inventor :: Vault Ribbon / Browser Not Working
Jun 25, 2012I have noticed today that my Vault ribbon is not working. I can log in / log out of the Vault and navigate to the Vault explorer. Also in the browser I only have access to model and favorites. It acts like the Vault project is not active.
The project file is active and mapped properly and I can check files in and out via the Vault explorer. I have also installed updates dl19384851 and update 1 for Inventor.
I am running Windows XP Pro x86 & Vault Professional.
AutoCAD Inventor :: 2014 - DWG Will Not Check Into Vault
May 29, 2013I am having issues getting my .dwg files to check back in to Vault Basic. I can get all different types of files (.iam .ipt .idw) to check in without issues, but .dwg files hang and Inventor will eventually lock up.
I've tried disabling Visualization and I still cannot make it past this point. I can even tell it to check in everything at once, and it will breeze through the other files but any .dwgs will hang.
My PC Config:
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
16 GB RAM
Dual AMD Radeon HD 6450
Running Product Design Suite 2014
AutoCAD Inventor :: Ensure Vault Ribbon / Addin Loads Within 2011?
Aug 13, 2013Is there an easy way to ensure the Vault ribbon/addin loads within Inventor 2011?
AutoCADM 2011 SP2
XP 32-Bit SP3
AutoCAD Inventor :: Error Checking DWG Into Vault Basic 2014?
Jun 4, 2013Installed Product desgin suite 2014. I can create a new inventor dwg file and place a base view of an assembly into it. I then attempt to check it in and it causes Inventor to not respond and eventually crash. When I reopen the dwg from my working folder and attempt to check it in again it gives me an error saying that the file already exists.
View 1 Replies View RelatedAutoCAD Inventor :: Vault Missing Buttons?
Apr 9, 2012A customer has a problem with the add-in of Vault in Inventor. Log In and Log Out options are lost as shown in the picture. The machine already formatted and installed applications again but the problem continues.
View 9 Replies View RelatedAutoCAD LT :: The Ribbon Does Not Have Any Tabs Or Panels Currently Loaded
Nov 10, 2011I accidentally deleted my menuload ACADLT.cuix and my AUTODESKSEEK.cuix i found and reloaded them and now my Ribbon is gone. If if type ribbon in the command line "The Ribbon does not habe any tabs or panels currently loaded." appears.
View 9 Replies View RelatedAutoCad :: The Ribbon Does Not Have Any Tabs Or Panels Currently Loaded
May 17, 2008when i load autocad it says "The ribbon does not have any tabs or panels currently loaded"
ive tried everything i can find and cant make anything show up there. im on page 4 of 800 in my AutoCad book and it doesnt say what to do if nothing is there in the way of tools to use.. how can i make my toolbars appear? ive tried typing "ribbon" but nothing...
AutoCAD Inventor :: RGS File For AddIns
Jun 21, 2013When using the wizard to create Inventor AddIns a file with extension rgs is created too.
View 1 Replies View RelatedAutoCAD Inventor :: Missing Ribbon Text
May 3, 2012Theres no text on the ribbon bar. So far, I have tried switching from classic to ribbon UI, changed the font size from the application options, reinstalled and uninstalled twice, cleaned my PC of registry errors, system restored to the time i didnt have this problem.
View 3 Replies View RelatedAutoCAD Architecture :: Ribbon Does Not Have Any Tabs Or Panels Currently Loaded
Mar 3, 2009This morning after no problems yesterday.
"This Ribbon does not have any tabs or panels currently loaded."
It was there yesterday until I quit ACA, where did it go?
Did Autodesk install a virus that deletes the Ribbon after a predefined number of uses? It doesn't make any difference which workspace is invoked it is not there. In Document it is just completely gone and typing ribbon at the command line brings up the "This Ribbon..." as is the case in all the other workspaces. How does this happen?
AutoCAD 2010 :: The Ribbon Does Not Have Any Tabs Or Panels Currently Loaded
Mar 14, 2010My Ribbon is blank and says, "The Ribbon does not have any tabs or panels currently loaded."
I have tried "reseting" my CUI acad.cuix file and restoring it and it won't work -- I heard that was the golden ticket to my problem; however, my ribbon still says it doesn't have tabs or panels loaded...I've tried restarting AutoCad and then reseting my main cuix file as well.
AutoCAD Civil 3D :: The Ribbon Does Not Have Any Tabs Or Panels Currently Loaded
Aug 17, 2010My IRM officer had to install some sort of update to my AutoCAD Civil 3D 2010 package. When I loaded AutoCad, it gave me a message where my ribbon was that "The Ribbon does not have any tabs or panels currently loaded." I was able to fix this with the WSCURRENT command, but when I switch to the "Task-based Geospatial" or the Tool-based Geospatial" module, I cannot get the Ribbon back.
View 8 Replies View RelatedAutoCAD Inventor :: 2012 Ribbon Missing (interface Change)
May 6, 2011i opened inventor pro 2012 and my interface is different and my ribbon is missing. i tried restarting a number of times with no change. I tried a repair with no change. I might try a reinstall.
Dell t1500 i7 8 gb ram
Windows 7 64 bit
ati firepro v4800
AutoCAD Inventor :: Worth Disabling Default Addins (Studio)?
