AutoCAD 2010 :: How To Create Filters Both Positive AND Negative In Parameters
Sep 9, 2013
I have in the past needed to create filters that had both a positive AND a negative in the parameters.
One of my most common examples: Layers in a specific XRef with names that do not contain specific string.
I tried XRefName|*[~anno]* and it gave me ALL the layers from the XRef (including the ones with anno in the name).
I also tried XRefName|*~anno* and it didn't list ANY layers.
It it possible to do this? I've read throught the docs on using wildcards in the filter properties but don't see anything.
View 3 Replies
ADVERTISEMENT
Feb 11, 2013
I have scanned a negative. Where is the option to create a positive image from the negative image?
View 1 Replies
View Related
Aug 13, 2012
How can I take a scan of a negative and convert it to a positive image with cs5?
View 2 Replies
View Related
Feb 27, 2009
I am photographing 2 1/4 negatives with a CANON 50D and macro lens. Then in Photoshop CS3 I was looking for the filter to convert the negative film file into a positive file so I can work on it with Adobe and then print in on my Canon printer.. I have tried to sample the orange base color and take that out and then invert and then increased the contrast curve.
View 1 Replies
View Related
Jun 21, 2013
I have just scanned a color negative into photoshop and lo and behold it comes up on screen as a color negative. How do i now convert it to a positive so that I can work with it.?
View 11 Replies
View Related
Nov 5, 2013
I have Premiere elements 10 I need to know how to change a negative to positive image
View 1 Replies
View Related
Jun 20, 2013
I can't find a way to turn a negative image into a positive one. !
View 3 Replies
View Related
Jan 20, 2011
I have created a column graph with a large amount of data. I would like to apply two different colors to the positive and negative columns. Whenever I click on a column and go to object>graph> the column section is unavailable. I checked to see if the graph had become ungrouped, even though I never selected it. If I select the graph as a whole it does not say ungrouped. When I select a column the ungroup tab is greyed out. Does that mean my columns are ungrouped?
View 6 Replies
View Related
Jan 18, 2013
I am a newbe with pro4. How do I change a scanned negative image to a positive image? swap black for white and vis versa?
View 10 Replies
View Related
Jun 18, 2012
I need a plugin that can invert positive and negative space with transparency.
Example: I have a filled square in the middle of a transparent image. I use the plugin, and the square is now transparent, where as the originally transparent space is now filled.
Visual example:
Of course, I need this to do more complex shapes. Also notice the blur is accounted for.
View 8 Replies
View Related
Dec 25, 2012
I can scan and preview an b/w negative but it will not show up on the work screen after being scaned. I can scan a b/w neg and then reverse it to a positive for printing !!!!!!
View 2 Replies
View Related
Sep 20, 2012
I have some old black and white negatives I would like to caonvert to make prints. How to do this in Elements_7?
View 5 Replies
View Related
Sep 14, 2012
I want to image trace this photo to create logo. However the way the logo will be applied means that there can be no negative space less than .35mm or 1pt or the heat transfer will have them blend together.
How can I image trace while maintain all spaces (both positive and negative) are atleast 1pt sq?
View 3 Replies
View Related
Aug 1, 2013
Imagine I create a line in a sketch angled at 12 degrees (above the x axis) . Then I create another line in the sketch angled at 12 degrees (below the x axis)
When I list the parameters programatically both give me a value in radians of +12 degrees.
So where is the specification of the angle direction stored? As a user I cannot input a negative angle, but I can see that it is negative. But how does a program know the true value of an angular parameter? Currently I get +12 for both lines.
View 3 Replies
View Related
Feb 9, 2013
How can I convert negative image to a positive image in Lightroom.
View 2 Replies
View Related
Sep 12, 2013
I have photographed some colour negatives in RAW. Any outline of a process as to how to convert these to positives using Lightroom v5. I have tried and failed!
View 6 Replies
View Related
Sep 20, 2013
I am trying to make a dynamic block below. I need the "end" of the line to be "moveable". I've tried the point parameter and the stretch action with no luck.
View 9 Replies
View Related
Dec 14, 2012
I am editing raw color images in PS CS6. I process them through Adobe Camera Raw into PS. When I apply any of the B&W Sketch filters to the image it changes the image to a B&W negative rather than a B&W positive. The color filters work normally on the same image.
View 2 Replies
View Related
Jun 8, 2012
I've created a surface into Civil3D by importing a LandXML file created from contours in a .dgn file. When I create profile views for the alignments, the elevations are shown negative (-500 to -20) where as they have to be in between 500 to 670. Also when I run the surface elevation analysis, all the elevation are shown in between 1000 to 2200 inches as shown in the figure attached.
Am I missing any conversion or some settings when importing the surface.
