AutoCAD Inventor :: Check To See If LOD Exists Then Create Ilogic Rules Around It
Mar 27, 2013
I have an assembly with parameters named the same as LOD's.
The parameters are set to equal the mass of the corresponding LOD's using ilogic.
If the LOD does not exist, I want to set the mass of the corresponding parameter to a value of zero.
I don't know how to check for the existence of the LOD and I'm not sure I can have three commands in the ELSE section.
Below is an example of what I need using a Parameter and LOD called EXTERNALS as an example.
If EXTERNALS LOD does not exist
THEN Parameter("EXTERNALS")=0
ELSE
'activate the EXTERNALS LOD
ThisDoc.Document.ComponentDefinition.RepresentationsManager.LevelofDetailRepresentations("EXTERNALS").Activate
[code]...
View 2 Replies
ADVERTISEMENT
Nov 8, 2005
The following code adds three user parameters to an .ipt:
Public Sub AddUserParams()
Dim oDoc As PartDocument
Set oDoc = ThisApplication.ActiveDocument
[Code].....
If I run this on a part that already contains any of these user parameter names I get an error. Is there a way to first check for each name and skip to the next if it already exists?
Also, how the heck do I set ExposedAsProperty for each of the parameters added?
View 5 Replies
View Related
Apr 9, 2013
I am simply trying to traverse an assembly, check each component for existance (or value of) an iProperty, and if so add that components name to a list. Here is what I have, but it doesnt work.
'Define the open document
Dim oDoc As Document = ThisDoc.Document
Dim oRefDoc As Document
[Code].....
View 1 Replies
View Related
Nov 19, 2010
I have a iLogic question about finding out if a View exits..
Lets say I have a drawing that I want to read the scale of a view.. All the snippets I have found is pointing to the name of the view like "VIEW1". But if I have deleted the first view I created it will give me an error..
So, is there ant possibility to check if the "VIEW1" exits without getting an error?
View 9 Replies
View Related
Mar 29, 2011
I am currently using a vb.net application to control inventor using the API code.The API code is used to delete/suppress unwanted occurances from parts and sub-assemblies, depending on what is selected in the external application. It then puts all the parts and sub-assemblies together into a final assembly.
Most of the parts contain iLogic rules, to control dimensions, and these have been set to trigger when the part file is opened.I have noticed that in my final assemblies some of the parts don't appear as they should, however if i close the final assembly and open the individual part it appears to be correct. If i then open the final assembly it looks fine.
I think this might be due to the iLogic rule being triggered when the part is opened.Is there any way to trigger the rules using the API code while the final assembly is open, instead of closing it down and opening all the component parts and sub-assemblies?Or should we set the rules to trigger on a parameter change?
View 6 Replies
View Related
Jul 23, 2012
I'm trying to set a rule in which i have 2 i parts that i can change the length of . I want a rule where if i change one of them it changes the other to fit with it.
View 1 Replies
View Related
Oct 1, 2012
I made a simple rule that triggers before save to ask user to make a selection, which then updates an iProperty.I created A multi value fxParameter and used the InputListbox function.
Ultimately I want to know the best way ok making this rule available to all parts, old and new.I am thinking, it will be easy enough to update my templates and embed this code into the part, as well as content center files by updating each file / template .
But for existing parts, is there a way to add these rules without the user having to do much steps.because there is an fxParameter I am thinking the user will have to know how add this to their part.I can change it to just an input box where they can type in the correct value, if that would be easier.
View 6 Replies
View Related
Sep 8, 2011
I have been having trouble with parts that do not trigger iLogic rules. I've set the triggering events to After Open Document, but nothing triggers. I must manually open the parts and then click the iTrigger to get the rules to run. This is not all parts only a select few and seemingly random.
Is there something I can do to ensure the triggers fire and the rules to run?
Sidebar: If a part is set for trigger After Open Document should that part trigger the rules when the assembly that the part is in is opened?