Sep 26, 2012(Inv 2010 Win7 64bit 8GB RAM)
Firstly is it even worth disabling things like Studio/Frame generator/content center in the Add-in manager if I never use them? I was hoping to at least reduce initial load time for inventor.
Secondly, do i need Win7 admin permission to do it? When I uncheck 'Load on Startup' settings in the Add-In Manager they just re-check themselves.
AutoCAD Inventor :: Opening DWG In 2014 - Annotations Missing
Oct 15, 2013I have a coworker who opens an Inventor 2014 (Inventor .dwg) drawing in AutoCAD Mech 2014 and only the views show. No annotations, titleblock, or border. If I open the same drawing in my AutoCAD Mech 2014, the drawing appears correct. Both have service pack 1 applied to Inventor and AutoCAD 2014...
View 7 Replies View RelatedAutoCAD Inventor :: Layout Constraint Tool - Missing In 2014
Jun 10, 2013Where the "Layout constraint" options have gone in Inventor 2014?
Last seen in Inventor 2013 on the right-click menu of a part created through the "Make components" workflow, this invaluable tool has been abducted.
AutoCAD Inventor :: 2013 To 2014 Migration - Missing Files
Oct 28, 2013We've finally nibbled the bullet and upgraded to 2014. I'm getting errors in the Task Scheduler logs about missing files in various projects. It would appear that (almost) without exception, the failed files are all Content Center parts that were inserted as custom parts. Do I need to run a migration on the Content Center parts (Inventor/ContentCenter Files/R2013/en-US) in order for the custom parts to migrate properly?
View 9 Replies View RelatedAutoCAD Inventor :: 2014 New Install - Missing Green Dot And Invisible Icons In Nav Bar
Jun 1, 2013Have installed inventor 2014 as part of the Product Design Suite Premium 2014 & have a few issues.
1). In sketch mode when drawing a line/circle etc there is usually a green dot in the centre of the crosshair, this is not vissible at all making it difficult (if not impossible) to see where the cursor is snapping to. The same happens in the drawing mode when dimensioning. I've checked the options but can't see anything obvious.
2). The icons in the 'Navigation Bar' are invisible, I've checked the opacity levels & irrespective of the setting they are still invisible. You can hover the mouse pointer over where they should be & they work, they're just not visible.
Also, the close, minimise & restore down icons in the top right corner are also invisible. Similar to the navigation bar issue, they work, they're just invisible.
Have tried uninstall & reinstall, & have downloaded & installed the update, but this doesn't solve these issues.
3ds Max :: Possible To Use Ribbon From 2013 In 2014
Jun 6, 2013Is it possible to use the ribbon from max 2013 in 2014?I spend ages customizing a lovely ribbon with all my most used tools and would like to just transfer it over, rather than spend hours rebuilding it for 2014.
View 3 Replies View RelatedAutoCAD LT :: Ribbon Icons Missing?
Aug 14, 2013I am trying to find the individual icons in the ribbon back in my Autocad Lite. For example all the small icons under the "Clip" tab have disappeared.
How do I get them back?
AutoCAD Architecture :: Missing Tabs In Ribbon?
Jun 13, 2011In AutoCAD Architecture 2011, some of the tabs are missing. One is the Insert tab. So I can not insert an xref.
how to regenerate the ribbon...if that is what I need to do.
AutoCAD 2013 :: Layout Tab Missing From CUI And Ribbon
Jul 25, 2013I need to create a section of a 3d model. Unfortuntaly the layout tab I need is missing. Normally if somthing is missing I type 'CUI' and then click Ribbon>Tabs> select the one I want and drag it to 'Workspaces Contents' - 'Ribbon Tabs'
The ribbon tab for layout is missing from the cui. See attached images.
How can I get the Layout Ribbon Tab back quickly?
Tutorial I am trying to follow; [URL] .......
AutoCAD 2013 :: MEASUREGEOM Missing From Ribbon
Sep 19, 2013I am using a full version of 2014 plain vanilla AutoCAD. More recently I have had the utility panel (that contains MEASUREGEOM) and the export panel pulled down in the work area for ease of access. The utility panel has disappeared completely, and sometimes I find the export panel hiding on the far right side of my screen with just a little bit of it sticking out. I right click on the the home tab and open "show panels" and I don't even see the utilities panel as an option to check or uncheck. I wonder if the utility panel is hiding beyond my screens view, but am unsure how to easily explore this possibility.
View 2 Replies View RelatedAutoCAD 2013 :: Missing Ribbon Panels
Mar 22, 2013I just upgraded to 2013 map to a different computer. I loaded my 2012 profile and other than having to load the profile every time, I also do not have most of the ribbon tabs which I had upon the initial installation of 2013. After about 2 days I lost all od my map ribbon tabs, and at the same time my cui stopped loading automatically.
What is going on with this 2013 thing? It seems there may be a serious need for another hotfix or service pack.
AutoCAD 2013 :: Missing Ribbon And Keyboard Shortcuts?
Oct 29, 2012In the process of migrating from 2010 to 2013, all seemed okay at first. Now when I open 2013 i have no ribbon and my keyboard is no responding to shortcuts. For example in 2010 is used the keyboard i key to insert blocks.
View 7 Replies View RelatedAutoCAD 2013 :: Missing Layout Icons In Ribbon?
May 2, 2013i miss my "create view" etc. buttons in my layout ribbon. Where can i find an option to make them visible?
View 4 Replies View Related