Windows 7 x 64
Nvidia Quadro 2000
24 GB Ram
i7 960 @ 3.20 GHz
Civil 3D 2012
View 6 Replies
View Related
Sep 10, 2012
I am setting up a table to automatically calculate plumbing fixtures based on occupancy count.The problem I have is creating a formula for plumbing fixtures for B occupancy where toilets are required at 1 per 25 for the first 50 occupants and thereafter 1 per 50 occupants. (International Building Code)
A simple formula for 1 at 25 would be "value/25" whereby the value would be a cell content (occupancy number).
Taking this further with a formula like "(value-50)/50+(value/25)" works fine as long as the value (occupancy) is greater than 50.
If the value is less than 50 the first part of the formula (value-50)/50 creates a negative result.
Is there a way to convert a negative result of the first part of the formula to a 0 (zero)
View 3 Replies
View Related
Jul 11, 2013
How do i create an image in PSE11 to look like a negative strip? I have been able to do this in the past in older PSE but i cannot find the option in this version.
View 3 Replies
View Related
Jul 11, 2013
How do i create an image in PSE11 to look like a negative strip? I have been able to do this in the past in older PSE but i cannot find the option in this version.
View 6 Replies
View Related
May 23, 2013
Does Autodesk have the option to have a drop down for the layer filters, similar to the chose layer dropdown?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
View 3 Replies
View Related
Feb 22, 2012
I am currently working in AutoCAD 2012 and have been creating dynamic blocks for a while now.What i am running into is this: When i create a Look up Parameter and add all of the necessary parameters (flip1, flip2, visibility and distance) to the block, it acts as it should. However, when i select the LH or the RH look up state the check mark defaults back to the "Default" state. If the "LH (Reversed)" or the "RH (Reversed)" state is selected, the check mark will stay on the selected state.
In AutoCAD 2009 i know that if you set the "Custom" look up state (found at the bottom of the look up window) to the first listed state, it will correct this issue. But in 2012 this is not the case.
View 0 Replies
View Related
Sep 17, 2010
I created an assembly, so far with one part in it. I created an Excel spreadsheet with several dimensions in it that would be used in the assembly parts. I went to Manage>Parameters and linked the spreadsheet. The Excel file appeared in the Parameter Dialog Box with the parameters included in it. However, when I create a part in the assembly and attempt to dimension a sketch in it, the parameters option in the dimension box is not present.
I have done this in the past in IV2009, has anything changed that I cannot do so in 2010?
View 9 Replies
View Related
Nov 12, 2012
I have created a simple L-shaped dynamic block with a lookup table for its height and length. In addition to the ability to pick the right value pair using lookup table (HxW) I have added the ability to stretch the height or length using a stretch grip and a list of values. Is it possible to make the length automatically adjust to a corresponding value from the lookup table if the height is changed and vice versa?
View 1 Replies
View Related
Mar 4, 2010
I use point filters allot when measuring distances. I noticed today using Full CAD 2010 that when i measured a distance (Say 2m) using a "Y" point filter, between two objects not directly below one another the answer i got was wrong. It seemed to give me the distance of where my crosshairs where at the time of finishing the command.
I have tried this on another full system of CAD 2010 and a light version. Problem occurs on all.
I know that if you just measure between the points CAD will give you the (-Y) answer in the command line, but using point filters is an old habbit hard to kick.
View 7 Replies
View Related
Jun 16, 2010
My layer filters are not working on the ribbon, why and/or if this is an autocad bug.
I created one for hiding Xref layers, which is an inverted filter. it works on the "Layer Properties Manager" but does not work on my ribbon layer menu. If i turn on the old layer dialog it is working in there.
I know there are many differnt views about the ribbon so i dont need any of the comments telling me to turn it off and get on with it etc.
If you look at the attached images you can see the screen shots of my problem. Note that i have the layer settings correct. Autocad Help says that if the "apply filter to layer toolbar" is on then it will apply this to the ribbon. which it does not.
View 9 Replies
View Related
Jun 21, 2012
Is this functionality still available. I have seen several threads that mention it being available on some people layer manager, but I don't have it on either. See attachment. I remember there being a registry key you could add or change to the tools, but when I did that I always got two errors in drawings that would appear every audit.
View 6 Replies
View Related
Aug 3, 2012
how to create a check box for parameters in forms in inventor 2013, i have modelling a door which contains to many types of locks and where they are placed so i need to create check boxes to pick multiple items so i need to know how to insert them.
View 8 Replies
View Related
Jan 26, 2012
Is there a way to create a table to display parametric information -- either Dimensional Constraint Parameters or User Parameters? This can be done with Inventor but I haven't yet found a way to do this in AutoCAD. I've also considered Data Extraction but this doesn't seem to recognize parameters.
View 1 Replies
View Related