View 9 Replies
View Related
Oct 3, 2011
I am very new to this whole concept of having ilogic based rules to drive your part design. I have even gotten as far as creating a ipart and having ilogic rules be able to suppress, unsuppress, change values and dimensions using ilogic rules. I now want to be able to use ilogic rules to drive some of the various(yet similiar) assemblies that I create all the time.
For instance, If I have just a flat plate as the base component with a shaft welded to it that varies in length for my assemblies. Since the shaft varies in length, I went ahead and created iparts for all the lengths of the shafts. I can manually change which shaft I want represented in the assembly, but I would like to to know how do I get Ilogic to place the different shafts based on user parameters???
I've looked into component place iparts, but can't seem to get the code to work. The list of iparts tree within the model doesn't pop up in the model tab in the ilogic rule, only the base component.
View 1 Replies
View Related
Mar 1, 2012
Can I use an iLogic Rule at the top assembly level to "replace all" of a particular component is that component resides in more than one subassembly? I need a rule to run and globally replace the component in all subassemblies without opening up each subassembly manually. I can run a rule in the individual subassembly that looks like the following:
If GoExcel.CellValue("3rd Party:Embedding 1", "Sheet1", "A2")=800 Then
Component.Replace("Part1:1", "OtherPartfilename.ipt", True)
End If
Is there a way to run a "replace all" command from a top level assembly?
View 1 Replies
View Related
Jul 5, 2012
We have some Problems with the running order of iLogic Rules.
I try to describe it in an Example, you can find attached. (The description (PDF) and the ipt-file)
We're using iLogic via Addin in Inventor 2010. But I also tried it, with the 2012 version (the same problem).
The attached IPT File is running in the correct order.
View 2 Replies
View Related
Apr 1, 2012
I am trying to build a set of scripts (aka iLogic rules) into templates. So far, quite a common task. One extra requirement is that the scripts need to be updatable after parts have been instanciated from the template. That is, we do not want to update all of the ipt each time a new material option is added to the script. That means that external rules are the only way to go, right? This is the road I tried and it seems to work on my machine.
One extra requirement is that the whole project must be shared between several workstations. We went the Subversion road for that (for all the Vault comments). The scripts are distributed properly and in the same absolute location on the two test machines, all good (I checked the md5 on both side and they all match). The application options on all the machines are all set the same way (export the xml file, check it in the source control, import on all the machines restart). The iLogic search path is also updated, but manually this time, since it is not included in the application options export. It should all work perfectly right? Well, sort of....
I did create a tiny assembly from the templates. On my source machine, all looks good. The ilogic rules are both listed in the ilogic browser and the triggers are set when I instanciate from the template. This is the intended behavior. Now, I close inventor, copy the whole directory to a new machine, open inventor there and open the project. The rules do not appear anymore in the browser, but they are still listed in the trigger list (wtf?). The best part is that if I do not touch anything, stuff still works! The scripts are found and run properly!! Now, if I have to change the triggers or even find the rule in the browser to run it manually, well, bad-stuff-happens (tm).
All the files in question are indentical on both machines, the ilogic files, the ipt files, the application options export, all with the same hash. The ilogic search path is also set the same as are the absolute paths. It should work the same (tm).
Me sending a copy of the files is not likely to work though. Since the problem happens when you copy. I could try to "pack and go", but that would break reason #1 for doing that, which is keeping only one version of the script and adding materials at only one place for all the projects.
View 4 Replies
View Related
Nov 29, 2012
I have 3 iLogic Rules that I use with my idw's,
1-SCALE - is to update scale in the title block
2- WEIGHT - is to update weight of model in title block
3- PDF - is to create a pdf version of drawing in same location as idw
all are triggered by saving the drawing.
These work fine, but sometimes when I create specific types of drawings there is errors, which is no big deal, just a prompt appears and I press ok and everything is fine.
With very little to no iLogic programming knowledge, is there a way to edit to rules so that if there is an issue, the rule knows it is ok and saves without the little prompt appearing?
Example of when errors occur for:
SCALE - sometimes I create drawings on my template just using create sketch, I don't place a base view so therefore there is no model information. which makes it hard to produce a scale. (see image, error -1)
WEIGHT - occurs during the same instance as above, only a sketch is saved on the idw. (see image error -2)
but I also have an error occur when creating a drawing from a presentation file. I create a presentation file from a specific level of detail from an assembly. and I get an error when saving . (see image error-3)
I understand the first 2 errors because there is no physical data to get this information from, so I am hoping an edit to the rules can bypass this issue. But the 3rd error doesn't make sense. It is from an actual model, but I guess the physical properties get lost from an .iam to .ipn?? or is there a setting that can be toggled to carry over model properties?
Inventor Pro 2013
Rules are below:
'Scale
Public Sub Main()
On Error Resume Next
'Get the drawing document
[Code]....
View 6 Replies
View Related
Aug 18, 2011
Is it possible to create something like a password or other trick to protect ilogic rules from editing? Ilogic can enforce standards but if any engineer can delete rules or edit them then we have a problem.
View 4 Replies
View Related
Jul 31, 2013
I have a dedicated folder for external rules on a network. In the Advanced ilogic configuration interface on my machine I added the path to this folder in the External rule directories.That seemed to work fine. I opened the ilogic tree activated the external tab and the external rules were available for selection.
Today I tried to do the same process however no rules were visible under the external tab. I had to select "add external rule" and navigate to the folder.I do not want my users to have to manually navigate to the folder. Is there a step i have missed in this process? I am using Inventor/ilogic 2009.
View 9 Replies
View Related
Aug 23, 2012
How do I change the document units using iLogic rules.
View 3 Replies
View Related
Feb 29, 2012
How do I turn sketch visibility on and off using ILogic rules.
View 3 Replies
View Related
Mar 7, 2013
I am having a problem with Inventor 2013. Every time I run/edit then run an iLogic rule my Inventor crashes. I have sent the report in to autodesk, but I need a fix for now.
I have tried a soft reboot, hard reboot, only opening inventor while no other programs are running, disconnection from the internet, etc.
View 1 Replies
View Related
Dec 5, 2012
I'm a contractor, I've created a really impressive form-driven assembly containing various iLogic rules. However, as i add more rules it is beginning to slow down (increase rule processing time). Should I suggest upgrading to 64-bit and increasing RAM?..could be costly with no increase in performance.
Processor: i7-2600
OS: 32-bit
RAM: 4.00GB
Inventor 2012
View 2 Replies
View Related
Aug 10, 2012
I made an Part with iLogic rules, let's call it "iLogicPart". The rules inside could create lot of different part by my input.
I want save the different parts to different name as "Part 1", "Part 2", etc. I used SaveAs to get them.
My question is: I want to delete all rules and parameters in the saved parts as "Part 1", "Part 2". And I have lot of features (the name is hard to track) which are inactive, I want to delete them at same time too.
I could manually do so, but I want to use rule to do so automatically.
View 9 Replies
View Related
Nov 22, 2013
I am just starting to use ilogic for some design files. We have two design sites connected with Vault Collaboration 2012.
What is the best practice for sharing the ilogic rules between the sites?
I was planning on making an ilogic rules folder at the root of my workspace and having Vault manage the external rules. However, I don't see the rules listed when I check-in a file that uses them.
Do I have to add the rules to my template files? If so, how do I make changes to the rules without editing every file created with the templates?
We will be moving to Vault and IV 2014 after the first of the year, if that makes any difference.
View 7 Replies
View Related
Jul 17, 2013
I have a wire trough that we typically use on all our units. Instead of modelling each trough as it's own separate part to length, I would like to add this part to frame generator for tracking there cut lengths etc...
A few items, there is two sizes that we use, but for now I will work with just one.
I have modeled the part and renamed the important parameters.
-WIDTH - stays the same
-HEIGHT - stays the same
-LENGTH - adjusted by frame generator
-RIBS - the part has 6 currently, but there is a rib added for every 1/2 inch. it is a rectangular pattern
-SLOTS - will be added to the trough every 2 inches of length, it is a rectangular pattern
-SLOT_DISTANCE - is 2 inches and never changes, if the trough is cut on a slot, which ever is easiest, to show half a slot or none, doesn't matter, this is just for a visual and BOM reference
I found a video that shows me how to publish parts to FG, but I am stuck for the iLogic part. Part attached.
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
View 6 Replies
View Related
Sep 26, 2012
I'm currently trying to make an automated fence generator with Inventor 2012 driven by iLogic rules.
My model is done now, and my BOM information (description & part number) is set correctly.
Now is my problem some parts are not supposed to be in the BOM at a certain moment.
Example.
If fence_type = 1 Then
Beam-001 = default
Else If fence_type = 2 Then
Beam-001 = reference
Else If fence_type = 3 Then
Beam-001 = reference
End If
But what do write to set BOM status of a part?
Inventor 2013
View 5 Replies
View Related
Dec 4, 2012
We use iproperties to describe our parts and have a 40 character limit. Is there any way ilogic could be used to check and possibly warn if an iprop field exceeds 40 characters?
Inventor 2010 Pro SP4, Vault Collaboration 2010
HP Z820 Xeon E5-2643 0 @ 3.3Ghz 16.0GB RAM
Nvidia Quadro 5000
View 5 Replies
View Related
Jul 29, 2013
I need to create a form with several options, corresponding to parts to load/unload. Only 1 checkbox can be activated at a time, so when I check a check box, the others have to be unchecked. In VB this should be radio buttons, is it possible to have the same issue in iLogic with checkboxes ?
View 3 Replies
View Related
May 26, 2009
I'm trying to copy sheets from one dwg file to another in Inventor 2010. I get the error: "Named segment already exists: cannot create or rename". The sheet name is not listed in the target file. Why this error is occurring and how to fix it?
View 9 Replies
View Related
Jan 8, 2014
I'm wondering if it is possible to check-in drawing into vault using i-logic?
If you check-in a drawing into our vault, it automaticly exports a .dwf to a storage server. We also have a simple button for making .pdf of the drawing to sent to the customer.
What i want to ensure is that the .dwf file and the .pdf file are the same. So when i press "make a .pdf" the rule will save my document, make a .pdf and (if possible) check it into vault. So from that point the .pdf for the client and the .dwf on the server are the same.
Inventor 2013
View 2 Replies
View Related
Aug 5, 2013
how would I go about to check if a textframe with specific content exists in a document and if it does then procede with a function?
if ("word" exists) { make a new layer}
I just need it to check if one instance of the word exist
View 8 Replies
View Related
Nov 15, 2013
I'm making some ilogic code for my new drawing templates and I'd like run part of the code only when the rule is trigger by the "after open document" trigger. Is there a way to check which trigger started an iLogic rule or would I be stuck making a second rule which is only triggered by the "after open document" trigger?
View 2 Replies
View Related
Oct 6, 2011
I've done an Addin which contains a "Place iLogic Component" function. This funcion work properly and the iLogic form is opened at place component time. Now, i would like to be able to open the form after the insertion, for edition purpose. So, i'd like to open the iLogic form of an assembly component (occurence) with the context menu for example.
So, my question is : Is there a way to check if a part or an assembly contain an iLogic form and to open it through Inventor 2012 API ?
View 2 Replies
View Related
Feb 15, 2013
At my company we use part numbers as file names for everything. for example, part number 09090P00100000, will be saved as 09090P00100000.ipt and will have a drawing saved as 09090P00100000.idw.
Within the drawing template file, i want to set up an ilogic rule that will check that the part present in the drawing corresponds to the file name of the drawing. This rule will run after saving and will just display a warning if the file names do not correspond.
I just need some code that will get the file name of the part displayed in the drawing. Note that we use iparts so the code must get the member file name and not the factory file name.
Dim oDrawingDoc As DrawingDocument
oDrawingDoc = ThisApplication.ActiveDocument
Dim oSheet As Sheet
oSheet = oDrawingDoc.ActiveSheet
[Code] ........
Autodesk Inventor Professional 2011
Windows 7 Enterprise, 64-bit
View 8 Replies
View Related
